Your cart is empty.
Your cart is empty.Product Description
Mark Critelli
Reviewed in the United States on February 28, 2025
You get everything as mentioned in the description and installing it is fairly easy and it is quite comfortable much better than the original default part that comes with the Meta Quest so using this is definitely improvement, I definitely recommend
vinwimm
Reviewed in the United States on January 16, 2025
I found the slim face pad with the light blocking pads to be very comfortable and it gets you closer to the lens, so I noticed a difference in fov. But your eye lashes might touch the lens depending on how tight you like your head strap
Bryan
Reviewed in Canada on June 25, 2024
The stock facial interface's silicone cover was worn out and kept falling off whenever I used the Quest 2. I ordered this and was pleasantly surprised by how well it worked at feeling comfortable and also does an amazing job of blocking out light. I had an older version of the AMVR cover and it was not that good. The PU leather feels premium and is a must-have for me.
Cindy
Reviewed in Australia on August 19, 2023
This has dramatically increased the comfort level of our Quest 2. The padding is soft and comfortable. The side inserts are fantastic for slightly more narrow faces, and they can be adjusted accordingly. The nose guard is awesome and actually stops fogging considerably. Easy to install and easy to follow instructions included. I would highly recommend this product.
Nick heida
Reviewed in the Netherlands on October 21, 2023
Is goed product zit lekker en komt geen licht doorheen
Alessandro Vannetti
Reviewed in Italy on June 1, 2022
É un ottimo prodotto non ascoltate pareri superficiali: non é affatto vero che trapela la luce, se la cover é messa bene non si deve vedere il bordo arancione ma solo la pu nera. Trovo il prodotto molto comodo e non fa appannare le lenti neanche d'estate. La soluzione migliore di tutte, sia rispetto alla spugna di serie che rispetto alle cover in silicone, che aumentano sudorazione e nebbia (testato qui invece 0 nebbia anche con hannibal e 40 gradi). Prezzo adeguato rispetto a quantitá e qualitá accessori. Prendete queste se volete un'alternativa a quella originale, evitare il silicone.
H
Reviewed in the United States on July 28, 2021
The first time I put on my headset with this thing installed, I immediately had to take it off because the stink of offgassing plastic was overpowering. My nose still feels weird.Otherwise, the silicone light blocking doodad isn't very effective. The velcro is weak and doesn't grab onto the face pads all the way around. If you use the little wedges, this problem is exacerbated because the face pads are only attached to about half as much velcro. And worst of all, my glasses don't fit any better than they did on the original facial interface. I have one of these for my old Rift, and it was quite a lot better.EDIT: Upgraded from 2 to 4 stars. The stink wore off after being left out for a couple of days. The silicone nose thing is actually quite effective. It's much thinner than the one on my Rift's AMVR face pad, so it's far more comfortable and doesn't restrict breathing by pinching your nose.The white plastic lets a lot of light through, particularly under bright direct light. It's not terrible, but a little annoying. The face pad collapsed/flattened very quickly, so it's not as thick as it was when it was new. It's usable, but less cushy. This also happened with the one on my Rift.Another edit: Now that I've FINALLY received my silicone cover from Oculus, I can say that this is much more comfortable. It has much more padding. However, if you're a light VR gamer, just go and request one of the face covers from Oculus (it's free). This isn't worth the money if you don't wear your Quest 2 frequently or for extended periods.Another issue with this face pad is that it doesn't absorb sweat like the original foam pad does. This is a good thing for hygiene, but with this face pad, it all runs down to the ends of the cushion next to your nose. This gets irritating quite quickly. The vents don't seem to help much in preventing moisture from building up inside the headset.
RegularDude
Reviewed in Germany on May 9, 2021
Hierbei handelt sich um eine "neue" Version mit besseren Farben für die Halterung. Der Vorgänger hatte eine orangene Farbe die Licht durchgelassen hat.Ich habe es mir in schwarz geholt und kann bestätigen, dass dieses Problem nicht mehr besteht und damit ist es jetzt das perfekte Gesichtspolster für mich.Geändert wurde nur die Farbe ansonsten ist alles genau gleich geblieben.Es kommen 2 Polster, eins dicker und eins dünner. Beide Polster sind bequem und fühlen sich gut an. Das dickere ist nochmal extra bequemer und das dünnere gibt eine bessere Sicht da man damit näher an den Linsen ist.Sowohl Polster als auch Halterung lassen sehr gut Luft durch was verhindert das Linsen anschlagen oder man stark schwitzt, sehr zu empfehlen wer Sport in VR treibt.Das Nasenstück lässt kein Licht durch außerdem wird es stabil an der Halterung befestigt und kann somit nicht verrutschen.Die Installation ist Kinderleicht: Altes Polster raus, Nasenstück an die Halterung anbringen, neue Halterung an die Brille anbringen und Polster auf die Halterung legen(Klettverschluss).Die Halterung passt perfekt rein und hält sogar besser fest als das was mit der Quest 2 kommt.Ich bin sehr zufrieden daher eine klare Kaufempfehlung.
well-read and still learning
Reviewed in the United States on February 1, 2021
If you wear glasses with the Quest 2, this is the best option for a facial interface that is easy to wipe down and doesn't get soaked with sweat while playing. There are two thickness options, and both work with glasses on. I prefer the thinner pad option because it makes the fit feel more secure, but the thicker one (pictured) is really comfortable as well.I've seen some reviews where people say it doesn't fit well and I personally don't get it. The padding is mounted with velcro and comes with side "wings" which are just extra padding. You can adjust the pads until it's comfortable. For example, I originally tried the thicker pad with no side wings, but I found light leakage where my glasses were. So I added the side wings, but it took a couple tries to get it just right so there was no leakage and I could put the headset on and off without my glasses sticking inside. I did tje same thing with the thinner pad and now it's perfect (for me).I only have one issue that I wish AMVR would adress - the orange inside the facial mount. At certain lighting, it's noticeable and distracting. I used electrical tape on the sides to fix it, but I wish AMVR would fix this issue some way.All things considered, this is the best interface I've found for glasses wearers like me.
Rob
Reviewed in the United States on January 26, 2021
Made the quest 2 feel comfortable on my face. It works amazing with glasses. You can adjust the vertical and horizontal width when applying the foam. I use with thr glasses spacer and amvr lens extenders (plastic rings that prevent glasses from getting near the vr lenses).No light bleed, no fogging, vented, and the plastic fits into quest 2 like original. Best thing is it no longer squeezes my glasses and it actually makes the quest feel lighter. I am so impressed with this that if I continue to use vr a lot I will buy a spare.Whoever designs quest 3 face plate needs to take note. The original occulus mask is horrible and it squeezes your face and gives headaches. This one is on point. Good job.5 stars for comfort5 stars for extras it comes with adjuster pads (I didn't need guess I got a wide face?) 2 face pads, plastic mount that replaces the occulus one. Oh and as a bonus lens gaurd cover for when you aren't using the quest.
Recommended Products
$24.99
$ 11 .99 $11.99