Shopping Cart

Your cart is empty.

Your cart is empty.

WWZMDiB 5V 12V 24V Relay Module 1/2/4/6/8/16 Channel Various Model Options (1, 1 Channel, 5V)

Free shipping on orders over $29.99

$4.99

$ 1 .99 $1.99

In Stock

About this item

  • 5 V 12 V 24 V Relay Module: Can be used for controlling various appliances with low voltage, such as 5 V LED strip lights, 12 V car fans, 24 V water pumps, etc
  • Support Optocoupler Isolation
  • Support High and Low Level Trigger
  • Support 1/2/4/6/8/16 channels 5 V 12 V 24 V can Choose
  • Maximum load: AC 250 V/10 A, DC 30 V/10 A, trigger current 5m A



Product Description

商标
继电器主图

Technical Parameters

  • Normally Opened Compatible Load: 10A 250VAC / 15A 125VAC / 10A 30VDC
  • Trigger Current: 2 - 5mA
  • Trigger Voltage(LOW): 0 - 4V
  • Trigger Voltage(HIGH): 4.5 - 12V
  • Lnsulation Resistance: 100MΩ (500VDC)
  • Power Indicator (Green), Relay Status Indicator (Red)
  • Lnterface design humane, all interfaces can be connected directly via terminal wiring leads, very convenient

继电器1通主图

5V relay version

  • Quiescent current: 5mA
  • Maximum current: 190mA
  • Trigger current: 2-4mA
  • Low level trigger voltage: 0-1.5V
  • High level trigger voltage: 2.5-5V

继电器1通主图

12V relay version

  • Quiescent current: 5mA
  • Maximum current: 80mA
  • Trigger current: 2-4mA
  • Low level trigger voltage: 0-4V
  • High level trigger voltage: 4.5-12V

继电器1通主图

24V relay version

  • Quiescent current: 5mA
  • Maximum current: 50mA
  • Trigger current: 2-4mA
  • Low level trigger voltage: 0-8V
  • High level trigger voltage: 8.5-24V

Input Interface:

  • DC+ : Connect The Positive Pole Of The Power Supply
  • DC- : Connected The Negative Pole Of The Power Supply
  • IN: Signal trigger input (High or Low Level Signal, select via jumper)

Output Interface:

  • NO: The Relay Normally Open Interfaces,The Relay Is
  • COM: Common Interfaces of the Relay
  • NC: Normally Closed Interface of Relay and It is Shorted to COM Interface Before The Suction is Closed

High or low level trigger select:

  • COM is Shorted With Low, the Corresponding Relay is Triggered By Low Level and when COM is Shorted With High Terminal, It is Triggered by High Level
继电器尺寸图

  • Please Select The Relay Board You Need In The Variant

DJRob
Reviewed in the United States on April 9, 2024
Happy to report that DIO/TTL/logic level signals are sufficient to actuate the coil to flip the relay, My controller puts out 3.3v for a digital high and I have the relay module jumper set to the H trigger. Like I said, it works.The module does have a bright green LED that's always lit when power is applied to the input side. It also has a red LED that lights when the coil is energized. Definitely a clicky relay- but at least you know when it flips.
Zaac
Reviewed in the United States on April 4, 2024
The media could not be loaded.
Recommended Products

$38.76

$ 17 .99 $17.99

4.7
Select Option

$373.42

$ 99 .00 $99.00

4.9
Select Option

$11.41

$ 5 .99 $5.99

4.9
Select Option

$12.37

$ 6 .99 $6.99

4.8
Select Option