Your cart is empty.
Your cart is empty.Product Description
0
From the Manufacturer
Designed exclusively for Peerless faucets.
carl albrecht
Reviewed in the United States on March 19, 2025
fit perfect
T-Rex
Reviewed in the United States on February 18, 2025
Exactly what I needed and it works perfectly.
sd
Reviewed in the United States on September 21, 2024
Product fit and worked well.
SocalDancer
Reviewed in the United States on December 5, 2024
The middle shaft of my Peerless faucet was spouting a leak, but these O-rings and such fixed it up completely! No need to call a plumber or replace the faucet. Installation was super easy. I didn’t even realize I could buy these on Amazon. Please first refer to your Peerless faucet booklet to determine which group of parts you will need. You can also look up your faucet online and get that information.
Winz
Reviewed in the United States on February 12, 2022
Quality appeared to be good. When I removed the spout My Peerless faucet had 3 o-rings and 1 white bushing. So I was 1 short and faucet still leaked. So contacted Peerless and they sent a new faucet FREE of charge.
Dir Ops
Reviewed in Canada on March 3, 2021
Good delivery, fits perfectly. Thanks
DennisMH
Reviewed in the United States on January 25, 2021
The time to remove the spout, remove old hardware, and replace with the items in this kit took about 5 minutes. I have the Peerless faucet #P99568LF / P99578LF, faucet code 413763-A (faucet code is located on the backside of the escutcheon.However, since it was apart, I decided to cleanup the oring grooves, descale, and shine it up a bit. Add 15 minutes.I also used plumbers silicone grease on the orings. This isn't mentioned in the instructions, but it's just a common practice for me when working with o-rings, and plus I have a small tub of it in my garage and need to use it up.
Jessica H
Reviewed in the United States on May 23, 2019
All parts worked very well. They stopped the leak and with Amazon Prime I got them the next day. Parts may look too small but they expand when you install them. Make sure you don't skimp on the silicone grease (not included). Grease everything really well because when you go to press the faucet back down, with the new o-rings, you are really going to work at it. That took some time before I could get it down enough to tighten the bonnet.
J. Snyder
Reviewed in the United States on January 18, 2018
These parts fixed the leaking spout, but be aware that the parts diagram from Peerless shows them in the wrong order. (No documentation is provided with this kit -- I downloaded the docs from the Peerless website.)The original parts were so damaged when I took it apart that it wasn't clear how it was assembled. After assembling it per the Peerless 88662 documentation, it wasn't right. The correct order from top to bottom is: white bushing, then 2 O-rings. Use an appropriate grease/lubricant during assembly to prevent the O-rings from binding.
Recommended Products
