Your cart is empty.
Your cart is empty.Product Description
Unicook Quality 7636 Grill Flavorizer Bars 5 Pack
Best Gas Grill Replacement Parts for Its Cost!
Some of you grill parts maybe rust and wear out after a certain amount of time. We know you would prefer to keep your favorite grill running rather than throw it out. It is time to replace your grill parts and save the cost of a new grill!
You will get your grill work like new with Unicook replacement parts at a fraction of the cost of OEM parts!
Extend the Life of Your Gas Grill
More Other Grill Accessories:
- Grill Cover
- Grill Heat Plate
- Grill Control Knob
- Grill Topper
- Grill Skewer Set
Unicook Durable Grill Heat Plates
Longer Lasting Than Others
We care what you care about! To extend the life of the grill heat plates, we choose high-quality materials.
Unicook grill heat plates are made of heavy duty corrosion resistant material. They can last longer than other heat shields in the market that are easy to rust and deteriorate.
Durable Heat Plates Meet Your Need
About Purchasing:
- Please measure the size of your original grill heat shield and compare with ours before ordering.
- More grill heat tents in different shapes and sizes for your selection.
- Please click into "Unicook Store" to get more details.
Unicook Thick Porcelain Steel Grill Heat Tents
Thicker is Better!
Coated with 16 GA thickness porcelain steel, Unicook grill burner covers are more thicker and durable than other flimsy grill heat plates.
Features of Unicook Grill Flavor Bars 5 pack
Easy to Install
The new grill replacement parts is easy to install, can be assembled in minutes, no tools need.
Distribute Heat
Unicook grill heat deflector can prevent direct exposure to flame and distribute heat from burner tubes to cooking grates evenly.
Protect Burners & Create Flavor
Unicook grill flavor bars can protect the burners from grease, food drippings and create flavor by converting them to smoke.
Care and Use
In order to extend the life of your heat plates, please periodically clean them with a degreaser and either a scouring pad, paper towels or a brush.
If they look rusty or there is deep pitting, replace with new ones.
XON
Reviewed in Spain on January 31, 2025
Es ideal para quienes buscan reemplazar sus placas desgastadas con una alternativa funcional y asequible. Este recambio de placas es una excelente opción para renovar tu barbacoa sin gastar demasiado. Mi barbacoa es una Weber Spirit II E-310 y después de 3 años ya tenía la placas para jubilar.✅ Lo mejor:✔️ Fácil instalación en solo unos minutos.✔️ Distribuyen bien el calor y protegen los quemadores, como los originales.❌ A mejorar:▪️ Son un poco más delgadas que las originales.
Francesco
Reviewed in Italy on January 19, 2025
Ottime per il mio Weber Spirit II, stesse dimensioni delle originali sono solo più basse di qualche millimetro, ma ovviamente sono completamente compatibili, il barbecue funziona alla perfezione, il calore trasmesso è lo stesso e identici tempi di cottura di prima.Come indicato chiaramente nell'inserzione si tratta di piastre in materiale diverso rispetto le originali in acciaio inox, in questo caso sono piastre in acciaio trattato con una vernice porcellanata, ora devo solo verificare la resistenza e la durata nel tempo.
Schulz Patrick
Reviewed in Germany on January 1, 2025
Die Unicook 7636 Grill Heizplatte, 5 Stück Brennerabdeckung für Weber Spirit I & II & GS4 300 Series Grills, Grillersatzteile 38.9cm Aromaschienen Zubehör für Weber Spirit E310 S310 E320 S320 E330 S330 kommen in einem Karton beim Käufer an.Enthalten sind hier 5 Brennerabdeckungen für Webergrills. Die Abdeckungen sind aus stabilem Metall gefertigt und sind absolut gut verarbeitet. Kein großer Unterschied zu den Originalteilen.Der Preis ist mit ca. 44€ angemessen. 5 Sterne.
customer
Reviewed in the United States on September 25, 2024
I got these to replace my aged "Flavorizer Bars" on my Webber Spirit II (E-310) since those bars wear out and start rusting, getting holes, etc. over time and heavy use. I found these new ones to both fit & work perfectly, replacing them is SUPER EASY! It literally only takes about 2 minutes.1) Just lift off your grill grates2)Lift out the old Flavorizer bars3) put the new ones in the same slotsNow, there are only 3 burners on the Spirit II, but 5 flavorizer bars. You actually need to use ALL 5 bars, since they cover and protect the gas tube that runs across the back that helps ignite the middle and right side from getting gunked up with grease, sauces and such.
