Your cart is empty.
Your cart is empty.Product Description
M-D door bottom, u-shape, series: Ultra, 1-3/4 in width, 36 in length, White, UL listed, ADA approved, with vinyl insert, dry cap. Energy loss through the bottom of doors can be minimized with the installation of a door bottom in conjunction with your smooth top threshold. This combination provides a weatherproof seal between the bottom of the door and the top of the threshold. Drip caps also provide your exposed entry ways protection by diverting water away from the door bottom and thresholds. M-D Building Products offers multiple combinations of new and replacement door bottoms and drip caps that will fit most entry doors.
From the Manufacturer
Aluminum drip caps from M-D Building Products divert rainwater away from the bottom of your door. Slotted holes allow for easy adjustment.
littledidiknow
Reviewed in the United States on August 10, 2024
My opening was only 31” so I took some off both edges so the screw holes were equal all the way across. This looks like it will keep the rain from coming in.
Ronnie R
Reviewed in the United States on June 29, 2024
Extruded ‘drip cap’ is solid aluminum.I installed mine over the window in a food concession trailer to keep rain out of the hinges.Worked perfect 👍🏼RRR
BL
Reviewed in the United States on December 4, 2024
I bought this one, as it had a little brace in case someone kicked it. It went on well, but I didn't have to cut a few inches off for my door.
Thomas W. Blanck
Reviewed in the United States on December 27, 2024
This was easy to install on outside on exterior door. Hoping this will direct rain away from bottom of door and prevent threshold from rotting.
Ryan J Pfannmuller
Reviewed in Canada on August 3, 2023
Well built and easy to install.
Jack‒retired tech geek extraordinaire
Reviewed in the United States on July 9, 2023
Well made of sturdy aluminum. Requires cutting to fit most doors. A Dremel with a Cut-off wheel for metal works nicely.Applying calk to the back when mounting ensures a watertight seal. My preference is DAP Dynaflex, as it's more durable than other forms of calk, including 100% silicone. After years of trying this kind or that, Dynaflex is now the only kind of calk I ever buy–period. Also, when using any sort of sealant/calk/etc, ensure the surfaces are very clean. Isopropyl alcohol is preferred, as it cleans well and leaves no residue, unlike many common household cleaners.When mounting, ensure there is clearance wherever the door will swing. You might want to use a couple small strips of duck tape to hold it in place until it's permanently attached.There was a big thunderstorm here today. Not a single drop made it inside the front door. YAY!!!
Amron
Reviewed in Canada on May 27, 2023
The product is very well made and very sturdy.
matthew bowler
Reviewed in the United States on November 7, 2023
This works great. I used to get water through my doors threshold. I didn't want to get a storm door, so I got this instead. Easy.
David Helmers
Reviewed in the United States on January 3, 2023
It was sturdy, but the sharp edge is much to be desired. I included all of the order in this shipment and it's good as new. Didn't modify a thing. 3 pcs. shipped back for full refund.
Shelly Davidson
Reviewed in Canada on January 12, 2023
M-D protects keep the weather out of you house.
Tee
Reviewed in Canada on September 30, 2022
We have a wrap around deck along our home,. We installed it along the side/on the deck of our home. Turns out pretty decent. Hopefullly it will veer away the water..
Vic R.
Reviewed in Canada on September 20, 2022
Worked as expected. I wish I have drilled the holes a small bit higher, I would have saved myself some sanding of the threashold. Over all it is a sturdy drip cap and looks like it will last a long time.
DJ
Reviewed in the United States on September 3, 2020
I was initially disappointed with the finish on the door bottom, with an uneven look, some areas appearing to be darker than others. I needed to mount right away, so I used as it was. Mounting was much slower than expected, since you have to allow for the hidden brace that goes behind the bottom. If you mount with the door bottom too near the floor, the brace will drag on the sill as it opens. I had to use some shims to lift up and avoid this. But - final result is very satisfactory and I have a nice looking fixture instead of a metal door starting to rust. Nice blend with the satin nickel door hardware.
Recommended Products
$23.19
$ 11 .99 $11.99