Your cart is empty.
Your cart is empty.Product Description
Specifications
Connections
- Black Clip - Used to connect to the negative terminal of battery
- Red Clip - Used to connect to the positive terminal of battery
- Pulse Output Terminal - Used to connect to the injector to be tested
- Power Supply: 12V Vehicle Battery
- Operation Environment : 0°C~40°C, relative humidity <80%
- Storage Environment : -10°C~50°C, relative humidity <85%
- Input voltage: DC 12-24V
- Main Usage:
As an adapter for DIY cleaning the fuel injector nozzle, removed the injector from the engine, it can be cleaned separately.When the injector is clogged, you can use it to save expensive nozzles;
- Compatibility:
It has two sets of adapters of different sizes, it can be used for almost all brands of cars and motorcycle fuel injectors;
- Working principle:
The electrical port of the Injector connect the 12V power by this cable. When the current is switched on, the solenoid valve in the nozzle is opened. Meanwhile cleaning liquid flush through white tube by liquid pressure in CARB cleaner bottles, then through injector to clean it;
- Working requirements:
It needs the combination of 12V DC power supply and aerosol of Injector or carburetor cleaner ( not included ). Please prepare these necessary tools;
Set Includes:
- 1 x Injector Tester
- 1 x English Manual
- 1 x Carrying pouch
- Standard Packaging Box
- 2 x fuel cleaning injector nozzle adapter.
Persistent Visions
Reviewed in the United States on March 18, 2025
For what it is and its pricing this item is great! Used to bench test fuel flow at the fuel rail on a couple of 1980's BMWs. The only minor annoyance is needing to disrupt power in order to switch between the pulse level.
Customer
Reviewed in Canada on January 31, 2025
This cleaner works incredibly well would definitely recommend
D
Reviewed in the United States on April 13, 2025
I love this unit!
vk
Reviewed in the United States on February 10, 2024
This allowed my to clean my injectors before reinstall. Pulses and constant flows your injectors just don’t run them dry. The included adapter to get carb cleaner feed into the injectors is cumbersome at best. Great concept but doesn’t execute easily. Pulse machine works great
Andre
Reviewed in Canada on December 15, 2024
product works as intened, good qualiy.
Shopper
Reviewed in Canada on October 28, 2024
Works good. No complaints
MoParMan450
Reviewed in the United States on October 21, 2024
Good stuff
Blaine bryant
Reviewed in the United States on January 17, 2024
Worked great. I was able to find out I had a bad injector that wouldn't fire during the cleaning process with this tool.
Customer
Reviewed in Canada on April 16, 2024
It takes some fiddling to use, you almost need three hands. Once you get in to the right method, this gadget works awesome.Make sure to purge through the inlet (the end that is in the fuel rail) to get any gunk out first then turn the injector around to purge through the normal feed direction.Went from 19l per100km back to factory normal of 12-13l per 100km. About 3 hrs to do the job at home.
Cindy Graveline
Reviewed in Canada on September 19, 2023
Takes a little bit of use to. Few trials to find the proper way to hold onto the injector and kit as you're trying to also hold the can.Take the little sprayer thing off the can. Exposing the little tip part underneath.The white plastic piece provided into the kit sits ontop of that.The connections provided to connect the injector. I changed. I put little mini aligator clips.First backwash the injector by cleaning it backwards to try and get the dirt out of the little filter basket inside the injector.Then swap it around and clean your injector in the same maner it sprays out your gasoline.When the cleaner comes out like a nice mist you have cleaned your injector. If it sprays drops or solid you have dirty injector or need to replace if you cant get to a mist eventually. But if you are doing this then you should know that already. Or maybe you are learning. Either way. No mist no go.I took the battery out of my car and used it to do this. I use the fastest setting. I turn the power on and then press everything down on the can. Remember its a bit tricky to hold.I dont cut the power off till i have lifted the pressure off the can to make sure i empty the injector of all the cleaner.I use carb cleaner for this. I dont recommend using anything else. The brand i used is kleen-flo. If there is a little cleaner left in there it wont hurt anything.Its worked very well for me. My corvette runs great. So it defenately didnt do any wrong.It was a cool purchase to experience and could save you a few hundreds on injectors.Just be patient. Take it slow to find your most comfortable way to hold everything together. You will want gloves and towels. It can get messy as your gloves get wet its harder to hold everything together.Once i found my way it was very easy and went very well.Little practice makes perfect.
S&K McCorry
Reviewed in the United States on July 28, 2023
Nice, fairly affordable, tool to test fire your injectors!
Antonio
Reviewed in the United States on December 16, 2022
Very nice.. buy it
Pete
Reviewed in the United States on July 8, 2021
I was excited to get this injector tester because I believed I had a bad injector on my boat. I pulled all my injectors and hooked them up one by one to this unit. No matter what setting I set none of my injectors would fire. I could manually hook them up to a car battery and get them to fire. Put a multimeter on the tester and it was barely putting out 2 volts of power….no wonder nothing worked. Ended up sending this back.
Recommended Products
$23.57
$ 11 .99 $11.99
$58.00
$ 25 .99 $25.99