I was a little worried after reading some of the negative reviews concerning jams and jamming. But some of the other reviews that mentioned making sure you follow the recommended type of ammo you use were more important. I bought the recommended ammo type and weight and haven't experienced any jamming at all. Additionally, loading the CO2 cartridge was so seamless I couldn't even hear any of the gas being released, so wasn't sure it was loaded properly until I took it outside and took a few shots. So really confident the cartridges won't leak and will last a while even when not in use.

Man this gun is awesome, but comes with many problems including a permanent gun jam.Yes.So why did I give it 4 stars?I loaded the gun put CO2 in and shot half the clip and it was so much fun...until it jammed.I could not get the clip out, it wouldn't even budge.NOPE.1st day I bought it.I didn't even finish the clip!SMHSo I said I gone calm down and let this sit til tomorrow and come back.Next day I wrestled with the gun for 3 hours to get the clip out...NOPE!STILL NOT BUDGING.I GOT FRUSTRATED AND THREW THE DANG THING AND WENT IN THE HOUSE.Day 3, after 4 hours wrestling with the gun, I contacted AMAZON and told them the story and asked for Refund, but no refund cam be issued for this gun.I Became FURIOUS.I STARTED THROWING THIS GUN ALL AROUND.I ACCEPTED THE FACT THAT I JUST WASTED $100 AND DECIDED TO HAVE FUN DESTROYING THE GUN, KIND OF GET MY MONEY'S WORTH.BIG NO NO.THE GUN MAKERS MADE THE GUN SO GOOD IT WAS HARD TO DESTROY IT.SO I THREW IT AROUND SOME MORE ON SAFETY SO I DID NOT ACCIDENTALLY SHOOT MYSELF IF GUN WENT OFFNOTHING.SO I TOOK A MALLOT AND BEGIN TO HIT IT WITH A MALLOT, AND THE CLIP BEGAN TO BE A LITTLE LOOSE.SO I GOT A MONKEY WRENCH AND PULLED ON THE CLIP REPEATEDLY UNTIL I BROKE THE BOTTOM PART OF OF CLIPI TRIED EVERYTHING REPEATEDLY PUSHING CLIP RELEASE WHILE PULLING CLIPNOTHINGBUT AT LEAST NOW THE CLIP WAS TRYING TO EJECTI GOT SO MAD I STARTED PRAYING AND TALKING TO GOD ABOUT IT REPENTING FOR BUYING THIS GUN WASTING HIS MONEYTHEN GOD SAID, PUT IN FRESH CO2 AND USE MONKEY WRENCH TO JIGGLE IT WHILE TRYING TO PULLING OUT AT SAME TIME REPEATEDLY PUSHING CLIP RELEASEVOILA!THANK YOU LORD JESUS!I BEAT THIS GUN UP PRETTY BAD BUT NOTHING ON IT BROKE, MADE IT A LIL UGLY BUT NOTHING BROKEGOOD CONSTRUCTIONMESSED AROUND WITH CLIP TO TRY TO UNDERSTAND IT'S MECHANICS, RELOADED IT, AND IT SHOT FINE, TIL IT GOT TO THE END AND JAMMED AGAINGOD SAID REPLACE THE CO2I DID AND IT WORKED AGAIN BUT JAMMED AGAIN AND WITH SAME PUSHING CLIP RELEASE AND PULLING ON CLIP WITH MONKEY WRENCH AND THIS HAPPENED A FEW MORE TIMESBUT THE PERFORMANCE OF THE GUN WHEN IT WORKS IS EXCELLENT!HALLELUYAH!BUT I THINK IT BEST, IF YOU RUN A 30 ROUND CLIP, GO SLOW AND REPLACE CO2 AT END OF CLIPBLOWBACK BURNS THRU CO2 LIKE TRIPLE SHOT EFFECTYOU ONLY GONE GET 25 ROUNDS BEFORE CO2 RUN OUTSO I DECIDE TO ORDER 20 ROUND CLIP AND SEE HOW IT GOESFYI:THE ONLY REASON I CHOSE THIS GUN OVER THE OTHER 10 OPTIONS WAS THE 30 ROUND CLIP, BUT IF 20 ROUNDS WORK WITHOUT FAIL SO BE IT.SO IF YOU BUY THIS GUN AND IT JAMS AND YOU CANNOT RETURN IT, DO NOT THROW IT AWAYAS A AIR GUNNER, HOBBYIST, YOU HAVE TO BE PREPARED TO SOLVE PROBLEMS WIT YOUR EQUIPMENTI WAS GOING TO THROW IT AWAY AFTER I DESTROYED IT, THANK GOD I PRAYED ABOUT IT 1STDO NOT THROW YOUR GUN/$100 AWAYBEFORE YOU DESTROY IT, TAKE A MALLOT AND HIT THE FRAME A FEW TIMES, THEN GET MONKEY WRENCH AND PULL ON THE CLIP FROM BOTTOM AND REPEATEDLY PUSH CLIP RELEASEIF YOU DESTROY CLIP BOTTOM, USE MONKEY WRENCK TO CLIP ON 1 OF 2 PIECES STICKING OUT AT BOTTOM OF CLIP THAT WAS USED TO CONNECT BOTTOM OF CLIP TO CLIPGENTLY AND NOT SO GENTLY TUG AT IT WHILE PULLING RELEASEMY NEW 20 ROUND CLIPS WILL BE HERE SOON AND IF NO PROBLEM AT ALL, I WILL UPDATE.DRONE ON...

Feels and shoots like a real pistol. Blowback feature is great and very accurate shooting. Fun target pratice!

This is my third airsoft pistol, and by far my favorite! First off, there's no orange tip, which aids in a realistic look. No, I will not be taking it out in public and waving it around. It has a decent weight which also helps in realism. Kudos for the "functioning" hammer (it's only aesthetic, but does cock when you rack the slide and fall when the trigger is pulled). Again, helps with realism. Some people say the power is weak, but even though its rated at only 200 FPS, when I shoot the metal (steel...?) BBs included with the gun I get a good SMACK! when I shoot trees in my backyard at 10 yards or so. The BBs fly straight and true. The safety works, but only prevents the trigger from being pulled. It doesn't stop you from racking the slide.The only downside to this airsoft pistol is the several BBs do fall out of the gun when a loaded magazine is ejected, as others have mentioned. I did some research into this, and it seems to be a common plague among airsofts due to several BBs leaving the magazine and entering the "feed tube" at once but only one BB actually being chambered at a time. So when you eject the magazine, the extras in the feed tube fall back out. No big deal, it doesn't effect the performance of the gun at all, and I'll probably only be ejecting the magazine when its empty anyway to reload. I was going to dock it one star for this but since it exceeds expectations in every other way, 5 stars it is!For just over 20 bucks, get it!

Looks nice, but not efficient with many issues. Shot the first magazine flawlessly with no issues, but once i started the 2nd mag, it started to jam repeatedly and the mag release wont eject the mag. Spent more time trying to get the mag out than actually shooting the airgun. The belt conveyor in the magazine is of poor quality, it doesn't rotate smoothly without guidance from my fingers which i believe is causing the jammings issues. Also the door on the mag opens way to easily and was opened when i finally got my mag out. Thats probably why the mag wont come out because the door opened while it was in the grip. Save your money, this thing sucks