Your cart is empty.

QISF 5 PCS 900M-T-B + 5 PCS 900M-T-I Lead-free Soldering Solder Iron Tips Replacement for Hakko, Radio Shack, TENMA, ATTEN, QUICK, Aoyue, Yihua Soldering Station And More Tool

4.7 (8) Write Review

Free shipping on orders over $29.99

$8.71

$ 3 .99 $3.99

In Stock

Qty.:

Designed:Heater soldering iron tools are easy to use and can bring you much convenience;
Material:High-strength and heat-resistant oxygen-free copper for durable use
Fits: 900M-T-B Suitable for 936, 937, 938, 969, 8586, 852D soldering station; 900M-T-I Suitable for 936, 937
Why choose it:Over 20000 welding joints,Not easily oxidized, easy to install and use,high safety and stable performance;
Package content: 5 Pcs 900M-T-B soldering iron tips + 5 Pcs 900M-T-I soldering iron tips

Product Description

Specification:Soldering Iron Tip
Model : 900M-T-B
Temperature Range: 200℃~480℃
Suitable for: 936, 937, 938, 969, 8586, 852D soldering station
Material : Metal ;
Design : Point;
Total Length : 43mm/1.7""
Shank Diameter : 6.5mm;
Hole Inside Dia : 4mm ;
Point Dia : 1.2mm;
Color : Silver Tone ;
Specification:Soldering Iron Tip
Model: 900M-T-I
Suitable For: 936, 937
Outer Diameter: Approx. 6mm/ 0.24"
Inner Diameter: Approx. 4mm/ 0.16"
Length: Approx. 4.2cm/ 1.65"
Package Content : 10 x Soldering Iron Tip (Include: 5 Pcs 900M-T-B soldering iron tips and 5 Pcs 900M-T-I soldering iron tips )
It has advantage of long life lasting and not easily oxidate, easy to install and use. A great replacement tip for your standard soldering iron.
Notice:To maintain the performance of a soldering iron tip, a simple maintenance procedure is recommended:
1.Operate at the lowest possible temperature (800°F (427°C) or lower. Operating at which is one of the major causes of detinning.
2.For tip wiping: use only (sulfur-free) pure cellulose sponges; wet to the touch.
3.Add rosin core solder of adequate diameter to the working end of the tip regularly.
4.Don't leave your iron running for hours and hours if you are not using it. This can make the tip get black oxide cover.

Soldering Iron Tip

It has high safety and stable performance.
Quite easy to take and clean.
Use the sponge to polish the surface.

Soldering Iron Tip

Material: Oxygen-free copper
Not less than 20,000 solder joints, suitable for lead-free soldering.

Soldering Iron Tip

900M-T-B Suitable for: 936, 937, 938, 969, 8586, 852D soldering station
900M-T-I Suitable for: 936, 937

Qzack

Reviewed in the United States on January 13, 2024

I have a TOAUTO Soldering Station. i bought these tips as the one I used frequently with my station finally went out. Solder wouldn't stick and it didn't do the job. These tips fit and they work but require me to increase my temperature control dial to around 540-590 Degrees Fahrenheit. The original tip for my station worked at around 420-470 or so. I have found myself being extra careful with these needing more heat as one can have the tendency to burn pads off a board or other disastrous effects. Due to the heat issue I am leaving a 4-Stars.

Gilbert G

Reviewed in the United States on August 31, 2023

QISF 5 PCS 900M-T-B + 5 PCS 900M-T-I are what I needed, does a great job. So far working well with one tip having no problems

David K.

Reviewed in the United States on August 20, 2023

Allows for pinpoint application of heat for soldering tight spots. C

Tristan Dale Brown

Reviewed in the United States on December 14, 2023

Thanks for making a good product.

TechGReviews

Reviewed in the United States on October 2, 2023

Didn't stick to the solder right away like the original that came with my iron but after a little while of use it sticks just fine. The smaller tips are very sharp! good for getting little components off!

Shawn

Reviewed in the United States on June 30, 2020

I got these tips to replace the original tip that actually started to break down. These tips have remained in good condition. I am still on the first one! Nice deal for the price.

Dave

Reviewed in the United States on March 30, 2020

I don't do a lot of soldering, but I occasionally repair my bass guitars and found that the tips I received with my entry-level soldering kit didn't last long so I bought these. Very pleased, and they are inexpensive. Satisfied!

Joseph Mattioni

Reviewed in the United States on May 15, 2019

Good quality and fit my X-TRONIC 9000 series soldering station. The smallest bit is very good for micro-soldering.

Shopping Cart

Your cart is empty.

QISF 5 PCS 900M-T-B + 5 PCS 900M-T-I Lead-free Soldering Solder Iron Tips Replacement for Hakko, Radio Shack, TENMA, ATTEN, QUICK, Aoyue, Yihua Soldering Station And More Tool

Product Description

Soldering Iron Tip

Soldering Iron Tip

Soldering Iron Tip