Your cart is empty.
Your cart is empty.Product Description
TOMAX Wood Cutting Saw Blade
FEATURES:
- Ideal for cutting applications in softwood, hardwood, chip board or plywood etc.
- Hardened steel body to ensure longer cutting life and sharper cutting edge.
- Laser-cut anti-vibration Technology reduces noise and extends cutting life.
- Faster, smoother and more reliable cutting feeling.
- Clean, neat cutting surface with virtually no heat, burrs and sparks.
TECHNICAL SPECIFICATIONS:
- DIAMETER: 7-1/4 INCH
- TEETH: 60 TEETH
- ARBOR: 5/8 INCH DMK
- KERF: 2.2MM
- APPLICATION: All Types of Wood
Faster, smoother and more reliable cutting feeling.
Ideal for cutting applications in softwood, hardwood, chip board or plywood etc.
Laser-cut anti-vibration Technology reduces noise and extends cutting life.
Clean, neat cutting surface with virtually no heat, burrs and sparks.
Al
Reviewed in the United States on February 23, 2025
Watch out for the size of the Arbor hole in the center. Make sure they fit your saw
Lynn Stewart
Reviewed in the United States on February 23, 2025
24t is better for thick lumber vs thin panels or plywood but still will work fine.The blade is thicker that the blade that came with my saw. Easy to install. Make sure you are reading the instructions for your tools for correct installation.
E. Pena
Reviewed in the United States on January 19, 2025
We used this to make shelves for our basement the cuts were clean and square, very happy with the results. Would definitely buy again.
Michael J. D'Eath
Reviewed in the United States on January 17, 2025
I use these on the foot of my old Echo 2-stroke weed whacker. It cuts all woody scrub and underbrush that animals won’t clear, such as Texas ice plant/tobacco. It’s hit a few rocks and still cuts acres of stuff.
T&Z
Reviewed in the United States on September 5, 2024
This blade cuts so smooth and I have done cuts so thin that you can see through the wood. I have used this quite a bit and it still seems sharp. Good buy and would buy again.
Gary the Great
Reviewed in the United States on September 23, 2024
I needed to rip 600 feet of hard rock maple so I purchased this as a throwaway blade knowing that it would be dead before I finished this BUT the blade was STILL sharp and in good condition. I have never purchased a low price saw blade that was this good. When need arrases I would purchase again.
Jackie Daytona
Reviewed in Australia on February 23, 2024
Clean cuts as you would expect of a new blade. Operates smoothly in my mitre saw. Used for crosscut on pine, hardwood (35x70) and old pallet wood. Good job on all didn't struggle on the hardwood.Price is decent, this is a cheaper blade not a premium blade but it does what it needs to and is good for the money. Manufactured in China. I bought it so old pallet woods and rough fencing don't go through my good Irwin and DeWalt blades.
d_a_salisbury
Reviewed in the United States on April 21, 2024
This is after 2 weeks of cutting. So far all cuts have been made on pre finished baseboard and shoe mold. The front and back of my wood comes out beautifully. In the 2 weeks I've cut well over 3,000 Lf of 5 1/4 inch base and same amount of shoe mold. The main issue I've always had with other non diablo blades are whatever side of my wood is facing the back of my saw comes out ragged and torn up. This blade does not do that at all. Wood looks great no matter how I cut. Even with 5 1/4in. wide baseboard, laid flat on the saw it comes out perfect. Even after 10 solid work days cutting all day. Home Depot charges $75 or more for a comparable blade (Diablo) and this blade is a little less the half that price. I've tried several 12" saw blades now and other then Diablo they either degrade much quicker or the cuts are a lot uglier. My only complaints, which are very minimal.... the blade is a little heavier than I'm used to and it's not balanced perfectly, I think. Has the slightest wobble to it I feel like. Neither issue affects the quality of the cut though. It's truly crisp. I really wasn't expecting this blade to perform any better then the many other "off brand" blades I've tried but I really couldn't be happier about this one. The DeWalt This blade has out performed all others so far except Diablo. I will update my review when this blade starts degrading enough to need replacing.It's still cutting pretty well a couple months into it now.... I did just buy another one so I'm ready to replace the original when it's needed. I'm needing to slow my cuts down to keep a nice looking cut. But I'm tens of thousands of feet of 5 1/4 in. Baseboard and equal amount on f shoe. It's outlasted every saw blade I've tried other then Diablo it's unmatched. And it 1/3 of the $ of a diablo blade. Tomax 12in 100 tooth saw blade is hands down the best blade for the $ you spent. Oral for Mr.Tomax everyday!!!!!!
E Adgate
Reviewed in the United States on February 6, 2019
I put this blade on my DeWalt miter saw that I use for trim ( baseboard, quarter round, thresholds, etc. ), and have found that it held up as well if not better than the DeWalt and Avanti blades I normally use.In terms of overall durability I'm very impressed. For a blade to last me 3 months is very good.The blade is steady and I see no wobble. The cut is smooth and feels comparable to the Diablo blades I've used.I didn't test it on harder, thicker wood, so there's a chance it doesn't perform as well there, but for trim it's great.I came back to buy another one for my table saw but they're unavailable now for some reason, which is the only reason for the 4 stars instead of 5. Availability is an issue for me, and I'll be trying another brand because of it. Well, I guess that means another review!
Recommended Products
$27.99
$ 13 .99 $13.99
$57.43
$ 27 .99 $27.99