Your cart is empty.
Your cart is empty.
It feels great to have a solid controller with no issues once again. A much better solution here than wasting time sending these in for repairs.
Features:
1. This bumper buttons kit is specially designed for Xbox One Elite and Xbox one controller with 3.5mm Headphone Jack.
2. Perfect to repair your broken bumper buttons or dysfunctional wireless controller shell.
3. Product design is simple and accurate, very easy to install and use.
4. Made of high quality ABS material, wear-resistant and durable. Precision design, perfect for your controller.
5. Packaged in a exquisite box, not easy damaged in transit
Package Include:
2 x Bumper Button
1 x T8 Screwdriver
1 x T6 Screwdriver
1 x Triangle prying tool
1 x Single-ended prying tool
Note:
This bumpers part will not fit in the earlier version Xbox One controller.
Theodore
Reviewed in Canada on June 19, 2024
Poor tolerance and causes sticking. Not within tolerance and plastic is cheaper than the original. Save your money
Dan Flores
Reviewed in the United States on April 23, 2024
These installed easy, love the tools that come with them. It DOES NOT match the original color. Cheap/thin plastic. For the light gamer it’s fine, but if you’re rough on the bumper buttons might not hold up
Linden
Reviewed in the United States on September 16, 2023
Replacement of my buttons went smoothly enough. Unfortunately the blue pry bar shattered at the tip when opening the controller. Luckily I had my own on hand to finish the installation. Still a good value otherwise.
Cliente de
Reviewed in Mexico on August 24, 2023
El producto cumple con su función al 100%, el material se ve aceptable, un poco menos brillante que el original, ha superado ya las primeras horas de uso funcionando pefectamente.La instalación es sencilla, pero si recomiendo ver un video, hay muchos en las plataformas.
BMF
Reviewed in Canada on June 24, 2023
The color did not match the original parts but that's not a big deal, what is a big deal is that the fit of the parts is a bit off so one of the two bumpers wouldn't even work and the other one had to be used with the original retaining clip from the elite controller to not get stuck when pressed down.
Customer
Reviewed in Canada on November 15, 2023
I did not read the features in depth. These are just the plastic components and not the micro switches that are usually the issue if the LB/RB buttons are not working.
Squisha
Reviewed in the United States on September 18, 2022
I broke the RB on my model 1697 Xbox One controller.I purchased this kit as it had everything needed. The spudger (the little plastic pry tool) is very soft (a feature, not a bug) so two of them should really be included since there's two replacement bumper sets. They're meant to be single use, because they get chewed up pretty good. The alternative is chewing up the controller body.So that's my only real gripe, and it's minor. The install itself was easy with the help of a few YouTube videos. It was only a bit fiddly getting the bumper slot correctly positioned on the controller. On my first try, I didn't have it quite right and I knew it because pressing the bumper would activate the trigger. After a bit, I figured out where it needed to go and it popped right on. After that, reassembly went quickly & the result is functionally identical to the original, and aesthetically it's an improvement.I wouldn't hesitate to recommend this product.
phi
Reviewed in Singapore on November 22, 2022
There are no instructions. So you need to view videos online beforehand. One tip in trying to place the new bumper is to position the bumper one side at a time. The front cover should be resting on the Xbox button it should not be through the front cover yet just depressed so that you can position the bumper. Check that the horizontal bar is pressing the bumper button. Before pressing in the front cover you'll be able to press the button to see that it clicks. The video I found online was difficult to see this part.
Eric Myers
Reviewed in the United States on November 18, 2022
I have to admit that I bought this with a little fear considering that I have never even taken a controller apart at all, period, but I took a gamble because worst case scenario, I could send the reminents to a controller repair shop if I did mess it up. To my surprise, it was super easy, I literally took the controller apart, inserted the new bumpers, and reassembled in 10 minutes. The tools worked great, everything about this kit is 5 stars. I highly recommend this kit!
In IN
Reviewed in the United States on October 18, 2022
For those willing to void their warranty on their elite controllers, these are goldI've recently gotten into repairing and maintaining my own controller after realizing Microsoft makes frail controllers. I love the elite series 1 controller and how it feels and responds [when it works] which is why it was worth putting in the work to repair itJust know this is something you'll have to do oftenThe part is great, having the backup part is even betterAll the provided tools work great, it was a complete set!Highly recommend to any controller repairman
Brett
Reviewed in the United States on March 30, 2020
Fit the original Elite controller, pretty much just like new.Honestly, just the fact that I was able to get replacements, and they actually fit and function the same is marvelous.The gaps on the bumpers are not 100% the same, but it's really impossible to tell the difference unless someone holds them together and points out which one is from MicrosoftFrom what I can tell, it looks like the exact spot the my bumpers failed is a bit thicker on these pieces. In the end it just means a bit more plastic, but I'm hoping that the extra plastic will help the bumpers from failing any time soon. At the very least, you do get two replacements in the package.All the tools helped dearly. If I could complain, I'd admit that the TORX screwdrivers are made with some soft metal (shavings coming off of them) so they'll lose their threads pretty quickly. BUT they should be good for two replacements worth, so not really concerned at all.This kit is a tad expensive, but it's self contained. You have everything you need here, and the replacements are quality.
S.
Reviewed in the United States on November 10, 2020
I feel like I paid way too much for my controller to have to do this but this product is a cheap, easy, and effective fix. I don't write a ton of reviews but went out of my way for this one because of two things: Two bumper repairs are included and the screwdrivers are included. The double set is appreciated because it's a flimsy product by design and can easily be broken during the replacement. Great repair and would recommend 100%.
Recommended Products
