Your cart is empty.
Your cart is empty.Product Description
Features
1. The factory default user code is 168 and master code is 12345678
2. The code can be set from 1 digit to 8 digits number
3. Wrong code input 3 times lockout 15 minutes
4. Low battery warning(the red light on after opening )
5. One 9V battery is required for power
How to change user code
1. Press red reset button and buzzer beep twice, the yellow light on
2. Enter 1-8 digits new user code and press “*” to confirm
3. Now the buzzer beep twice and yellow light off, it means user code is changed
successfully.
How to change master code
1. Input “00” and then Press red reset button and buzzer beep twice, the yellow light on
2. Enter 1-8 digits new master code and press “*” to confirm
3. Now the buzzer beep twice and yellow light off, it means master code changed
successfully.
How to open
1. Input 1-8 digits user code/ master code and press”#” to confirm
2. The buzzer will beep twice and green light on , it means opened successfully
3. Wrong codes input the buzzer will beep 4 times
4. If wrong codes input 3 times, the system will be penalty 15 minutes.
5. During penalty period , all buttons will be no response
Will Britton
Reviewed in the United States on March 6, 2025
If you have a Winchester safe and the keypad goes out on you this is the perfect replacement. My keypad had a short and the keypad itself and it wasn’t getting enough power for the code to work. This keypad comes with a new chip in case you need to change the code so that is very handy. What was even more handy as this keypad literally plugged in to the original Chip and I did not even have to change my code. I give this an absolute A+ if you’re replacing a keypad on a Winchester safe thank you so much for selling it. It was 100% worth to buy.
Customer
Reviewed in the United States on February 28, 2025
Fits perfect same as original , easy to program
William C.
Reviewed in the United States on December 6, 2024
This item fit my Winchester safe I bought at Tractor Supply. Setup was a little different than what was on it but it works. Eventually I'll have to buy another. These are known to fail on many safes.
nicholas avis
Reviewed in the United States on December 22, 2024
Have a Winchester TS26-45 safe the keypad stopped working on. It was giving 4 quick beeps. What I could find said that was a major error/failure and needed replaced. So I looked at many replacements. This had a good review so tried it. First, the keypads swap out with no need to change the mounting bracket (old one on top in picture to compare to new one installed). The cable feeds right through the hole the old one come out of with no issues to plug into the motherboard. The motherboard swaps out fine, screwholes line up perfectly (new installed old to left for comparison). One concern I had was the solenoid for the lock. The one it comes with (last picture) looks nothing like the one on the safe (3rd picture) but the plug is not a concern because you just use the old cable and it fits into the plug on the motherboard no issues. Reprogramming the combination is easy. Just use the red button on the cable, plug it into the plug on the left on the motherboard board and follow directions they send. Super easy. Will see how this one holds up. For the price cheaper than others I looked at that seemed more complicated. Hope this helps.
Jason Wolf
Reviewed in the United States on October 16, 2024
The keypad comes with horrible instructions, written in broken English. My keypad is defective and will not allow programming. Nothing happens when you enter the master code. I contacted customer support, and after about 10 emails back and forth it’s still not resolved, with no offer of a replacement. They tell me to send a video, I’m like, you want a video of nothing happening when I enter the code?? They said yes. So I sent that useless video. Then they said to try a new battery. So I put in another new battery. Same issue, now they’ve ghosted me. Horrible product and even worse customer service. Thank for Amazon returns are easy, this piece of junk is going back…
Nick
Reviewed in the United States on October 13, 2024
The keypad on my Winchester 26 gun safe went out so I tried this one as a replacement about a month ago. This kit comes with more than just the keypad, but that's all I needed to replace. It fit right up to the existing bracket perfectly. It works very well so far (fingers crossed) and my safe is 100% operational again. It wasn't difficult to install. Would definitely recommend this for a inexpensive fix if you're keypad goes out on your Winchester safe.
patrick
Reviewed in the United States on January 8, 2024
So my winchester safe digital keypad started beeping randomly like crazy, not with any set pattern. So I ordered one of these. They keypad, mount, and motherboard are all exactly the same as ones from the factory. The only thing that was different is the solenoid. THIS IS IMPORTANT! The factory solenoid on my safe has a manual override plunger on one end, that can be actuated via an override key that came with my safe. Without this key, i would not have been able to enter my safe and do this replacement. My solenoid still worked, and was compatible with the new hardware, so i opted to reuse the solenoid. Install and set up was really easy, follow the video instructions. Also, dont forget to set a new default pin, you dont want a thief putting 1-6 or whatever it is and entering your safe.
Tim C.
Reviewed in the United States on December 10, 2023
The final installation details really depend on how your safe was put together and the mechanics of how your locking system works. I worked my way through this install and it works great. I have a Winchester safe. The instructions on how to change the code work very well.
Recommended Products