Your cart is empty.
Your cart is empty.We all know that the Madd Gear Drift Trike provides hours of awesome drifting action and fun! Eventually you are going to need to swap out those fat tread rear wheels for a fresh set! We have you covered with easy to install replacement rear wheels set. Set comes with 2 Blow Molded Wheels and Axle Spacers. These Wheels Measure: 6" Wide by 8 1/4" in Diameter - Supplied spacers allow for these wheels to be used on various other trikes.
Sean
Reviewed in the United States on March 11, 2025
Parts fit, but all of the hardware is not there. You have to drill out the bushings to fit the Green Machine. I found that the diameter of the bushing is smaller than the rod and has to be drilled. Wheel spacing is also an issue and you have to find shims or washers to make sure it has no side to side movement.
Peggy Breitner
Reviewed in the United States on March 10, 2025
These are for a child's drift trike. It did not state that when I ordered them. My husband's trike is for an adult and has bearings. These do not have bearings. I explained that in my email to their customer service, and they said they'd take them back if I paid shipping to return them. They wanted $25.00 to return them for the shipping cost. What a rip-off. So, I kept them, and we had to throw them away. Their customer service was not timely. It took a couple of days just to get them to respond to my email.
patricia alfrey
Reviewed in the United States on February 25, 2025
Liked it was exactly as ordered and received on time.
kathy
Reviewed in the United States on May 28, 2024
I have several "big wheels trikes/bikes" for my kids/grandkids and greats so these replacement wheels work out great. The older ones really like to drift.
Edward
Reviewed in the United Kingdom on June 1, 2023
The Wheels are smaller than the original 10" rears that were on the green machine (18" front) but as long as you remove the old wheels and spacers and use the two new spacers that were also provided with these new Madd Gear wheels they fit brilliantly. If you lose / cant find the spacers it would be possible to incorporate lots of washers to fill the gap... Very Happy Boy.
Josh
Reviewed in the United States on May 8, 2023
The wheels themselves are the same width as the green machine maybe an 1/8” shorter height wise. The spacers were required to make the axles fit properly again. Necessary to modify spacers which was easy to do. Used my dremel and a file and Banda bing bass boom they Green Machine was back in business. If I get a chance I will add pictures.Only issue and it’s not a quality issue is we are missing the green hub caps that were supposed to come with the wheels otherwise great product.
Jeremy H.
Reviewed in the United States on August 13, 2022
When I pulled them out I thought they were a perfect match. But when I went to put them on the green machine found that the center of the wheel was narrower than the axel and had to use the spacers. I hope this does not end in bent axel. They seam to be wobbly on the axel. This all being said my son is so happy to be back on his spin out bike.
Jackie Byrd
Reviewed in the United States on January 3, 2022
Good product
Jenna
Reviewed in the United Kingdom on July 12, 2019
Arrived quicker than expected my little boy was so happy he could go on his trike again
Dave
Reviewed in the United States on May 8, 2019
This product isn't a direct replacement for Green Machine wheels but these will work if you are willing to also buy some washers. I used several regular washers and a few fender washers to get a good fit on my Green Machine. If you are planning on using this wheel on a Green Machine I suggest you go down to your local Ace Hardware and get about 30 of the proper diameter regular washers and 5 fender washers and you can return the ones you don't use. I believe I used about 25 washers total but wound up making two trips to the hardware store because I didn't buy enough the first time I went. If installing on a Green Machine don't forget to get a few fender washers or you will not be able to get this attached properly and may cause premature wear on the wheel or not be able to get it to work at all so make sure you get fender washers as well as regular washers to get a good fitment.
Dean white
Reviewed in the United Kingdom on October 3, 2019
Wrong size needed next ones up
Recommended Products
