Your cart is empty.
Your cart is empty.Product Description
VXK8101
3/8" OD Nylon Plastic Hose (10 FT) with 1/4" NPT and 1/8" NPT Compression Fittings
About Vixen Horns
Vixen Horns offers the most comprehensive line of air horns, sirens and pneumatic accessories. Our quality engineered components have become the industry standard for 12-volt and 24-volt automotive aftermarket applications worldwide. Our goal is to consistently deliver performance, reliability and value to our customers.
This 3/8" OD Black Nylon Tubing with a length of 10 feets, an inner diameter of 1/4" and a wall thickness of 1/16" has an operating pressure rating of 225PSI. It will flow water, methanol or air and can handle temperatures of -4F to 248F. Comes with 1/4" and 1/8" NPT Compression Fittings manufactured to the highest standards made of premium brass. Ideal for air horn systems and many other suspension applications.
- Length: 10 FT
- Working Pressure: 225 PSI
- Outer Diameter (OD): 3/8"
- Inner Diameter (ID): 1/4"
- Wall Thickness: 1/16"
- Material: Nylon 12
- 1/4" NPT and 1/8" NPT Compression Fittings Included
Highlights
3/8" Outer Diameter
Outer diameter of the hose is an important value to take in consideration if push to connect type of fitting is going to be use with the hose.
1/4" Inner Diameter
Inner diameter of the hose will determine the line's air flow and is also an important value to take in consideration if a barbed or compression type fitting is going to be use with the hose.
10 Feet Hose
Hose has a length of 10 feet, ideal for air horn systems, filling air springs (load-leveling) and many other applications.
Easy Installation
Hose installation is done by taking out the compression nut, pushing the hose into the inlet and tighten the nut back to the fitting.
- 1/4" NPT Compression Fitting
- 1/8" NPT Compression Fitting
Corey Sweener
Reviewed in the United States on July 26, 2020
Very durable and works as expected
chucksjc
Reviewed in the United States on July 11, 2020
Plastic tubing is good. Trying to get it on the fitting is bad. Have to heat the tubing. Not easy to do in tight spaces. Plus, the fitting is short. I'll go back to regular compression fittings with nylon ferrule and brass insert.
DIANA ARGUELLES
Reviewed in the United States on August 4, 2019
Good quality
jon
Reviewed in the United States on August 12, 2019
Easy to install and use
Josh
Reviewed in the United States on July 12, 2019
Resolved my problem of my previous hose that kept blowing up under pressure and heat make the hose soft.
Kerry Greenstreet
Reviewed in the United States on March 19, 2019
Item was as described. Found the hose is extremely stiff, Warmed it up quite a bit to make it more flexible for installation. Almost impossible to get on the fittings, again, heated hose and fittings and with a whole lot of wrestling got fittings on. I will say though they don't leak and most likely won't come off. I would buy again.
Andrew Clayton
Reviewed in the United States on October 4, 2019
Upgraded from the standard 1/4” line to the 3/8” line. Plenty of tubing to go from point “A” to “B”. The most difficult part of the process is pushing the tube over the brass connector! A little warmth from a heat gun helps this process.
T.C.B.
Reviewed in the United States on April 6, 2019
can't get the fittings on the hose even after heating the hose.
Recommended Products