Your cart is empty.
Your cart is empty.Product Description
The Hitachi 302691 Rip Guide is a parallel guide that fits Hitachi circular saw models C7SB, C7BD, C7SBD, C7SBYA, C7SBSC, C7UR and C8. The rip guide is easy to use. Simply set the rip guide at the desired distance from the blade, then insert the rip guide through slots at front of shoe. Rip guide includes the screw with knob. Nothing else is needed except wood. The Hitachi 302691 Rip Guide is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 30-days from the original purchase date. Every Hitachi accessory is designed to the highest standards and is rigorously tested for both performance and durability. Since its inception, Hitachi has pioneered innovative technologies that have improved the quality of craftsmanship worldwide. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.
From the Manufacturer
The Hitachi 302691 Rip Guide is a parallel guide that fits Hitachi circular saw models C7SB, C7BD, C7SBD, C7SBYA, C7SBSC and C8. The rip guide is easy to use. Simply set the rip guide at the desired distance from the blade, then insert the rip guide through slots at front of shoe. Rip guide includes the screw with knob. Nothing else is needed except wood. The Hitachi 302691 Rip Guide is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 30-days from the original purchase date. Every Hitachi accessory is designed to the highest standards and is rigorously tested for both performance and durability. Since its inception, Hitachi has pioneered innovative technologies that have improved the quality of craftsmanship worldwide. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.
Thomas N.
Reviewed in the United States on February 24, 2024
Simple device work as it should.
ALEX
Reviewed in Canada on December 17, 2024
fit my milwaulkee 6 1/2 M18 FUEL circular saw very good ---less than a 1/16 inch of rattle --- included screw dont fit ... a few inches longer and half the price --- verrry happy
MB
Reviewed in the United States on January 25, 2024
This rip guide does what I expect it to do. It fairly keeps the saw on track for a reasonably accurate cut.
Lester Whitacre
Reviewed in the United States on December 26, 2023
It fits the rip fence tabs in my Hitachi Saw case.My only disappointment is the price.
covanna
Reviewed in Canada on July 12, 2021
The guide fits the Hitachi saw perfectly. Included sprung nut ( bolt, screw ) to hold guide in place fit correctly. Good addition to saw. Would be better if it was a bit longer but fine all the same.
Ramiro Negas
Reviewed in Mexico on May 10, 2021
buen producto, calza a la perfección para lo que dice que fue hecha.
JBA
Reviewed in the United States on August 20, 2020
I bought this to go with my Metabo circular saw. I used this to rip some Trex decking instead of setting up and using the table saw. It allowed for a nice clean, straight cut. Can't have a circular saw without having a rip guide available.
Le
Reviewed in the United States on October 15, 2020
Our local schools are online-only for a few months due to the coronavirus. Having dedicated work spaces is better for learning and noise levels but we didn't have enough desks. I was able to use this to rip off the rounded edges on some deck board cutoffs. Having a square edge allows the boards to meet and create smooth top surface.The end of the cut is not guided so if I were to do it again, I'd measure an extra 6 inches to allow for cutting off the non-perfect edge.
diego
Reviewed in Mexico on September 29, 2019
es muy necesario para la sierra este accesorio lo unico que no veo muy practico es el reducido tamaño que tiene tanto del soporte guia como de la longitud de la regla pero para hacer cortes longitudinales, repetidos y de poco grosor sirve muy bien solo hay que tener cuidado cuando la sierra sale del corte para no desviarse
Janis
Reviewed in the United Kingdom on November 13, 2019
Just perfect!
jim brown
Reviewed in the United States on September 13, 2016
Nothing special, in fact I have working as a carpenter for 50 years and have purchased several circular saws over that time period and this is the first time buying a circular saw that did not come with a rip guide, found it unusual. I like the saw itself and find Hitachi tools to be of good quality.
Silver Streak
Reviewed in the United States on August 5, 2015
Does exactly as it is supposed to do, guide the saw down the board. Works great, too bad it does not fit the indent in the hard case made for the circular saw.Also customer service is non existent, I emailed Ryobi to let them know and get the spring for the lock screw was missing, and never got a response period. I went to the hardware store and found a spring that would work. The spring is necessary to keep the lock screw from vibrating out of the saw while not using the guide.I purchased a Ryobi circular saw at the same time, the saw is great worked flawlessly, The products are great, just don't expect a response from Ryobi.
NvTG
Reviewed in the United States on March 7, 2012
I got this to help cut 1 1/4 inch off of a 4 1/4 inch baseboard. It worked well and provided for a pretty straight line all things considered. It is strong and holds well along the material you are using as a guide. There is already a retention space in the factory saw case for it too which is really nice for storage. The only cons in my book are that the slot it slides into on the saw base is a fixed angle which I'm not entirely sure is square. Additionally the end that rides along the material was not square to the shaft. I had to put it in a bench vise and bend it to eye square. One thing it looks like you could do since there are 2 holes in the guide end is attach a longer squared strip or 2 vertical strips etc. It probably should have come with the saw but I understand they can't include every bell and whistle and keep things affordable. For the price and the fact that there is already a space in the case this accessory is a must have for anybody with a compatible saw model.
Recommended Products
$77.66
$ 35 .99 $35.99