Your cart is empty.
Your cart is empty.Wilkinson WOT02 54mm (2-1/8 inch) Vintage Telecaster Bridge Brass 6-Saddles for Tele TL Style Electric Guitar, Chrome.
Joachim Müller
Reviewed in Germany on September 1, 2024
Mit der Bridge bekommt man eine flachere Seitenlänge hin, da die Reiter nur einen Durchmesser von 6mm haben
Ronald
Reviewed in the United States on August 7, 2024
This is a very poor design , even worse than the 3 large vintage saddles .The string on each saddle will be left too far of the center point of where the string should be.The photos show the strings on the left too far as opposed to straight in the middle.I gave this 1 star because they do not work on my classic vibe Tele as described .Had to order saddles right after this was installed on my new telecaster.Would not recommend
Dylan Thomas Porter
Reviewed in Canada on July 12, 2024
Only needed the brass pieces and hardware to replace the old ones on my Mexican Telecaster. They work perfect. Money well spent.
Rockabilly Reject
Reviewed in the United States on May 31, 2024
I've played Fender Telecaster guitars for 40 years. I have tried to use vavious 3 saddle bridges to keep the early Fender vibe. But the inability to it have the guitar decently in tune and intonated drove me crazy. I finally gave into buying a six saddle bridge. I was able to get each string intonated quickly and I no longer cringe at the tuning when I play above the 5th fret. I am going to upgrade all my Telecasters with this six saddle bridge.
George H.
Reviewed in the United States on November 2, 2024
It is a very well made telecaster bridge.
Joe
Reviewed in France on November 13, 2024
Parfait pour remplacer un bridge de télé Jetguitars en top loader. Taille standard.
カスタマー
Reviewed in Japan on October 5, 2024
DIYギターのパーツとして購入他の人も言ってるけどオクターブ調整ネジが穴の真上にあって裏通しできないしトップロードで張るにしても真っ直ぐ行かない。オクターブ調整も山があってないのか異常に硬い。結局代替え品購入する事にしました。
carly z
Reviewed in the United States on January 4, 2024
The springs over the saddle screws are too large. They cause the guitar strings to bend an arch as they come through the body and then have to cross over the saddle. You can see the low E string really bending and having trouble reaching the saddle groove. I don't think this was just a single product effect. I think that there is a problem with the overall design.
SCOTTY
Reviewed in the United States on January 1, 2024
Like the other review stated. Saddle screws are centered which leaves strings shifted low E side. Also one of the saddles wasn't tapped properly and was difficult to remove for the installation attempt. I have no usable parts out of this. Possibly use for paperweight.Not usable.
Danuel Piles
Reviewed in the United States on April 8, 2024
This product out of the box looks really good. Then you install it and discover that it does not work as intended. The strings will not line up with the saddles at all. Even while routing the screws through the guitar body or through the rear load. The black finish is really bad too, flakes right off with ease. The literally painted right over a chrome bridge. I have been using Wilkison parts for years, this is the first bad product I have ever received. The saddle screws are far to long for the bridge type. So, not only are you fighting poor alignment issues, now you are dealing with the screw touching the string in front of the saddles too.Just bad all the way around.
Mand0617
Reviewed in the United States on September 27, 2023
My husband is building a guitar, and the was perfect
Dan S
Reviewed in the United States on August 27, 2023
The string through body holes on the bottom of the bridge are centered. The bolt holes for the saddles are aligned right over them. This is wrong. The groove in the saddles for the strings are offset because the strings run alongside those bolts. So for the strings to be centered, the bolts and saddles should be offset about 3/32". But they aren't. They are perfectly centered, throwing the strings off towards the bass side 3/32". The pictures show this bridge (with saddle bolts removed) vs a G&L ASAT bridge, which is properly offset. On this bridge, the strong though body and top-load holes should line up, but instead Willinson lined up the bolts with the string through body holes. Sending this one back...Update: Added a third picture of this bridge with its replacement, the "Musiclily Pro 54mm Telecaster Bridge Vintage 6 Barrel Saddles for Tele Style Electric Guitar, Chrome". Again, the bolts on this Musiclilly bridge are offset, allowing the string holes to be centered, and you can see the Wilkinson bridge centered the bolt holes instead.Last picture shows one of the black bolts and brass saddles from this bridge in the Musiclilly bridge (there's a white piece of paper under the saddles to protect from scratching during shipping). I may keep this bridge just for the bolts and saddles, since I like this look. Also off to the side is a bolt with both kinds of saddles, showing they are interchangeable, although they seem shifted a bit, which is why the brass saddle in the bridge goes off to the right a bit. I think if all 6 were the same, they would fit OK. So for double the (admittedly very cheap) price I get exactly the bridge I want. So for that, I'm increasing to 3 stars since this bridge proved useful in a way.
stewart
Reviewed in the United Kingdom on December 2, 2023
Great, really pleased with it. Wilkinson, good stuff at a decent price. Would recommend.
Recommended Products
