Your cart is empty.
Your cart is empty.Product Description
Dominator Cycles is a manufacturer of premium quality and distinctly styled motorcycle parts and accessories. All of our products are designed and made in the USA and our five-star customer support, customized products, and limited lifetime coverage will make Dominator a partner you and your bike can partner with for years to come.
All of our bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment.
All of our parts are hand-made in the USA employing a multi-step manufacturing process using the finest materials. We pride ourselves on being a manufacturer of premium quality and distinctly styled motorcycle parts and accessories.
- Lifetime Coverage against manufacturer defects
- All bars are Fully TIG Welded
- Beveled & De-Burred
Superior Quality
There have been many copycat attempts to replicate our products but many customers over the years have come back because of our superior quality.
We also pride ourselves in our smooth and clean arched corners whereas competitors often use straight sharp edges which are easier to manufacture but fall short of the premium styling distinguishing riders’ demand.
- Carefully designed to provide natural, relaxed grip angles
- Optimal pullback comfort
- Direct bolt-on replacements for stock equipment
- Hassle-free installation of bar tubes
Dominator works on the principle belief that riders want the best of the best with no compromises. Ride comfort and easy installation make choosing Dominator Industries handlebars to customize your bike a no-brainer.
All in 1 Handlebar Kits!
Dominator Industries has partnered with Cable Kits Brand to create a one-stop handlebar kit solution. These kits are strictly comprised of components manufactured in the United States. It’s everything you’ll need to complete a quality bar install.
The Original Pre-Wired
What is it worth to have your project be as simple and easy as possible? We feel it’s worth everything so we’ve gone ahead and done all of the hard work for you. Our bars are prewired with your switch wiring and set up with the ability to pull your existing twist grip sensor in literally under 10 minutes!
Saves Money
We all know what the dealer charges to switch out and wire your bars, or any experienced tech! We’re extremely confident that we can save you hundreds of dollars! Who doesn’t wanna save money!?
Remove the Headache
Those of us who have swapped our bars know, beyond a shadow of a doubt, that wiring new bars can be a daunting task. Because of this, we set out to fix that and provide you with solutions that virtually eliminates the headache.
For many bikers riding a motorcycle is not a hobby or need, it’s Passion.
We get that. The sheer enjoyment of being on a motorcycle with the open air with the wind brushing through your face, the sound of the engine and the vibration you feel. It’s an embracement of the senses and what we try to convey into every Dominator product.
Bryan
Reviewed in the United States on December 8, 2024
They’re good bars. I just wish they were have a bigger diameter.
Customer
Reviewed in the United States on November 16, 2024
These handle bars are great. Nice workmanship easy to install. Dominator thought of everything you need, except tools, to do it right and fast. The hardest part was pulling the shrink wrap over the throttle wires. Watch the videos and read through the instructions for all the tricks to make it a smooth install. The whole job took me a little over 3 hours and I was taking my time to do it right the first time.
Kimberly Ann Ashmore
Reviewed in the United States on September 15, 2022
These bars look like they had a rat gnaw the port in them. there are razor sharp sharktooth burrs in the opening, as well as burrs in the meathook bend that were snagging and cutting my wire. After pulling my heated grip wires through and seeing all the cuts in the wires, I did not feel safe plugging the grips into my brand new $56000 2022 CVO road glide with 30 miles on it. There is zero excuse for bars to be sent out with issues like this. there was weld splatter coming out while I was pulling the wire as well. These meathooks are hard enough to fish wire through when they are smooth, add sharp edges and its a nightmare. I contacted the seller directly asking for them to work with me on the $300 heated Kahuna grips their bars destroyed and they told me I had to go through amazon even though the product is sold and shipped from Dominator Cycles.the only option amazon has is to pull them off and try to pull out my twist grip sensor without breaking that on their burrs, and send the bars back, which leaves me with no bars and non functioning heated grips and a possibly destroyed twist grip sensor. not to mention all the wasted labor time installing and removing these bars.This company clearly does not stand behind their product whatsoever. I highly recommend buying Factory 47 bars, as they have much better quality control. I will never buy another product from Dominator Cycles again
Kevin
Reviewed in Canada on August 19, 2022
Fit perfectly on my 22 road glide special
A.S.C. McAllen
Reviewed in the United States on December 4, 2022
Order arrived early and easy to in stall. Quality product, comfortable and a great look to your bike.
Mathew Dalke
Reviewed in the United States on August 7, 2021
Overall the bars look good, however, they are definitely not plug and play as advertised to be. When I was to the point of installing the controls the holes for the pins were not there. No portion of the instructions said this also the videos on YouTube for installation didn't mention this. It is a good thing I have tools and decent mechanical skills otherwise I wouldn't have been able to accomplish the installation. Also be damn sure if you buy these for yourself get longer front brake lines and clutch hydro lines or cables. 14 inch of rise I barely had enough to reattach the brake and clutch controls
Josh
Reviewed in the United States on July 18, 2021
I was very intimidated in doing handlebars, I’ve only ridden cruisers for a month. I had to reroute the brake and clutch cables and knock down the pin at the base of the handlebars. The review that shows they were offset is 100% accurate. Tap down the pin and you can adjust them to the left a bit. I struggled getting the wires ran, then I tapped a hole in the bottom and the throttle cable pulled through fine. Took about 5 hrs total, and I’ve never worked on a Harley or a cruiser.
Mark Hedstrom
Reviewed in the United States on August 2, 2020
I like them a lot. Only thing I’d change is gone to 16”. Im 5’11” Have a bad rotator on left arm so was too apprehensive to go that high. Wish I would have tho
Customer
Reviewed in the United States on April 20, 2020
These bars are awesome. We took the extra time to wrap our throttle cable well and super tight with electrical tape... took us a total of about 5 minutes to slowly and carefully work it through the bars. It does not pull through with ease but prepping well made it not bad at all.
Recommended Products