Your cart is empty.
Your cart is empty.Product Description
- Adjust the Air Pressure, Filter the Moisture and Particles in the Air, and Lubricate the Air.
Product Description
Triple Aluminum Alloy air Filter with Manual Drain Valve
- Thread Size: The Air Drying System has Two 3/8" NPT Ports and One Gauge Port 1/8" NPT
- Material:Aluminum Alloy Body, Strength to Engage in Corrosion Resistance
- Pressure Range:0-150 PSI
- Operating Temperature Range: 40-140F(5-60℃)
Product Feature
recision Pressure Gauge
The Pressure Gauge with Purple Copper Core is More Accurate to the Pressure Induction, and the Metal Shell is Resistant to Impact and Corrosion.
Filter Cup
- Transparent Filter Cup Allows You to See the Volume of Water and Oil in the Glass.
- The Capacity of the Cup Must Not Exceed 80%.
Installation Direction
- Pay Attention to the Airflow Direction,And Follow the Arrow on the Pressure Regulator.
Complimentary Accessories
- 1 × Nickel-plated Iron Air Plug and Iron Air Coupler、2 × Male Pipe、1 × Filter Elements、1× Copper Nickel Plated Ball Valve、1× Teflon Tape.
Steps for Replacing Filter Element
Step 1
- Rotate to the Left to Remove the Protective Case and Filter Cup.
Step 2
- Rotate to the Left to Remove the 5 Micron Cartridge for Replacement.
Step 3
- Replace it with the New Filter Element.
Step 4
- Install the Protective Case and Filter Cup Back into Place.
S
Reviewed in the United States on September 30, 2024
I ordered the "TAILONZ PNEUMATIC 0-150PSI 1/4 Inch NPT Aluminum Alloy Air Filter, Regulating + Filtering + Lubrication, Particulate Filter, Coalescing Filter, Desiccant Dryer and Air Regulator (Manual Drainage)"The product name is inaccurate, but the product description has the correct information of what the product is. The item is only an air particulate filter, regulator, and lubricator, it does not have a coalescing filter or desiccant dryer. The only documentation about the item is in the product description section of the products listing, however it does contain enough information to use and maintain it.As an air filter, regulator, and lubricator it functions properly and mists oil into the air lines to keep your pneumatic tools lubricated.The pressure gauge was only loosely fitting before there were interference issues with the air filter housing and the pressure gauge. To remedy that I used what would otherwise be an excessive amount of the included teflon tape to wrap it so it would tighten up much sooner, a pneumatic threadlocker glue/sealant might be better.The other fittings were installed without issue. The quick connect was initially leaky but it had some hidden threads that just needed to be tightened back up.Opening the air filter and lubricator housings was straight forward, although they were screwed on super tight.The air filter was easy to change, but was also on super tight, the preinstalled one had some slight damage to it.Both the air pressure, and the oil lubrication are easy to adjust, with clear markings for adjustments.
Trekhead
Reviewed in the United States on October 8, 2024
A little more plastic than I would like, but good for the price. I am using this one in my garage on my small compressor and wanted more control over my air than from just the compressor. This gives me a nice mounting point to get to my air for my small projects whenever I need it. Just set it up, so not sure about the separation, but the pressure adjustment seems adequate.
Bluesman
Reviewed in the United States on October 6, 2024
I've installed this TAILONZ PNEUMATIC Air Filter assembly. It is so nice to have dry, filtered air and a sure way to regulate hose pressure. I do a lot of paint and powder coating. Especially when spraying powder, the regulator has improved how the material atomizes and dispenses over the Item that is being coated. Whether you're a DIY enthusiast or need something robust for more serious tasks, this is a must-have.The combination of regulating, filtering, and lubrication in one unit makes it super convenient. The manual drainage feature is handy. I live in the wet Pacific Northwest so I drain it about ever 2-3 days. It allows me to easily maintain the system without much hassle. T he particulate filter and coalescing filter work together to keep the air clean and dry, which is crucial for the longevity of my tools and quality of the coatings I use.The build quality is excellent. The aluminum body is solid and durable. I'm sure it will last a very long time. I am not impressed with the red coating applied by the factory. It's a bit thin and has a lot of inclusions in it. Eventually, I plan to strip the factory coating and apply new powder coat. Its a little thing and doesn't effect performance at all. Just something I thought I'd mention in full disclosure. Again, no big deal. I sort of tweak of these things and can get more picky that I should. But it's a really well built air regulating/filtering assembly and I'm confident it will last a very long time. It was easy to install. I mounted to my compressor frame, and it integrated seamlessly into my existing system.Overall, I'm thrilled with this setup. It's a top-quality piece of equipment that's improved my work. If you're in the market for a comprehensive air filter system, I highly recommend this one. You won't be disappointed!
Fred Bloggs
Reviewed in the United States on October 4, 2024
Review of TAILONZ PNEUMATIC 0-150PSI Air Filter RegulatorOverviewThe TAILONZ PNEUMATIC air filter regulator is a comprehensive solution designed for air filtration, regulation, and lubrication in pneumatic systems. With a pressure range of 0-150 PSI and a durable aluminum alloy construction, this unit combines a particulate filter, coalescing filter, desiccant dryer, and air regulator into one compact device.Build QualityConstructed from high-quality aluminum alloy, the TAILONZ air filter regulator feels robust and well-made. The materials used are resistant to corrosion and wear, ensuring longevity even in demanding environments. The overall design is functional, with a clear layout that allows for easy access to adjustments and maintenance.FunctionalityThis unit excels in providing multiple functions in one package:Filtering: The particulate and coalescing filters effectively remove moisture and contaminants from the air, ensuring that your pneumatic tools operate smoothly and last longer.Regulation: The adjustable pressure regulator allows users to set the desired PSI, providing versatility for different applications. The gauge is easy to read and provides accurate pressure readings.Lubrication: Incorporating lubrication features helps in maintaining pneumatic tools, reducing wear and tear over time.Desiccant Dryer: The addition of a desiccant dryer aids in moisture removal, further enhancing the quality of the air supplied to your tools.InstallationInstallation is straightforward, thanks to the 1/2 inch NPT connection. Users appreciate the clear instructions provided, making it easy to integrate into existing systems. The manual drainage feature is also handy, allowing for easy maintenance and ensuring that water can be removed as needed.PerformanceUsers report that the TAILONZ air filter regulator performs exceptionally well, maintaining stable pressure and effectively filtering air. The dual filtration system is particularly noted for its effectiveness in improving air quality, leading to better tool performance and longevity.ValueGiven its multifunctionality and solid performance, the TAILONZ PNEUMATIC air filter regulator offers great value for both home and professional users. The price point is competitive for the features provided, making it a worthwhile investment for those looking to enhance their pneumatic systems.ConclusionOverall, the TAILONZ PNEUMATIC 0-150PSI air filter regulator is a reliable and efficient choice for anyone needing comprehensive air filtration and regulation. With its robust build, effective performance, and ease of installation, this product is highly recommended for both DIY enthusiasts and professionals. If you're looking to ensure clean, regulated air for your pneumatic tools, this unit is an excellent option.
Recommended Products