Your cart is empty.
Your cart is empty.
LCD Controller Board:
DVI VGA AUDIO LCD Board Work for LVDS Interface LCD Screen
Input Power Adapter: 12Vdc More than 2A.
Come In Standby Model When Not Input Signal
Standby Model
Video Input: DVI VGA
Audio Input:
Audio Output: Speaker Connector
OSD: Brightness Contrast Auto Language And So On
Language: English French German Spanish Italian And So On
Board Size: 139mm x 53mm x 17mm
Compatible Work With:
17inch 1280x960
DV170YGM-N10 /DV170YGZ-N10
Packing list:
1× VGA DVI LCD Controller Board
1× Inverter Board
1× LVDS Signal Cable
1× Keyboard With Cable
1× Screw And Nut For GND Connection
Customer
Reviewed in the United States on March 7, 2025
This LVDS adapter works perfectly on a 2024 AtGames Legends Ultimate sold at Sams Club. The LCD power jumper came pre-installed on the 5v setting and the 23.8" BOE backlight cable plugs directly into the inverter board. I used the 30 pin LVDS cable that was already connected to the AtGames monitor and a 12v 3.3 amp power supply I already had.
Jarrod Willison
Reviewed in the United States on March 5, 2025
great Worked
Bob C.
Reviewed in the United States on February 9, 2025
Started smoking immediately! You can see the burn spot on the board in the pic. Luckily the monitor still works. I reordered another board, hopefully I have better luck.
David Bison
Reviewed in the United States on October 20, 2024
Allowed me to replace a proprietary interface with a normal one.
Sebaster
Reviewed in Canada on November 21, 2023
Fonctionne a tout coup,Parfais pour conserver lecran d'une arcade 1up
NiteLine
Reviewed in the United States on April 28, 2023
I bought this to use the LVDS screen in the ALU with other HDMI output devices. This works great and very easy to install. It works right out of the box. You need plugin the secondary board (The LED board) since the panel is the LED type. Excellent option for those that want to upgrade their ALU MCU to something more powerful!
Derrick M.
Reviewed in the United States on December 10, 2022
I have several old 24" HP All in one desktop computers that are so slow they are basically unusable at this point.I despise e-waste so I ordered one of these adapters, ripped the guts out of one of the computers, found a way to bodge this adapter in, and presto!Now I have a perfectly good 24" FHD monitor, with sound.I wasn't able to get the touch screen function to work because the cable for my monitor absolutely would not fit the adapter, but that's no big deal.Instructions were non-existent, but it was pretty easy to figure out where everything goes just visually.
Isabelle
Reviewed in Canada on August 27, 2021
Borne Arcade1up pacman brisée, cette carte transforme l'écran en hdmi/vga.
Jonh
Reviewed in Canada on July 14, 2020
Parfait pour arcade 1up !
T Fam
Reviewed in the United States on February 7, 2020
If you're looking at this, you probably know what this is for.If you don't, I suspect the popularity in this item is in it being used to mod Arcade1Up's. Look up "ETA PRIME Arcade1Up" to see a guide on how to mod them. I followed it to a T, and it worked out.The only thing I'll mention:- I modded a Gen 1 Street Fighter arcade cabinet. It worked great.- If you have a different generation A1Up, GET A DIFFERENT LCD CONTROLLER!Other than that, you're golden!
Customer
Reviewed in Canada on September 30, 2019
Worked great for my Street Fighter Arcade 1up cabinet!
John S. Kjellman
Reviewed in the United States on July 10, 2019
I installed this in my Arcade1Up Asteroids cabinet and it worked great. This allowed my Raspberry Pi to drive the monitor so I could run Retropie and open up thousands of games.In my situation the inverter board was not needed, All I hooked up was the larger main board and the control panel strip (the one with the switches on it). Also be sure to mount the board to the wood part of the cabinet, the metal LCD panel housing can cause a short of the board is allowed to touch it.As a side note, before ordering this or any other HDMI adapter, be sure to read the model number off the back of your LCD panel and make sure it matches. All these boards look the same but are loaded with different firmware by the manufacturer for your LCD panels specifications. Mine was a M170ETN01.1.
Recommended Products
