Your cart is empty.
Your cart is empty.Product Description
ZFE is a company which provides car parts tool, such as polishing pad and buffing machine.
High quality
The sponge material of the hub is dense and has high resilience after stretching.
Products include: 3 polishing cones + 6 mini polishing cones
Cone Shape
Unlike traditional pads, the pads use a system of precision, laser cut distribute the right amount of product throughout the pad, provide 100% coverage on flat or rounded/angled surface.
Size
Dimensions: 6mm(shank diameter), 55mm(handle length)
Color: Yellow(Hard),Orange(Medium ), Blue(Soft)
Material
Carefully selected polyester sponge made in Europe, high density and good elasticity, can achieve better polishing effect.
Withstand high-temperature and repeatedly water wash.
Washable
The sponge of the polishing cone can be washed and reused.
Widely Application
Professional wheel polishing, wheel polishing sponge, electric drill polishing sponge, polishing cars, motorcycles, ships, etc.-used with electric drill.
Easy Installation
It can be used by connecting it to the electric drill connector.
Detailing Cleaning
Clean and polish the edges of windows.
Widely Application
Professional wheel polishing, wheel polishing sponge, electric drill polishing sponge, polishing cars, motorcycles, ships, etc.-used with electric drill.
Step 1
When you find the suitable electric switch, twist the opening.
Step 2
Find the required polishing cone, align the bayonet, and install it.
Step 3
Tighten the polishing cone to the electric rotation, and then turn to the left to tighten the electric rotation.
Step 4
Plug in the power supply, press the switch button on the electric switch, you can directly polish the parts you need.
Randy Pierce
Reviewed in the United States on December 4, 2024
Polishing wheels for aluminum wheels very good product. Very happy with it. Does an excellent job.
Fred P.
Reviewed in the United States on December 15, 2024
Helped me polish my wheels.
Judy Bain
Reviewed in the United States on October 13, 2024
I used these to attach to my drill for polishing aluminum wheels. Product worked great. They held up well.
Nate
Reviewed in the United States on October 12, 2024
Used these to detail my wheels. Worked ok and like that they have plastic frame that won’t dent or scratch. However these didn’t quite do the job I thought they would and are essentially single use. Maybe my expectations were too high.
Oren V. Torres
Reviewed in the United States on November 18, 2023
It works great but doesn't last It wore out pretty quick
Peter Yo
Reviewed in Canada on November 10, 2023
They don't last long at 22,000 rpm.
goose
Reviewed in the United States on April 11, 2023
I love these.They get into the hard to reach areas of the things I'm cleaning like Motorcycle wheels, aluminum engine components, etc... It's a great set to have and I'll definitely get another one. Just spend the time to clean them off when done and they'll last a while before you need more.
joseph papa
Reviewed in the United States on September 10, 2020
Bought these to get into small spaces on a motorcycle and a mountain bike. Both have bare aluminum that needed to be polished.I have used every polish and tool imaginable. 9 inch airway pads, with solid polish, mothers powerball, DA, variable speed pads made of wool, foam, etc.The small yellow cone in a dremel with flexible extension shaft and flitz polish (my least favorite) allowed me to polish my entire mountain bike frame in under 20 minutes. I have never been able to accomplish this in so little time and I even was able to reach the spots I normally can't unless I take parts off.I don't know why they work so well but they absolutely put everything else I've tried to complete shame. I will never buy another mother's powerball or cone again.FYI my dremel is variable speed and I kept the speed around 1/3 - 1/2 while polishing. I would turn it down to the slowest speed before lifting off the surface as the dremel speeds up quite a bit with no load.
Customer
Reviewed in the United States on March 12, 2018
These aren't the same quality as an expensive Powercone and the different color foams don't seem to have the same varying degrees of density as you might expect (IE orange for cutting, blue polishing, etc.), but for the price they work okay. I you use them like me - in small places (in my case, my unpainted, polished alloy wheels that I stripped the clear coat off and just use metal polish on), so the surface area is small and slightly tough on sponges - in between the spokes are edges with some definition (not sharp, but not friendly to rotating sponges. So I expect them to get shredded rather easily. So while I used a Powercone the first time I polished my wheels after stripping them, I use these for maintenance, and so far they've I've done four wheels with them (about 3 hours total) and they don't look too worn or shredded, and they washed up nicely without falling apart.If you bought these to do your entire painted exterior of your car - you bought the wrong item - these aren't designed for that.
Chris K.
Reviewed in the United Kingdom on June 18, 2016
Brilliant purchase from ZFE, love these for using in my drill and to apply polish to freshly refurbed Alloy Wheels - gets in all the nooks and crannies!Haven't disintegrated or shown any wear after use on two wheels and that is only the first of the 3 supplied in the pack, very happy!
Recommended Products