Garbage! Quit working after 2 months!

Worked well, as advertised, easy to replace.

Installed it in the fan and it works perfectly. Easy to install,

It works and is priced right

This was a bit difficult to rate. I have 2 identical wireless remote controlled fans (on different levels) that run on the same frequency, which can not be changed. So I can not use one remote without it affecting both fans. I purchased this receiver and remote in hopes of fixing that issue. Unfortunately, this universal remote and receiver also run on that same frequency. Which also can not be changed. If you have a singular wireless remote controlled fan and need to replace a failed receiver or remote, this is for you. Or if your fans equipped with dip switches to change frequencies like a garage door opener with wireless entry pad would have for example, then this set up would also work for you. But if your like me and have multiple fans running off the same frequencies with no way to change the frequencies, this isn't for you and will not solve your problem.

Got this to replace one our dog had chewed up the remote to. Simple to install, just make sure you program the remote. I thought something was wrong until I read further down on the instructions. Program was Simple and quick.

The case was too big to fit in the designated area, so I dismantled it and just used the circuit board/wires. Works perfectly.

Works great on its own but I wanted it as a second remote and it didn’t work.

So yeah....super pleased and happy with this purchase. The receiver part that goes into your ceiling fans shroud is the right size. Tiny. It connects with minimal effort and works VERY well. The problem I've always had with these things is always the crappy remote and the even crappier remote sensor in the receiver. This one however works with an rf signal instead of the old line of sight infrared type or whatever. Not once have I pressed a remote button that the fan disnt respond to. Every single time I press a button it simply works with no problem. Radio frequency (RF) is so much better than the older styles of these things. Your local big box building supply stores want upwards of $30-$40 for these remote control units and don't work nearly as well. I spent about $14 on this one and when the time comes to install another into one of my fans i know for sure I'll be buying another one of these. It works perfectly. Always.

Le entrega fue rapida de un dia para otro, todas las funciones trabajan bien hasta ahora con un mes de uso.

I first bought one of these to make sure it would work and was compatible with the fan/light I installed for my kids, and was pleased enough with it that I bought a second one for the fan/light in my other kid's room! Having/leaving the handheld RF remote on my kids' nightstand is a great convenience, and does away with the need for pull chains. The controller also turns on the light if it loses power and then power is restored, so this allows the light to be turned on by flicking the wall switch (typically near entry to the room) off/on regardless of the last state set by the remote. This alleviates the need to mount the remote/holster near the room entrance, and you can always turn on the light from the wall switch. As someone indicated, this means the light will turn on in the event of power restoral after a failure, but if your electrical power is stable, this is a minor issue as a trade-off for the convenience.Pros:* The controller is pre-paired at the factory, so it's ready to go once the controller has been installed.* I had no conflicts with two separate controllers and remotes in adjacent rooms. They work really reliably!* Range is excellent. As I said, these are RF, so you don't need line-of-sight, and it'll work around corners or through walls. The antenna is inside the enclosure and not hanging out as illustrated in pictures, but even inside a metallic dome/cover, it seems to have no issues receiving signals from the remote control.* 3 different fan speeds are comparable with the fan's 3 speeds.* Audible beep is a good confirmation that a command has been received.* Really easy to connect -- uses conventional wire colouring.* If you really want to disable the beep sound, you can de-solder the piezo electric buzzer mounted on the PCB inside. It's really easy to access. But I don't find it that loud or annoying, myself, and prefer to keep it.Cons:* Wires are about as short as could be, and there is no slack -- it would've been nice to have a few extra inches.* No method of mounting is provided -- it would have been nice to have holes for zip/cable ties, and maybe provide ties or velcro, but you have to figure this out entirely yourself.* Wiring is 20 AWG (stranded), so thinner than house wiring, but then my fan's wiring was 18 AWG. I would've expected 16-18 AWG for this controller.* The way the wires come out (straddling the unit) makes it a bit difficult to mount while keeping tidy (recall I said wires are short). To get around this, I opened the unit and routed all 5 wires out a single hole, which made it easier to mount neatly.I've provided pictures of my controller installed, zip-tied to the mounting bracket. In the second picture, where you can see the white label, this is the hole where the neutral and hot wires used to come out; I moved them all to the other side to allow easier connections, because the wires protruded only maybe 4" from the unit. Luckily there was enough space under the fan motor cover for me to mount it this way.Overall, a great fan/light controller that extends the usability of most fans.

Buena opcion para sustituir un receptor dañado. La velocidad del ventilador es menor que la que daba con el control original, de hecho en la velocidad 1 ni siquiera se mantiene, gira un par de veces muy despacio y se apaga. La velocidad 2 es mas o menos como la 1 de mi control original y la 3 seria como la 2. Asi que basicamente ya no tengo la velocidad mas alta, lo cual no me preocupa ya que nunca las usaba. Pero es algo a tener en cuenta si vas a comprarlo. Todas las demas funciones son las correctas y no tube ningun otro problema.Otra cosa a tener en cuenta es que en las fotos se ve un cable adicional de antena, el cual no trae la unidad que recibi, pero al parecer el modelo que recibi tiene la antena interna y funciona sin problemas, solo que no han actualizado las imagenes.

Upgraded the fans in the house and decided to add this to the living room. Love this!! the timer feature is great for these, set it for a few hours and not worry about forgetting to turn off. FYI the lights get controlled by this but if you use the wall switch it will still over ride this, ( IE if you leave the switch on the wall on you use the remote as you wish, but if you want to use the wall switch to turn it off when you leave the room it will turn it off, then when you reenter the room, the wall switch can be used to turn it on. so you dont have to carry the remote in or out of the room as you enter or exit. andif you cant find the remote you're not stuck" )