Shopping Cart

Your cart is empty.

Your cart is empty.

Luney Fuel Injector Tester and Cleaner Tool Kit & 2 Size Adapters, 4 Pulse Modes DIY Cleaning Tool Kit with 40' Power Cord for Automotive Diesel Motorcycle

Free shipping on orders over $29.99

$17.99

$ 7 .99 $7.99

In Stock

About this item

  • 【What You Will Get? 】Components included in the fuel injector tester and cleaning tools kit: 1 CNBJ-20 motorcycle fuel injector cleaner machine; 2 injector adapters (different sizes); 1 black storage box with zipper; 1 Chinese and English instruction manual
  • 【Working Principle and Function】 The fuel injector tester and cleaner kit can help you diagnose injector problems, you can test the injectors one by one to help confirm fuel delivery problems such as stalling, leaking, burned out or damaged, to find out the problem and solve the crisis in time to protect personal safety
  • 【4 Pulse Modes and Clear Display】The diesel fuel injector tester kit has 4 pulse signal output modes, i.e. single pulse/short pulse/long pulse/continuous pulse 4 driving modes. Continuous mode can recognize the injector's good or bad condition when the engine is turned off, and the mode locking function achieves the consistency when testing the injector. Users can choose any mode according to their needs. At the same time with a clear display allows you to clearly see the mode, allowing you to more accurately and quickly detect the fuel delivery problems of automotive injectors and timely maintenance
  • 【Power Supply Mode】The fuel injection systems cleaners tools kit is using the vehicle's 12V car battery as the power supply, this instrument can be used with any fuel pressure tester. Special Note: This fuel pressure tester kit is only applicable to gasoline vehicles, please do not use for oil extraction engine and except 12V voltage car battery, otherwise it will cause damage to this equipment
  • 【Universal Adapter and Power Cord】The fuel system cleaner for gasoline engines comes with two sizes of adapters (one large and one small), which are compatible with most 12V EFI and GDI car injectors. The tester power cord is made of excellent quality silicone, high and low temperature resistance; the power cord is 40 inches long with a wide working range, very convenient for testing



Product Description

Product Description:

Product Description:

  1. Luney fuel injector tester kit can help diagnose injector problems and can test injectors one by one to help confirm stalled/leaking/fired out conditions.
  2. Fuel pressure tester kit has 4 pulse signal output modes, and the user can choose any one as needed. Using the vehicle's 12V car battery as the power source, the continuous operation mode can identify injectors while the engine is off. The mode lock function defends consistency when testing fuel injectors.

Attention:

  1. Automotive fuel injector cleaning kit is only suitable for gasoline engines, not for diesel engines.
  2. Fuel injector tester and cleaning tools kit can be used with any fuel pressure tester.
  3. Short-circuit protection: When the injector is damaged or the pulse output is short-circuited, the power indicator light will flash to indicate.
  4. Cleaning: Carburetor cleaner/injector sprayer and 12V DC battery power supply need to be prepared in advance additionally.

Electrical Specifications:

Name: Luney Fuel Injector Tester
Power Supply: 12V battery / DC 12V (recommended 2A) power adapter
Working Condition: 0℃-40℃; Relative humidity ≤80%.
Size: 4.9*2.8*1 IN (main part)
Package Includes: 1 × car fuel injector tester; 2 × fuel injector adapters (different sizes); 1 × black storage box with zipper; 1 × copy of Chinese and English instructions
Material: ABS
Storage Condition: -20℃-50℃; Relative humidity ≤85%
Weight: 10.6 OZ

Applicable Scenarios

1

Injector Stuck, Blocked, Leaked or Burnt-Out

2

Incomplete Fuel Combustion

3

Engine Idling Instability and Start Difficulty

4

Weak Vehicle Acceleration and Slow Car Movement

Operating Instructions:

Operating Instructions:

  1. Turn off the engine of the car.
  2. De-plug the wires of the injector of the car to be measured, and then connect the two pulse output terminals of the instrument with the injector of the car.
  3. Connect the red clip of the instrument to the positive pole of the 12V car battery and the black clip of the instrument to the negative pole of the car battery.
  4. Press “MODE SET” to select the desired pulse signal output mode. The screen will display the currently selected mode.
  5. After selecting the desired pulse signal output mode, press the “PLUSE” key, the instrument will output pulses to the injector to be tested. The output pulse signal indicator lights up.
  6. After the test is completed, if you need to repeat the test, press the “PLUSE” key again; If you want to change the pulse mode, press the “RESET” key to select the desired mode, and then test the automobile injector again.
Different Modes Are Explained In Detail:

Different Modes Are Explained In Detail:

  • Mode “1”: Single pulse mode. In this mode, when the “PLUSE” key is pressed, the instrument will send out a pulse with a width of about 255 ms.
  • Mode “2”: Short pulse mode. In this mode, when the “PLUSE” key is pressed, the instrument will emit 50 pulses with a pulse width of approximately 7 milliseconds.
  • Mode “3”: Long pulse mode. In this mode, when the “PLUSE” key is pressed, the instrument will emit 100 pulses with a pulse width of approximately 3.5 milliseconds.
  • Mode “4”: Continuous pulse mode. In this mode, when the “PLUSE” key is pressed, the instrument will continuously output pulses at a rate of approximately 50 pulses per 1450 ms. The pulse rate is about 50 pulses every 1450 ms. The pulse width is about 7 ms.
  • Pressing the “PLUSE” key again will terminate the pulse output.

