Your cart is empty.
Your cart is empty.Product Description
- Tension Strength: 520 lbf
- Windproof: 9/11/13 PCS adjustable wind straps that can withstand up to 160 pounds of tension, keep the boat cover firm in place and prevent the cover from being blown off when trailering and mooring.
- Waterproof: Our boat cover has passed 8000 Pa water pressure resistance test.
- Anti-UV: Anti-UV Coating Surface protects the fabric from wind-blowing and sun-baking disintegration and discoloration.
- Fade Resistant: Solution-dyded fabric is colored before woven, so the dye and yarn can be better integrated and the fabric will have better color fastness, avoiding fading!
Made of thickened 3 layers 900D Solution Dyed Polyester (Anti UV coating surface + 900D Solution Dyed Oxford + Waterproof PU Backing), our boat cover won't get torn easily!
- Our strap loops are 2-inch wide (others just 1 inch), much stronger.
- Adjustable straps with premium ABS buckles can withstand up to 160 lbf of pull.
- 2 air vents with PE Supported panels balance the air pressure inside and outside the boat cover, minimizing wind strength and making boat dry fast.
- 2-inch-wide tie-down loops are better to achieve mooring function.
- The elastic hem hepls keep the boat cover firm in place and prevent the cover from being blown off when trailering and mooring.
- "Front" is labeled on the cover, easier for installation.
- We especially added Extra Layers of Reinforced Protection at critical points (Bow and Both Corners of Stern) to reduce the risk of tearing at those areas and extend its service life.
- Double-stitched seams for the higher capability of anti-scratch and anti-tear!
- Double cloths and 2" wide webbing loop with 4 stitched bartack, much stronger for trailering and mooring.
Adjustable straps with high-quality ABS buckles keep the boat cover firm in place and prevent the cover from being blown off when trailering and mooring.
Nukugula boat cover is made of 3 layers thickened 8.5 oz 900D SOLUTION-DYED polyester, which passed 520 LBf tensile strength test, far superior to others' 420D/600D oxford (maximum tension: 300-450 lbs).
Kyle Pannell
Reviewed in the United States on March 31, 2025
So far, so good. I put this on my boat and a few hours later we had a severe storm. When the storm was over, I went and removed the entire cover to check for leaks. Not one leak anywhere. I would advise getting a cover a little bigger than you need. I did that and Iβm able to pull the cover further down on the front, back and sides before tying it off.
cp
Reviewed in the United States on February 26, 2025
Great heavy duty canvas cover
jaimelynne
Reviewed in the United States on January 30, 2025
Perfect size for my 23ft daycruiser and great price and quality
Ralph
Reviewed in Canada on September 25, 2024
fits good, easy install.
ULXD
Reviewed in the United States on September 23, 2024
Best quality boat cover I've owned. We live in Tampa Bay FL area and get tons of rain all summer. I've had a few covers over the years for different boats. This one has the best quality material and stitching I've had. I don't often write amazon reviews but I wanted to write this one for other boat owners, 100% recommend this one. The outboard cover is great too, same quality.
Gregory Torres
Reviewed in the United States on July 7, 2024
Fabric is def not 900d. More like 600d. Very thin. And stitching is coming apart in a few places. Sorry but i dont recommend this one
Matt
Reviewed in Canada on July 29, 2024
Item is very durable. Item was a little big for my boat and that doesnβt matter cause youβre strapping it off the frame. Straps are also made from a good material and fastened to the trap very well. Tarp holds the water out and it doesnβt flap in the wind. Would recommend for anyone needing a good heavy duty tarp.
TimWells
Reviewed in the United States on June 8, 2024
Seems well made , looks good , I bought the size bigger beam width because my boat was only 2 inches short of next size down but appoi could have gone with that size but fits good with larger width just comes further down on sides. Cover looks good and well made really like the tie downs, did a short tow no problems time will tell but all good for now
Kathy wald
Reviewed in Canada on June 15, 2024
Very short on the sides and very poor quality fabric
Paul
Reviewed in the United States on March 31, 2024
I've got a 20' dual console bass boat. Bought the 20-22' cover and it was easy to big. Bought the 17-19' and it's a snug fit.The cover seems to be well constructed. The only criticism is that it needs a strap for the back side corners. Every other place is well secured.The bag/boat cover surprisingly covers my 200hp outboard very well.Let's see how it holds up during the next rainstorm! Overall, I'm happy with the cover.
Shane
Reviewed in Canada on December 15, 2024
I really like the individual straps per side rather than the style that has to go under the boat. Heavy material, seems very good after this summers use.
Harold Conrod
Reviewed in Canada on October 31, 2024
Cover seems ok, tie down straps are garbage, slight wind and the snaps release
Coveland
Reviewed in the United States on October 1, 2024
Very nice for the price. I paid about $50 for it. Useless instructions, and under boat straps c ould be better. But the cover itself is very nice. It is replacing a cover I paid over $100 for, and it is just as good. Good sewing, good fabric. I took pic after just installing 1 under boat strap. It will fit well when all installed
Recommended Products