Shopping Cart

Your cart is empty.

Your cart is empty.

LED 3rd Brake Light Assembly High Mount Stop Light Cargo Lamp w/Waterproof Gasket fit for Nissan Titan 2004-2015, fit for Nissan 2005-2016 Frontier 26590-EA800 (Black Housing Smoke Lens)

Free shipping on orders over $29.99

$28.99

$ 14 .99 $14.99

In Stock

About this item

  • 【Compatible Vehicles】LED 3rd Brake Light High mount brake light fits for Nissan Titan 2004-2015, fits for Nissan 2005-2016 Frontier. Replace Number: 26590-EA800
  • 【Tougher & Water Resistance】Heavy-duty housing is made of superior ABS plastic to ensure exceptional weather and impact resistance; Foam padded for stronger water-resistance ,well-Sealed cover prevents rains leaking into the light to ensure afety and performance.
  • 【Unique Design】Plug-n-Play Operation, Uses Existing Bolt Holes for Installation. When the brake is not pressed, the integrated cargo light (if equipped) gives off plenty of white light to view your gear in the truck bed.Energy-saving, low power consumption and low temperature.
  • 【Bright Sparking LEDs】3rd Brake Light comes with the bright light of the LEDs, full LED light source provides additional safety to you and those around you, making it easier to see during braking situations, and lights up faster enough to avoid accident at the rear end.
  • We are always here trying to achieve satisfaction for our customers.



Product Description

LED 3rd brake light

Why LED Third Brake Light

The third brake light helps rear drivers determine if the vehicle in front is braking and take immediate action. Due to its high mounting position, the third brake light is easy to notice. LED Third brake light can improve driving safety and add personality to your vehicle.

Reference Number:

26590-EA800

Fitment:

Compatible with Nissan Titan 2004-2015

Compatible with Nissan Frontier 2005-2016

Light Type:

LED 3rd Brake Light and Cargo Light

Location:

High Mount, Rear

Package included:

1X LED 3rd Brake Light

1X Waterproof foam gasket

third brake light

IP67 Waterproof

  • IP67 waterproof rating ensures that the third brake light works perfectly in any bad weather such as rain, snow and fog.
  • High density foam backing prevents water penetration.
  • Waterproof welding technology to prevent leakage.

cargo light

Easy to Install

  • Plug and play installation. No drilling required.
  • This high mount brake light can be used with factory screws.
  • Hand screw tools are recommended for installation. Electronic tools tend to over-tighten and may cause the housing to crack.

brake light

Bright Sparking LEDs

  • LED car lights, using high quality lamp beads, higher brightness and longer service life.
  • Super bright LEDs make your car visible on dark roads, reduce rear-end accidents and make your driving safer.
  • Personalized LED lights provide a dazzling look and excellent illumination for the back of your car.
waterproof
features
benefits

Customer
Reviewed in the United States on March 13, 2025
Works great. Very bright
Gindi F.
Reviewed in the United States on February 4, 2025
Easy to install and nice bright lights
John E. Williams
Reviewed in the United States on September 10, 2024
This cargo light is so much brighter it lights well past the tail gate of my truck, the brake light portion is also very much brighter than the factory light is, and it’s easy to install, be careful when removing the nuts though don’t drop them you may not find them use a magnet in the socket
Mike C.
Reviewed in Canada on August 8, 2024
Update one week after installation: brake lights no longer turn on when brakes are pressed and caused my traction control light to turn on.Bought this for my 2013 Frontier Pro-4x and it looks great. Two harnesses (one for Frontier, one for Titan) and a foam seal for the new lights were included in package. Cargo lights are super bright, brake lights look much better than OEM.The harnesses to the truck and connecting the positive, negative, and cargo light wires were plug and play, and I used wiring tape to seal them.The fit was mostly good aside from the bolt heads being slightly misaligned with the holes to the truck. Had to force it in as I didn’t want to cut into the truck, which caused a little gap, but the included seal helped with my leaking concerns. Took it to the wash twice and parked in rain with no leaks into the truck.
Duceduce4daUCE
Reviewed in the United States on June 28, 2024
Amazon says it doesnt fit my 2019 frontier SV but it did. Comes with 2 different plugs just in case one doesnt fit. Gasket fit good too and bolts on the light fit the OEM 8mm nuts perfect. Exactly what I wanted and at a good price.
Scalzo
Reviewed in Canada on June 21, 2024
It fit great and sealed well. Instructions are easy however still need to splice the connection. I think it depends on the truck. Mine was a 2011 Titan.
Marcus J.
Reviewed in the United States on May 8, 2023
It works and it looks good. But the fitment isn't the greatest, I'll have to wait and see if there's any water penetration. Also, both the light and wiring harnesses came with female butt connectors, so it is definitely not "plug and play" as claimed
Joey B
Reviewed in the United States on May 6, 2023
Was exactly what I was looking for. Looks great. The only issue I had was the connectors that came with it, (all male plug ends). I had to clip off the 6 male plugs and make the appropriate connections myself, instead of just plug and play.
RPW
Reviewed in the United States on February 5, 2022
My factory unit was damaged and needed to be replaced. The install seemed simple enough and the price was right. However the install did not work because an electronic unit in the engine compartment had malfunctioned. Had to have Nissan install it. The brake lights are great but the cargo light is a disappointment. I had replaced the backup lights with LEDs and they were superlative. Not so with the LEDs for the cargo lights.
lorena vilchis
Reviewed in Mexico on October 22, 2021
muy buen producto
ZaphodBeeblebrox
Reviewed in the United States on July 6, 2020
installation is fairly simple, I had to drill out the screw holes a few mm where the light mounts to the chassis. Comes with a 3M Gasket but i would recommend re-using the oem corner gaskets along with this gasket.The rear cab light is secured to the cab with an adhesive gasket and 2(8mm or 7/16 lock nuts). Access the nuts via concealing tabs on inside cab(opposite side of the light). you're going to want to use an "8mm deep socket" with atleast a 4 inch extension unless you want to remove the entire cab ceiling material.You're going to have to remove the pre-existing gasket/adhesive material, i used soap, water and a rag(wd40 would work to)Other than the fact that i had to drill holes larger and reaching the wiring connect(was a hassle), looks good, works good.Installed to cure parasitic amp draw by shorted oem rearlight assembly.
Robert
Reviewed in Canada on July 27, 2020
Ordered this and it does not appear as the photo.The quality is very questionable as per item described.No chrome...just shinny silver plasticI will be returning
Recommended Products