Your cart is empty.
Your cart is empty.Loom Kit; 7-9 mm; Incl. 2-4 Hole Wire Looms/6-2 Hole Looms/2-4 Hole Wire Separators/2-2 Hole Separators/ 2 Right And 2 Left Side Chrome Plated Brackets; Black;
Mike Lane
Reviewed in the United States on November 2, 2024
Fit perfect on the vortec heads
Michael
Reviewed in the United States on March 13, 2023
Easy to install....durability yet to be determined since just installed.
Carlos E. Gomez C.
Reviewed in the United States on September 10, 2022
Excelente producto, muy buena calidad, facil de instalar. Vendedor 100% recomendable.
Agostino Battisti
Reviewed in Canada on December 7, 2022
I like very much did the job perfect fit
Daniel
Reviewed in the United States on September 21, 2021
I have a 1990 Chevy C1500 with the 350 block. Wire looms could not be installed as shown on the picture (basically both brackets having the upper wire looms toward the firewall). The back bracket would have hit the wire harness on the driver side bank and the coolant hose on the passenger bank. I worked around that, see pictures. Also between cylinders 2-4 you have a pipe going to the air filter that draws some hot air from exhaust manifold during engine warm up and I had to bend the bracket and use only one of the looms. See pictures. It is way better then before but just wanted to say: It’s not plug and play. You have to be creative.
Jay
Reviewed in the United States on August 22, 2021
I wouldn't even consider these to be generic dividers for the specified engines. You'd have to do some cutting, bending, and other modifying to get these to actually fit and once you get them to fit they're still going to look like basic stock dividers just with unnecessary steps.Do yourself a favor and buy something like the Spectre Performance 18483 dividers. They have a much better well thought out universal design. I don't care much for the mirror finish (if you like flashy it's perfect), but they are fantastic for keeping the wires away from the manifolds/headers and holds them in very tidy straight lines. They go on much easier, are cheaper, and the quality is no worse than these.
tanner crews
Reviewed in the United States on August 14, 2021
Easy to mount, looks good, keeps the spark plug wires neat, out of the way of the exhaust manifold, and organized. One thing to mention to beware of is you have to move/bend the dip stick bracket to install them. But they work as advertised.
Scott
Reviewed in Canada on July 6, 2020
Had to Grind down to clear the headers. Other then that worked great!
Jon
Reviewed in the United States on August 3, 2018
Looks great on the car. I had to grind a little off the bottom of the brackets to fit but you usually have to do a little bit of modification to parts that are for many different applications. Would buy again if needed.
Scooter G
Reviewed in the United States on January 6, 2013
More my oversight than manufacturers fault but won't fit my 1988 C4 Corvette (standard 5.7ltr sbc with center bolt valve covers) fitted with headers with one piece header flanges. Flanges are too high interfering with cylinder head mounting brackets that attach just between the exhaust ports.Probably not an issue with headers with cut flanges between the pipes.Other than that they are well finished and look great (in the packet)
Recommended Products
