Your cart is empty.
Your cart is empty.Product Description
Accusize TiALN Coated M42-8% Cobalt Roughing End Mills, Fine Tooth
- TiAlN coated
- Center cutting
- M42-8% Premium cobalt
- Flutes ground by a world-class ISO-9002 Factory
- CNC Qualified
- Fine Tooth
- Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots
- Used for aggressive machining
- Performance approaching solid carbide with tough H.S.S Tools
- Recommended for abrasive materials
- Excellent performance in hard materials that are difficult to cut
- Extremely hard, wear resistant
- The ideally afordable professional milling bits for peripheral milling, ramping milling, helical milling, slotting milling, plugging milling, side miling, etc.
Specifications
Benefits of M42 8% Cobalt
M-42: 8% Cobalt
Featured with better wear resistance, higher hot hardness than HSS. Cost-effective material ideal for machining cast iron, steel, and titanium alloys.
Benefits of TiAlN Coating
Titanium Aluminum Nitride
Comes with higher hardness and oxidation temperature vs TiNand TiCN, ideal for stainless steel, high alloy carbon steels, nickel-based high-temperature alloys, and titanium alloys. Use caution in nonferrous materials. During machining, the coolant is not mandatory. It increases the tool life by up to 100%.
Recommended Cutting Conditions for Roughing End Mills - Side Milling
The Recommended Cutting Conditions for Roughing End Mills above are for
- Low Carbon Steels(Tensile Strength: ≈480N/mm2): Copper Alloys, & Cast Iron(Soft)
- Medium Carbon Steels (Tensile Strength: 480-720N/mm2): Copper Alloys, & Cast Iron(Hard)
- High Carbon Steels (Tensile Strength: 720-950N/mm2): Alloys Steel, & Stainless Steels
- Special Alloy Steels: Untree-cutting Steels (30-40HRC)
- Aluminum, Aluminium Alloys & Plastic
1.The Indicated speeds and feeds are for side milling
-a depth=1.5xD
-a width of cut=0.5xD
2.Use a rigid and precise machine and holder.
3.Use suitable cutting fluids
Rosa
Reviewed in the United States on February 8, 2025
Great bit. Does exactly what I need it to do.
Eli Winterburn
Reviewed in the United States on November 7, 2024
Works pretty good for a low budget item
OverACliff
Reviewed in the United States on October 19, 2024
Roughing Mills are great when you need to remove a lot of material without wearing out your finishing Mills. Would recommend.
CS
Reviewed in the United States on August 27, 2023
This style cutter is a great design for side milling large amounts of material with very little spindle load.
garym
Reviewed in the United States on March 24, 2023
Used on grey cast iron and mild steel. Works well depth of cut 1/3 diameter @500-600rpm. Too much heat on plunge cuts due to low chip ejection rates. Not for aluminum.
bert
Reviewed in Canada on November 18, 2023
I've used this end mill for over a year and it works great even still
Achy
Reviewed in Canada on March 14, 2022
made the job go a lot better
Customer
Reviewed in Canada on April 19, 2022
The mill is v sharp, and it leaves a great finish...I only used for an hour, so not sure how long will it last, but seems solid.
Customer
Reviewed in the United States on April 15, 2022
Eats up 316 ss like crazy409 rpm 6.8 imp. .69 doc. .4 woc.All 50 parts same tool. But use good coolant. No ballsar weak stuff.Vp-700 8% the picture is after running the job. The material start weight was 1.63 lbs. The part weight after is .73 lbs. I bet it was all but 98% cut away with this tool. I used to use other brands as this is a repeat job. I was paying 3.5 times for PM plus endmills and they ran the exact same. !!!
Nick
Reviewed in Canada on September 22, 2021
Good value and quick material removal.
motormedicine
Reviewed in the United States on December 21, 2020
a lot of cutting power for not very much money
C Scott
Reviewed in the United States on January 30, 2020
For the price, this is a pretty amazing rougher. I’ve had great results with both aluminum and mild steel, and the smaller chip size is a plus. Planning to get a few more of these.
James Lacharity
Reviewed in Canada on May 11, 2019
This milling cutter is just as advertised. Very good product and reasonably priced. Shipping was excellent.
Recommended Products
$35.95
$ 18 .99 $18.99