Your cart is empty.
Your cart is empty.Product Description
Information
When tapping, appropriate lubricating oil is good for cutting or cooling, making the cutting easier and faster, improving the smoothness and dimensional accuracy, and helping to extend the service life.
The following lubricants are recommended: steel - cutting oil, machine oil; pig iron - dry oil; aluminum - kerosene; stainless steel - mixed kerosene; hard plastic - dry oil. Be sure to select the appropriate cutting oil for complex tapping process and apply anti-rust oil for maintenance after use.
Die Stock Handle Wrench
The die stock fits round dies. The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod.
Easy To Use
The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
Features
- Round die holder is featured with adjustable screws to fix the dies
- The die stock can securely hold round dies and is easy to operate.
- Provides good wear resistance for long service life.
Round Threading Dies
The round dies can process, correct or clean external threads. Conical locking hole, strong locking and not loose. Great for maintenance and repair work on pipes, boards and machinery.
Wide Applications
For rethreading existing threads in hard materials like metal, or making new threads in softer material such as plastic. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. NOT suitable for tile, concrete, walls, stone, etc.
Alloy Tool Steel Dies
- High hardness
- Wear resistance
- High hardening capacity
- Tempering resistance
Tips for Round Dies
The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
When tapping, add suitable lubricating oil to the cutting edge, and repeat the operation 3-4 times until the thread length is obtained. When using by hand, pay attention to even force and avoid blind force.
Jason Atha
Reviewed in the United States on August 5, 2024
Very sharp die, cuts threads very well.
Brian Sullinger
Reviewed in the United States on August 10, 2024
I needed to take several 5/8 inch threaded bolts and cut a 9/16 inch thread on the tip end back about 3/8". To my surprise, this actually worked very well. Saved me a lot vs. going to a machine shop, and I can use it in the future.
Chris Nagy
Reviewed in Canada on September 6, 2022
Perfect tool I need
Nicholas Russo
Reviewed in the United States on August 31, 2022
I used it that day. Another project finished. Thank you!
Everett Mitchell
Reviewed in the United States on May 28, 2022
Bought for a one time use and that is all it was good for. Dull and chipped after four threads cut.
John Garcia
Reviewed in the United States on October 14, 2022
Received as advertised and as scheduled, low quality but functional
pierre dontigny
Reviewed in Canada on August 9, 2021
convient a tout les 38mm
Recommended Products