Your cart is empty.
Your cart is empty.Remember when you had a smooth and powerful cut? The WEN 6. 5-Inch 56-Tooth Carbide-Tipped Professional Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth feature an ATAFR (Alternate Top Alternate Face with Raker) design, making cuts faster and smoother then alternative saw blades. Abrasion-resistant non-stick PTFE coating maximizes performance and lifespan. The 20 mm arbor allows for compatibility with the majority of 6. 5-inch track saws on the market, including the WEN CT1065 Plunge Cut Track Saw. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/17 of an inch wide (1. 5 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.
CW
Reviewed in the United States on January 9, 2025
This is a nice blade for a track saw. Seems to be doing the job well so far. I do like Wen products and hope to try others. Would buy this blade again!
John Pare
Reviewed in the United States on September 2, 2024
I cut through 3/4 and 1 inch hardwood and oak for 3 feet run and got a very smooth cut, for stair tread replacement job involving 12 steps and a landing. Totally worth the price if you are doing stairs yourself; home improvement guy wanted 100 dollars per hour but it would probably have cost upwards of 8000 dollars if I had it done. It paired well with the Wen track saw with 100 inch track.
Michael Roy Gross
Reviewed in the United States on June 17, 2024
While budget priced, this blade performs above its weight class. Impressive. Will it outlast a high dollar blade, probably not, but you can but multiples at the same price as the expensive blades. Does it cut as cleanly, yes as long as it is kept clean and sharp (just like every other well made blade).
Cliente de
Reviewed in Mexico on March 20, 2024
Excelente disco de calidad llegó nuevo de paquete bien empacado muy bien protegido y cumple con la calidad y descripción recomedado
Bigmitch in md
Reviewed in the United States on February 22, 2024
I was pleasantly surprised with the quality of cuts from this blade! Almost no splintering on long cuts, minimal splintering on cross cuts. Great blade for the price!
Coastal Quilter
Reviewed in the United States on January 12, 2024
Wen proves again that they can provide high quality at a bargain price, more than most anyone else in the DIY woodworking industry. As with their track saw and track, this blade contributes to the efficiency of the system. It is a thin kerf design at 1.5mm …about 0.07’ thinner than the 2.2mm industry standard. Theirtrack saw is not known for its’ abundance of power so this thin blade can really make a difference, cutting a narrower kerf and slicing through material with less effort and energy expended. There may be some trade-offs. There is not as much carbide out there on the rim and this blade may be doomed to a little shorter life span for the lack thereof. On the other hand, even if this is the case, the blades are reasonably priced so replacement may not be as big a deal.Also, they have a PTFE based, slippery feeling paint coating on both sides of the blade that should reduce heat buildup, and 56 teeth at what looks like a pretty aggressive hook angle. All these things should help it cut cooler and smoother and keep the strain down on the whole system, as well as produce less sawdust in the waste system.This blade also cuts nice and smooth, and I think I will be happy to have it around.
Manuel S.
Reviewed in Mexico on September 6, 2023
Llego antes de tiempo vamos a probarlo
Ali Taleb Tabrizi
Reviewed in Canada on June 26, 2023
I recommend. Works great and price is good. Ripping blade works like it should.
patrick kelly
Reviewed in the United States on December 2, 2023
What an incredible blade! I use a tracksaw A lot. I like using the makita blades because the thi kerf and blade design. The carbide is shaped different than every one else's but......This is basically an exact replica of the Makita 56t blade. It cuts corian nicely and hardly any tear out. This blade is almost half the cost. Soo good!
Axel_alejandro
Reviewed in Mexico on June 16, 2022
No es lo que esperaba, deja muy astillado, se uso con la sierra wen ct1065
Jordan
Reviewed in Canada on May 24, 2022
Cuts well. Used to cut melamine and it left clean cuts with no chipping. Excellent value for the cost of it. Only used a bit so can’t say much about durability for now. Will update as it gets more use.
J. Sobecki
Reviewed in the United States on April 6, 2022
I was in the market for a track saw but couldn't justify spending $500 for a high end saw. After reading some reviews and getting a recommendation from a FB group, I decided to buy a Wen track saw for around $100. The friend also recommended buying the better blade and he was spot on. This saw makes accurate and smooth cuts, just like the much more expensive brands. The adjustment dials, etc., are not as finely engineered as the others, but I'm happy with both of my purchases. The saw and the blade are excellent.
James H. Biggs
Reviewed in the United States on May 18, 2021
I purchased this to go on a Dewalt Battery powered saw. To my surprise the Dewalt has a 5/8" arbor. So the blade did not fit. Research shows I'm not the first to make this mistake. So a 5/8" to 20 mm Adapter is on order. when that gets here i may update my review.
Recommended Products
$39.99
$ 16 .99 $16.99