Your cart is empty.
Your cart is empty.Product Description
Customer
Reviewed in Canada on July 27, 2024
Not much to say here, a shim is a shim. For the price it would have been nice to get one more 1mm shim in the kit but this definitely gives you enough to do 1 bike. Other reviews mentioned the thickness not being as advertised, but I did not find that to be the case.
Matthew
Reviewed in the United States on June 30, 2024
Added a 1.5mm shim to my hisun 700. Worked great. The hisun/massimo or other clones of the rhino 660/700 are the same
Samantha Leblanc
Reviewed in Canada on June 18, 2024
Banging wheelies now on my 700
Daniel
Reviewed in Canada on November 20, 2024
They fit my 08 yamaha grizzly 700 clutch and seem to be a slight improvement and low end torque. Bought to try cause I'm running 28 inch tires
Adam4962
Reviewed in the United States on November 18, 2024
Nice
Customer
Reviewed in Canada on July 18, 2023
You need to use a micrometer to get the actual thicknessThe .5 shims were actually .3 The others we’re pretty close.Ended up installing a thickness of 1.67 mm which still gave me clearance on the cover Had a noticeable bottom end boost and still enough top speed for my trail riding. It dropped but can still do over 60 km/hr. Should be easier on my wet clutch07 660 rhino 28” zillas tires epi clutch kit 16oz weights
Customer
Reviewed in Canada on October 14, 2023
Use a micrometer before installing these. All shims but the 1mm do not measure too size
Richard Nelson
Reviewed in the United States on May 3, 2022
Item as Described, Prompt Delivery. I went with 1.5mm set up
Amanda Green
Reviewed in the United States on June 10, 2021
As expected
Customer
Reviewed in the United States on September 9, 2020
Fit my 09 grizzly 450 as it should, had some good low end torque.
becky
Reviewed in the United States on September 27, 2020
put in 1.3 im pretty sure. Low gear really came alive
The Davis's
Reviewed in the United States on June 19, 2020
Fit my 04 Bruin great. Used 1mm shim. Quad gained some nice low end. "Feels" like I have a high stall converter now.
Scott Morris
Reviewed in the United States on November 6, 2020
Right diameter and works on my 2002 Grizzly 660, however, make sure you use a micrometer to make sure that you are shimming the amount that you’re wanting. They run a little bit bigger than advertised, I wanted to run 1.8mm of shims. First I used a 1mm, a 0.5mm, then a 0.3mm and it came out to be 2.0mm on my micrometer. I wound up having to use one 1.0mm and two 0.3mm shims to get the 1.8mm that I was wanting. Overall, still a good product and would buy again.
Recommended Products
$54.05
$ 23 .99 $23.99
$92.00
$ 38 .99 $38.99