Your cart is empty.
Your cart is empty.Product Description
Why is the 3rd Axis Bow Sight Level important in archery?
Easy Third Axis Level enables all archers to adjust their target and hunting sight for 1st, 2nd and 3rd axis to achieve the maximum accuracy for any shot angle and distance.
Without your axis adjusted correctly, your impact point will vary depending on the severity of the shot angle and distance.
The Easy Third Axis Level is easy to use as it mounts to your sight’s vertical sight bar (for target sights) or to the riser’s sight window (for hunting sights) with the non-marring nylon tipped thumb screw.
How to use the 3rd Axis Bow Sight Level?
Step 1: 1st axis leveling
Adjust the vertical sight bar which is your 1st axis by using additional Third Axis Level, which is set up so there could not be any cant in the bow. You will attach the additional Third Axis Level to a flat spot on the bow such as your riser, sight window,or your rest window. Now you will adjust the sight bar until both Third Axis Level bubbles are correlating with one another.
Now your 1st axis is set.
Step 2: 2nd axis leveling
To set your 2nd axis, you need to position both your sight level and Easy Third Axis Level to be able to see them both. Level your 2nd axis first by comparing the bubble on the Easy Third Axis Level and the bubble in your sight. Both levels should match exactly with the bow held in a horizontal position as if you were shooting on flat ground. If it bobbles, don’t match make adjustments to the 2nd axis adjustment on the sight to make the bubble in the sight correlate to the Easy Third Axis Level bubble. Once the bubbles match, your 2nd axis is set.
Step 3: Third axis leveling
For setting your 3rd axis, you need to set this level in either 30 degrees uphill or downhill angle. Draw the bow back with an arrow in it (just in case of any accidents) using your release or fingers, to at least a 30 degree downhill or uphill angle. By drawing the bow you are getting the full effects of torque on the third axis caused by drawing the bow back.
You will now use the threaded rod as your indicator to tell you the 1st axis (sight bar) is perfectly plumb. The bubble in your sight and the bubble in the Third Axis Level could be incorrect due to the torque change in the bow. Line up the vertical threaded rod with a vertical plumb surface such as a plumb door jamb. Check the bubble in the sight with the threaded rod in line with a vertical surface; the bubble in the sight needs to be in level. If the sights bubble is not in level then adjust the 3rd axis adjustment on the sight. Once the bubble in your sight is centered then your sight is completely level.
Bill P
Reviewed in the United States on May 9, 2024
This is not a precision device. The levels appear to be off. It looks to be 3D printed. I guess you get what you pay for...
Ches
Reviewed in the United States on December 8, 2024
Great means of sighting a Recurve bow. Kit comes with a weighted pendulum, bubble levels, and everything necessity to sight in a Recurve bow. Very reasonably priced.
D.C. Brooks
Reviewed in the United States on December 4, 2024
I've played with this a little, not sure how well it actually works or if i'm doing it right, but it is a neat device.
R_setnar
Reviewed in the United States on April 12, 2024
It’s very flimsy and probably not even square. I don’t trust it and sent it back.The instructions are in the picture
Vince_A
Reviewed in the United States on March 30, 2023
For the price it works out alright. The directions are not in English but there is a diagram to help set this up. There are two levels, but I only used one of them because the other would not fit as shown on the diagram. But I really don't think that it works well when trying to set up the third Axis, one may have to get a bit creative to make it work.
Randy j.
Reviewed in the United States on March 26, 2023
Easy and cheap option. Look into the lazer tool by October mountain as well.
Paul Caudill
Reviewed in the United States on December 29, 2023
I put a fast eddie on my bow. This did the trick in helping me get my 3rd axis signed up
Allan
Reviewed in the United States on November 5, 2023
The level was very difficult to get secured to my lanslyde. Even a slight bump would knock it off and I’d have to start over. It was unusable on my accutouch and could not be clamped on. I’m sure it works on other sights.
Recommended Products
$15.99
$ 6 .99 $6.99
$123.07
$ 60 .99 $60.99