Megan G
Reviewed in the United States on September 21, 2024
The bars are heavy and fit perfectly on my Weber spirit 330. They cost much less than I expected to replace them. All you have to do to install them in your grill is lift up the old ones and put in the new ones. Super easy to replace them. My original ones had holes burnt through the metal so I was probably overdue to replace them. I've used my grill since I put the new ones in, and I didn't notice any functional difference from the original bars that came with the grill.
Casper & Boo
Reviewed in the United States on September 11, 2024
perfect fit for my weber spirit 310. i hated the ones we got last with the notches on them, they would send flames up when meats where greasier and often charcoal them too much in some areas. These non-slotted ones take a little longer to grill meats but, they do so evenly which makes them perfect for meats like chicken..I did turn grill on high without grilling to get any manufacturing chemicals/smell off of these which did result in an initial smell which quickly went away..
Mel
Reviewed in the United States on August 5, 2024
Boy do these have some weight to them. I grill a lot. I like to keep some spare parts around. I had a kit that included falvorizers and burners on standby. I recently replaced my flavorizer bars and wanted to get another set to have on hand. Having just replaced the originals with another 3rd party's falvorizers, I can say that thee are heaviest of the three. They fits perfectly in the 310. The only thing I can't figure out is that all of the after market ones don't seem to have the notches that the originals do. They all seem that way, and I've used several without any noticeable difference.Very nice. Good value buy.
K. Thurber
Reviewed in the United States on August 29, 2024
Fits great. Great price
Nelly
Reviewed in the United States on August 25, 2024
Fits in my Weber Spirit E-310. Looks like the original bars, but without the cutouts and holes. I don't think they degrade performance, but it does make it a little bit harder to see the flame. They seem like the same thickness as the original bars. Hopefully they last as long as the original and are easy to clean.
J-10 Suited
Reviewed in the United States on July 31, 2024
perfect replacement for my 5 year old flavorizer bars on my weber spirit 2 e310the fit was exactly the same as the original weber ones that came with the grill, these were actually heavier in weight than the old ones, only time will tell how they hold up but as of now i am very happy with them and if they last 5 years like the original i would purchase againupdate : end of my first grilling season since i replaced my original weber bars with these and after cleaning them they are doing great, no pitting or rusting on them at this point
MichiNbg
Reviewed in Germany on December 11, 2024
Ich denke, jeder Spirit-Besitzer kennt das Problem: Nach schon nicht allzu langer Zeit strecken die Aroma-Bars die Flügel - das ist schlicht der Hitze, der die Teile ausgesetzt sind, geschuldet. Nach meiner Erfahrung sind die Aroma Bars schlicht Verschleißteile, die sporadisch ersetzt werden müssen.Die Brennerabdeckungen von UniCook tun diesen Job ganz hervorragend, sie mögen ein wenig leichter sein, als das vielfach teurere Original, aber das spielt in der Praxis eigentlich keine Rolle - der Brenner wird vor hinein tropfendem Fett gut geschützt, dennoch bildet sich eine schöne Flamme, wenn etwas auf die Bars tropft. Insofern ist der Nutzen dem Original absolut ebenbürtig - auch passen die Bars, wie sie sollen. Bitte die Modellnummern beachten, für die ganz alten 100er und 200er passen diese Bars auch, sie liegen aber etwas schmaler in der Aufnahme als das Original (ca. 12 mm). Dadurch, dass die Länge stimmt, spielt das aber eine untergeordnete Rolle.Daher gibt es von mir eine ganz klare Empfehlung.
Adam
Reviewed in the United States on October 20, 2024
Fit great.... and helped make my grill almost like new again. Time will tell on how long they will last.
Recommended Products