Your cart is empty.
Your cart is empty.The Tekonsha Trailer Brake Controller Custom Brake Wiring Harness exists to make connecting your brake controller to your vehicle as easy as possible. These custom two-plug units are specifically designed to be used with any Tekonsha brake controller. The Plug & Play feature on the Tekonsha wireless brake controller for trailer wiring harnesses makes them easy to install. Simply plug one end of the harness into the back of your desired Tekonsha brake controller and the other end into the port in your vehicle. No cutting, splicing, or taping required for this brake controller wiring kit. Each wiring harness is made up of four copper wires wrapped with a braided nylon thread to insulate the wires and protect them against nicks, punctures, and elevated temperatures. The four-pin Plug & Play connectors on each end of the harness are uniquely designed, with one end to fit each vehicle based on make and model year specifications, while the other end plugs easily into any Tekonsha brake controller. Tekonsha trailer brake controller harnesses are custom designed, giving you plenty of wire to reach between where it is connected to the vehicle and where it connects to the brake controller without stretching or straining the wires. And because Tekonsha is the leader in wiring and electrical, you can relax knowing your connections will be safe and secure, so you can hit the road with confidence! With Tekonsha, Life’s a Journey. Stop Often.
OnTheRoad
Reviewed in Canada on January 23, 2025
I bought it to cut off the Honda connector and use as a pigtail connector. Great for that; fairly long wires.
Ed W.
Reviewed in the United States on August 3, 2024
This is plug and play. It allowed me to place our trailer brake controller where we need it.
David Yuricic
Reviewed in the United States on August 25, 2024
Got it for a honda pilot and the part fit perfectly
Renan
Reviewed in Canada on August 16, 2024
I have installed this cable on my 2021 Honda Pilot and aside the hustle to find where the OEM connector is located (behind the dash on top of the parking brake, you have to remove the side cover and the lower portion below the steering column to access the connector easily) The price worth as the pigtail for the brake controller would cost around 20 bucks and aside that you will have to solder wires and what not, and this harness is plug and play and well build.
Keith M Reed
Reviewed in Canada on July 19, 2024
Fit my 2009 Pilot perfectly. Excellent product.
SkyHawk
Reviewed in Canada on May 9, 2024
Easy install. Works good
K t
Reviewed in the United States on May 31, 2024
What can I say. Fit and works
Henry
Reviewed in the United States on March 13, 2024
Plugin solution for connecting my brake controller. Just right length to reach front of center console below the radio without any modifications. GREAT buy.
Mark Mc Kenna
Reviewed in Canada on September 18, 2023
Plug & play harness, perfect fit . It's not easy to see the connector under the dash of the PASSPORT (like they show in the Teconsha installation video). I had to remove the lower dash cover(under the steering) , the connector was on the left side of the steering.
BREN
Reviewed in the United States on August 3, 2023
Easy to install, works great to save my truck's breaks when traveling with my camper.
Cody Taylor
Reviewed in the United States on May 12, 2022
Did make the install of my brake controller very straight forward. The adapter harness is plenty long. Both plugs worked as expected.That said, if I had to do it again, I would use the factory harness instead. The factory harness is the correct gauge of wire. Plus, it is easier to cut holes for wires than it is for a plug. The pain of crimping or soldering is probably worth it.
Dan
Reviewed in the United States on June 1, 2020
Installed on a 2014 Honda Pilot which had the hitch and trailer socket wiring already installed at the factory. This was long enough I was able to install the controller in the little cubby in the dash to the right of the gear selector. I just used a dremell with a 90 degree head on it and a cone shaped grinding wheel to make a hole in the top back of the cubby hole big enough for the connector to go through. I was able to mount the controller by screwing through the top of the cubby hole with short screws. Made a fine finish and easy project. I took the trim off that goes behind the gear selector to make the install easier, but it could probably be done without removing it. I paired it with the Tekonsha 90160 Primus IQ Electronic Brake Control.
breeman
Reviewed in the United States on August 13, 2019
Installed the Tekonsha brake controller without issue in my 2018 Honda Ridgeline using this wiring harness. Was long enough to reach the center console (just) from the Honda OEM connector located under the dash. I located mine in front of the console gear selector at the bottom of the central dash console. Note the OEM connector is located above where your left foot would rest when driving not above the brake pedal as indicated in the instructions.
Recommended Products
