Package Includes:

• (1) Rockville ROCKMIX 6FX 6 Channel Mixer USB Computer Recording Interface+Effects
• (2) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• (2) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• (2) Rockville RDTS Adjustable Height Studio Desktop Tripod Microphone Stand+Mic Clip
• (1) Rockville RHPA4 4 Channel Professional Headphone Amplifier Stereo or Mono Amp
• (1) Rockville RCTR106B 6' 1/4'' TRS to 1/4'' TRS Balanced Cable, Black, 100% Copper

What's in the Box:

• Mixer
• Power Adapter
• User Manual
• USB interface cable

What's Included:

• RCM03 Condenser Microphone (made of aluminum!)
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
• Metal shock mount
• Metal Anti-wind foam cap
• Owners Manual
• Warranty card

Includes:

• Pro-m50 headphones
• Detachable cable
• Soft suede and leather ear cushions (interchangeable)
• Leather hard travel protective case
• Gold plated ¼” adapter

• Built in USB interface will send the Main Mix to your favorite DAW
• Interface will be identified and addressed as an external sound card in your DAW
• Peak LED indicator detects clipping on channel (CH1-2)
• Main mix has left and right LED volume meters and clip indicators
• Power on LED indicator
• Our design is Simple, flexible, and highly-efficient
• Super linear mic preamp with low noise (this uses a top of the line mic pre normally found in very expensive mixers)
• This mixer is built out of solid steel metal and when you pick it up you immediately can feel the weight and how solid it is
• All knobs and potentiometers are super sturdy and linear
• 48V phantom power for condenser microphones on CH1 and 2
• BUS powered allows you to power the mixer by plugging it into the USB port of your computer or laptop
• Mixer includes a power adapter so you can power the mixer either through the wall or USB
• British EQ circuitry is designed to emulate the classic EQ from the legendary mixers that came out in the 1950’s, 60’s and 70’s
• Dimensions: (L x W x H) 8.27" x 6.22" x 2.09"

Features of RCM03:

• Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• Aluminum high quality construction
• Polar Pattern: Internally Polarized Condenser Cardioid Design
• Large diaphragm for smooth, natural sound and low noise
• Power Requirements: 48V DC Phantom Power
• Uni-directional
• Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
• Output impedance: 200Ω±30%(at 1kHz)
• Standard operating voltage: 3V
• Operating voltage range: 1.5V-10V
• Current consumption: less than 500uA
• Voltage deduction characteristic: within 3dB at 2V
• S/N ratio: More than 24dB
• Frequency Response: 30Hz - 20 KHz

• Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
• Load impedance: Greater or = to 1000 Ohms
• Equivalent Noise level: Less than 18dB A (IEC581-5)
• Max. Input SPL: 126dB(THD≤1.0% at 1kHZ)
• Electrical current: Greater than 4.8Ma
• Microphone body net weight:320 Grams (0.7 Pounds)
• Microphone Max.diameter 44mm (1.73” inches)
• Microphone Length 217mm (8.54” inches)
• Microphone material: steel grille + Alluminum (handheld part)
• PCB Layout: Surface mount

Features of PRO-M50:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• Professional High-Definition Studio Headphones
• 40mm Neodymium drivers
• Ergonomically designed swivel ear cups
• Supreme sound isolation
• Accurate sound reproduction
• Minimal bleed
• Sturdy and durable steel headband and arms
• Soft leather headband cover
• Interchangeable leather and soft suede ear cups covers included
• Detachable 51” coil cable made of 100% Oxygen Free Copper (158” fully extended)
• Gold plated 3.5mm connector
• Gold plated ¼” adapter
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting

Features of RDTS:

• Rockville RDTS Adjustable Height Studio Desktop Tripod Microphone Stand and Mic Clip
• Includes standard mic clip for regular mics
• For condenser mics – this is compatible with any shock mount (Rockville Rockshock is recommended)
• Compatible with Rockville IPS22 phone/tablet holder (sold separately in our store)
• Foldable design
• Adjustable height from 5.9” to 7.1” inches
• Includes standard mic clip
• Includes a Metal 3/8 to 5/8 adapter to support any mic clip on the market
• All metal construction is extremely strong and durable
• Smoothly raise or lower height with a reliable tightening knob
• Stable tripod leg base provides the ultimate stability and precise balance
• Perfect for studio recording, home recording, podcasts, screen-casts, video chats, conferences, and more

Features of RHPA4:

• Rockville RHPA4 4-Channel Professional Headphone Amplifier
• Inputs: ¼” and 3.5 mm input
• Stereo or Mono switch
• We include (4) ¼” TRS and (4) 3.5 mm headphone outputs run in parallel which means you can actually run 8 headphones (2 per channel)
• 4 Outputs each output has individual volume controls
• Thick metal shell casing
• High quality potentiometer knobs for each channel
• Power "On” LED.
• DC 5V USB power supply has low power consumption
• BUS powered means you can get power to the unit from a power bank or through the USB on a computer or laptop
• Rubber feet

Features of RCTR106B:

• Rockville RCTR106 Nickel-Plated, 1/4'' TRS to 1/4'' TRS Balanced Cable
• 100% Copper Conductors for Enhanced Signal Clarity
• OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
• Length: 6 Ft
• Color: Black