Your cart is empty.
Your cart is empty. This controller has an efficient charging system and can handle high power input reach to 1920W, this controller equipped with industrial-grade STM 8 microprocessor to control the charge and discharge process. It has perfect and liable battery charge and discharge period management. The charge circuit is characterized by high efficiency and low consumption by controlling the MOSFET of the ultra-low internal resistance with PWM. This controller has multiple load control modes and adaptable to different industries. the housing of this controller is made of superior quality ABS material that is extra durable.USB output port also equipped with this controller for electrical devices charging.
User Manual is available for Download
Product Specification:
Charge Control Mode: PWM
Rated Current : 80A
Rated voltage: 12V/24V Automatic Identification
Max input Power: 960W(12V), 1920W(24V)
Installation Cable Area: 3# AWG (25mm2)
Maximum Voltage of solar panel: 48V
Float Voltage: 13.8V/27.6V
Low Voltage Disconnection: 10.7V/21.4V
Low Voltage Re-connection: 12.5V/25V
No load loss: loop voltage drop:Temperature compensation: -4mV/Cell/°C
Operating Temperature: -10℃~60℃
Storage temperature: -30℃~70℃
Humidity Requirement: ≤90％
Dimension: 128 mm×188 mm×61mm
Mounting hole spacing: 98mm×178 mm --Φ5
Net Weight: 720g
Package List:
1 x 80A Solar Charging Controller
1 x Temperature Sensor
1 x User Manual
Christopher P.
Reviewed in the United States on January 31, 2025
Right On
roustabout bill
Reviewed in the United States on January 13, 2025
This Solar Charge Controller 80A- PWM 12V/ 24V -1920W -Solar Panel Charger- is an overall excellent choice for multiple solar/ battery bank systems. Some I have charging 24-volt battery banks, and some are on 12-volt systems, and these are the best for the amount of charging and battery info -on one screen. I never go over 80 amps total panel input, and they just keep working and charging day after day. I needed one more for a 24-volt - four solar panel system- with a 4- 6v - 430 AH each- battery bank that powers a 24 volt- 220-volt output- inverter that is running a deep well pump easily with no overheating, etc. Excellent charge controller! Great find!
Jeff
Reviewed in the United States on September 13, 2024
Good value easy to install good quality no noise.
edward
Reviewed in the United States on June 4, 2024
These PWM controllers work well for lead acid batteries. Over the last year mine has been running 24/7 to power an off grid cabin in the desert. It charges (8) 29dc lead acid batteries a 10kwh bank using (6) 260w solar panels. At 24v 2000w of solar capability cannot be found in this price range anywhere. I would not use for lifepo4 batteries as the pulse width mod is designed for lead acid and may damage lifepo4 over time. Some of the negative reviews could be caused by too much solar watts at 12v. Loose wire connections (always check a week or so after install) can cause burnt connectors. I’ve seen that in victron controllers as well. It has worked in freezing temps as well as 115 degree heat and my fridge has never stopped running, my water pump and lighting have always worked as this provided enough recovery solar input to charge my batteries and run the inverter. As for the load output, it clearly states that it is 300w not 80 amps as some have claimed advertised. The load function on these controllers is only designed to run low powered lighting, timers or relays not power your home. The 80 amps go to the battery people.
Oscar
Reviewed in the United States on June 22, 2024
Bought two and am replacing a third one with this now.Works much better than my previous controller which was a bit more expensive. Each controller is hooked up to two 200 watt panels for input total of 400 watts per controller. No issues with full summer sun. The output shuts off when battery is charged and display shows a notification of this.They seem solid and have been running for about three months in a hot humid shed.
Perfect
Reviewed in Australia on May 25, 2024
12volt solar connection
Sesin
Reviewed in Mexico on February 7, 2024
Me gustò que es lo que yo esperaba y funciona muy bien.
james
Reviewed in the United States on December 28, 2024
This “charge controller “ overcharged my batteries and damaged 2 of them. Do yourself a favor and buy a good one. This thing is garbage.
John Casey
Reviewed in the United States on November 18, 2024
Seems to work great! The contrast on the display could be slightly darker.
D. Turner
Reviewed in the United States on June 27, 2023
The only thing I would change about this controller would be to add a backlight that you can turn on and off. It does not have a back light. Easily set up and programmed, and the wire connectors will let you use the appropriate gauge of wire for 60 amps. Load output is 25 amps. I have a small 4-100 watt panels with lead acid batteries and this controller works very well with this setup and has capacity for me to expand my system some should I need to expand.
Retired shopper
Reviewed in Canada on June 20, 2023
I'm using this controller to drive two 12v 80 watt fans. Power is from a 200 watt solar panel and 12 v battery. I tried a 30 watt controller and it wouldn't start the fans and just went down on load fault. This larger controller works flawlessly. Starts both fans when voltage is above setpoint of 12.2 v and shuts down both fans when below 10.6 volts.
Old Crow's
Reviewed in Canada on June 2, 2023
I've been trusting this controller for my off-grid living. It's been about 2 months since I started using it and it's been working great so far.I've connected this charger to 6 solar panels in parallel. Each panels is 260watts, 37.7 Vmax and 8.8Amax.It's then charging 9 regular lead acid car batteries in parrallel (so 12volts). For a complete explanation see my youtube channel worldcitizen and Old Crow's Classic CarsThis charger has a maximum input voltage (from solar panels) of 48volts, and also has amperage rating of 80amps which is Huge....although I've never used nearly that much amperage.It was easy and fast to install although the instruction manual is barely understandable.
BTC4ME
Reviewed in Canada on July 9, 2022
I connected this unit to a 900w system and am pleased with the ease of installation and product performance. The monitoring screen is a useful feature. I like this controller and recommend it; priced well.
Recommended Products