NOTE:

  1. Always turn off the car engine before using this instrument.
  2. Do not smoke/ignite close to the car.
  3. Do not spill automobile fuel on hot engine parts.
  4. Use this instrument only in a ventilated area, and do not inhale exhaust fumes from automobiles or vapors from flying fuel.
  5. Do not get close to the rotating/moving parts of any automobile, and do not touch the hot parts of any automobile.
  6. Do not short-circuit the positive and negative terminals of the car battery.
  7. Do not touch any automobile parts with dangerous voltages.
  8. Always observe the warnings/cautions/related maintenance instructions in the vehicle maintenance manual.
  9. Wear qualified goggles.
  10. All disconnected car connections should be restored correctly after completion of the test.

Tim Chambers
Reviewed in the United States on March 21, 2025
The Luney Fuel Injector Tester and Cleaner Tool Kit is a great investment for anyone looking to clean and test fuel injectors efficiently. It’s well-built, easy to use, and gets the job done without the need for expensive professional services. The cleaning process is straightforward, and the kit includes all the necessary adapters to fit various injectors.The reason I’m giving it 4 stars instead of 5 is that the instructions could be clearer, especially for first-time users. I had to watch a few online videos to fully understand the setup. Also, the pressure gauge could be a bit more precise.Overall, this is a great value tool that works well once you get the hang of it. If you’re comfortable with a bit of trial and error, it’s definitely worth buying!
uncle d
Reviewed in the United States on January 7, 2025
great tool that i didn't know i needed! i used it to clean the injectors out of my car. it was easy to hook up the wires to the injector and the tester worked to activate them. i used a bottle of aerosol intake cleaner from the parts store that kinda fit one of the adapters, but it leaked a fair bit. running the test cycle, i saw the pattern improve a bit.all in all it was pretty quick and easy to use, but i had trouble finding an can of cleaner that fit the adapter properly.
MMO
Reviewed in the United States on January 17, 2025
We got this to be able to diagnose injector problems and it works great. You can test the injectors one at a time to help locate fuel delivery problems like leaking or burned out. It works perfect for what I need.
Will Ramirez
Reviewed in the United States on December 2, 2024
While getting to the injectors on every vehicle isn't always easy, like on my 04 V6 Ford, having an easy tool to use to not only test, but simply open the injector for cleaning is great. It's nice to have something to rule out a problem, instead of just changing a part and hoping, and this does just that!I like that it fits a wide range of injectors, from my Motorcycle to all 3 of the passenger vehicles I have (an inline 4 Yamaha, a V6 Ford, a V6 Suzuki, and a V8 Ford from the 80's) with little to no issues. As I said makes for quick cleaning, and diagnostics.The unit feels like it's built well enough, and should last a while, especially since I won't use it too often and it has worked great so far.Overall I think this would be a great addition to any DIY toolkit.
KCE
Reviewed in the United States on December 10, 2024
This is not a tool you need to use very often it is a great addition for the do-it-yourself person to add to the toolbox when most of the cars now a days have fuel injection. I have not had to use it yet but when this arrived, I noticed that it appears to be sturdy and well-built so it should last awhile. My only concern is the wires do look like they are a little short, but I think we can find a way to work with that so that we will not have a huge bill from the shop, I feel like this is going to very worth the money.
Mikki Miller
Reviewed in the United States on November 3, 2024
The only issue is I wish the leads were a little longer so it did not have to be in my hand because not enough wire to set somewhere. Reads perfect and let me know that there was an issue with one of the injectors. Great price and value
LynLivesHerBestLife
Reviewed in the United States on November 20, 2024
This Fuel Injector Tester and Cleaner Tool Kit is outstanding! It’s a complete solution for testing and cleaning fuel injectors, and the included 2 injector cleaner adapters make the process even easier. The kit is well-built, with high-quality materials that feel durable and reliable. The instructions are clear, and I was able to test and clean my injectors without any hassle.
Ravanja
Reviewed in the United States on October 25, 2024
I have had to deal with contaminated fuel from marinas now several times. It causes all manner of problems and there is next to no way to prove fault. All you can do is repair the damage. Most of the time it's the filters, pre-filters etc that are affected. If things get really bad, it can also work its way to your injectors. Water damage is particularly nasty as it causes rust and flows through filters unless caught in time.Having had to clean all the infectors on an outboard motor induced by such salt water damage in the fuel, I had to use a DC power supply to drive the injectors. Not so bad when you are at home, but sometimes it happens on the water too. This is now part of my tool kit on the boat. Being a liveaboard sailboat means I need to be self sufficient on the water as I may not be anywhere near land.This little device will drive the infectors safely to clean them. If you are desperate, you can go direct to the battery but you also run the risk of destroying the injector.I found blowing the injector backwards to be far more beneficial than forwards. Just make sure the surfaces are clean and use a spray can of cleaner pressed up against the output of the injector. Beware the small fine wire filter may pop out. Usually it doesn't.This injector tester provides all you need to do the job safely and easily. Worked for me and now is a boat tool so I can do it anytime I need to.
Recommended Products

$197.46

$ 91 .99 $91.99

4.4
Select Option