Shopping Cart

Your cart is empty.

Your cart is empty.

Supplying Demand DA97-07365G DA97-07365A Refrigerator Ice Maker Assembly Replacement Model Specific Not Universal

Free shipping on orders over $29.99

$109.99

$ 45 .99 $45.99

In Stock

About this item

  • Please see Model Number fitment information at the bottom of this page before placing your order for this part. Alternate part numbers include AP5651749, 2754555, DA97-07362A, and PS5575307.
  • 115V | 145W | 60Hz | (9) Cube ice mold | (12) Pin connector | Fits model specific French door refrigerators
  • It is important to disconnect your appliance from the power and water supply before servicing. If your new ice maker is not making ice the freezer temperature may be too high, your water filter may be clogged, your thermostat may be defective, or you may have inadequate water pressure.
  • Supplying Demand replacement parts are compatible with Major Brands, but you should always verify fitment with your specific model. We have included a video in the product gallery to help you find your model number and information in the description below.
  • SD products come in Supplying Demand packaging.



Product Description

SD logo with Ice - Ice Makers

Ice Makers and their harnesses are crucial components in your refrigerator. They come in many different shapes and sizes, and have different specifications depending on the Model they are being installed on!

Know Your Model Number

Watch the video below for more detailed help in locating your model information!

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

A lot of Ice Makers and Harnesses will look the same, but they are both 100% Model Specific and have many different specs - even within the same brand, knowing your exact Model and Serial Numbers is very important!

Inspecting and Testing Faulty Ice Makers

Inspecting Faulty Ice Makers

Inspecting Faulty Ice Makers

Signs of a faulty Refrigerator Ice Maker can include:

  • No Ice Production | Small/Misshapen Ice Cubes | Frequent Ice Jamming | Leaks or Water Dispensing Issues | Noisy Operation | Ice Smells/Tastes Strange | Error Codes/Indicator Lights | Inconsistent Ice Production | Freezing Water in the Ice Maker
Testing Faulty Ice Makers

Testing Faulty Ice Makers

You can test your Refrigerator Ice Maker by:

  • Visual Inspection and Power Check | Water Supply Check | Ice Maker Functions | Thermostat and Heater | Ice Maker Module and Controls | Mechanical Components | Consult the Manual

Testing your Ice Maker explained:

1. Visual Inspection and Power Check - Visual Inspection: Start by visually inspecting the ice maker for any obvious signs of damage, leaks, or loose connections. | Power Check: Ensure the ice maker is properly plugged in and receiving power. Check the power cord and outlet for any issues. Use a multimeter to verify voltage at the ice maker’s electrical connections.

2. Water Supply Check - Water Supply: Confirm that the water supply line is connected and turned on. Disconnect the water line temporarily to check for water flow. | Water Inlet Valve: Test the water inlet valve using a multimeter to check for continuity. If the valve doesn’t have continuity, it may be defective and needs replacement.

3. Ice Maker Functions - Manual Test: Depending on the ice maker model, you may be able to manually initiate an ice-making cycle. Refer to the manufacturer's manual for specific instructions on how to do this. | Observe Operation: During the cycle, observe the ice maker to see if it fills with water, freezes ice cubes, and ejects them into the ice bin. Note any unusual sounds or movements that could indicate a problem.

4. Thermostat and Heater - Thermostat: Test the mold thermostat for continuity using a multimeter. Compare the readings with the manufacturer’s specifications. If the thermostat is faulty, it may not signal the ice maker to start producing ice. | Heater: Check the heater element for continuity and proper operation. The heater ensures that ice cubes release from the mold when ready. Replace it if it’s defective or damaged.

5. Ice Maker Module and Controls - Module Testing: The ice maker module controls the ice-making cycle’s timing and operations. Follow the manufacturer’s instructions to test its functions, such as advancing the cycle manually. | Control Board: Some ice makers have a control board that manages various functions. Test it for proper voltage and functionality using a multimeter.

6. Mechanical Components - Gears and Motors: Inspect gears, motors, and switches for any visible signs of wear or damage. Ensure that all moving parts are functioning correctly without obstruction. | Manual Activation: Manually activate mechanical components to ensure they operate smoothly and perform their intended functions.

7. Consult the Manual and Manufacturer Support - Manual: Always refer to the ice maker’s manual for specific testing procedures and troubleshooting tips. | Manufacturer Support: Contact the manufacturer’s customer support or visit their website for additional assistance, especially if you encounter specific error codes or technical issues.

Different Ice Maker and Harness styles:

Various Ice Maker Styles
Various Ice Maker Harness Styles

Find your Model Specific Ice Maker in our Amazon Storefront today!

SD PREMIUM FOOTER

Rockstarlineman
Reviewed in the United States on February 25, 2025
It does what its supposed to do. Make sure your part numbers match and you good to go. Ice is flowing like Beer and wine!
Customer
Reviewed in the United States on February 17, 2025
Fit perfectly and worked like a champ. My appliance repair guy quoted me $380 to replace it. It was one Phillips head screw and a wiring harness. Took me 5 minutes to replace.
Martin
Reviewed in Canada on January 21, 2025
Old ice maker couldn't make ice. I was able to install this one myself in my fridge and now I have ice. Just make sure that this maker is compatible with your samsung fridge before ordering. Only note I have is it was stiff fitting in place but a good push clicked it in place
Tony
Reviewed in the United States on January 15, 2025
This replacement works great and fits perfect.
Kristi Gant
Reviewed in the United States on August 3, 2024
Barely makes ice. We have had it for less than 2 months and it has not worked correctly ever.
NBaker
Reviewed in the United States on August 14, 2024
Works perfect! Very easy to install and runs like it should. Seems durable, hopefully it last a long time! Great value!
Brian
Reviewed in Canada on July 19, 2024
Easy peasy. Pull old one out, put new one in, plug in.
Bolt
Reviewed in Canada on June 10, 2024
Came early and fit like it should,,, works great
Lawrence
Reviewed in Canada on February 25, 2024
Got it within 24 hours of ordering and installed it by watching YouTube videos! The previous model had been working since 2004 before one of the gears broke, so it was about time to change it! Still working since it's installation about a month ago, so no complaints! Just remember that it takes 24 hours from the time you install it, to the time it creates the ice!
Customer
Reviewed in the United States on December 24, 2024
Easy to install and working well.
Chris P
Reviewed in Canada on October 6, 2024
Fit was perfect, easy to install. And most of all, my refrigerator is producing ice once again. It’s only been a week and hopefully it’ll last as long as the original one. It was about 12 years old.
Scott Bear
Reviewed in the United States on October 20, 2024
I wish I had known how easy it was to replace my ice maker! After going without ice for over two years, I finally decided to tackle the issue, and it took less than 15 minutes to remove the old unit and install the new one. No special tools were needed—just make sure you select the right part for your refrigerator.While the ice makers may look similar in photos, the wiring is different for each model, so double-check before purchasing. Don’t be discouraged by the installation process; it’s super easy! Now I can enjoy my cold drinks again. Highly recommend this repair part!
Dave
Reviewed in the United States on April 19, 2024
Easy install and works fine except has a tendency to pile ice a bit high if not used a lot. Much better price than original equipment.