Your cart is empty.
Your cart is empty.Come with 2 extra spacers ,can use spacers to covert from a double stack to single stack.
IMAPC
Reviewed in the United States on February 8, 2025
These are exactly the same as the BSG Precision Series for little as $10 each compared to $28.99. The only difference is that the BSG has an aluminum decorative panel where this item has a plastic one. They are very good pouches. You can adjust the ride height, pivot and angle for custom positioning.
Customer
Reviewed in the United States on September 22, 2024
These mag holders are vey adjustable, work great, and are quite inexpensive.Installed the included parts to convert to single stack and they work perfectly.
Josue Gonzalez
Reviewed in the United States on July 7, 2024
The actual design and quality of these things are awesome! You can adjust it almost any way you want it, to include the type of mags you’re carrying. BUT!!!!!, the little bracket where your belt feeds in to is small. For example, I used it on my 5.11 tac belt which is 1.75 inches wide, and it was too big to fit inside the little notches/lips (whatever they’re called) of the mounting bracket. So I have to cut the notches a tiny bit wide so the belt could fit perfectly snug and I’d be able to screw it down. After it was done however it turned out to be the best set of mag holders I’ve owned!This item could be a 5/5 stars if the company gave you options for sizes on the belt adapter!
Last Knight
Reviewed in the United States on March 15, 2024
I got these to fit on my current battle belt. They did not fit on the competition belt. Ultimately I had to return them. I do recommend getting the whole setup from Krydex. Just to make sure it all fits correctly inappropriately. I can recommend this product! It just did not work out for me. My belt was too thick for the mag holders to fit.
Skip
Reviewed in the United States on November 28, 2024
Works fine, but installing on the belt is a little nuts, if the screws that go through for the belt support were on the back side, it would be so much easier to put them on the belt. I mean so much easier. As it is, you have to either spin the holder back and forth to reach all the screws or disassemble the holder from the belt attachment. Black Scorpion does the stupid stuff, and it's such an easy thing for them to fix. Would have been 3 stars, but the price is unbeatable.
Tito
Reviewed in the United States on October 10, 2024
"Budget-Friendly Magazine Holsters Deliver Solid Performance"These magazine holsters offer good value for money, providing functional storage for your magazines at a fraction of the cost of premium brands. While they may lack some refinements, they fulfill their primary purpose effectively.Pros:- Affordable price point- Securely hold magazines when properly mounted- Compatible with standard beltsCons:- May lack advanced features of pricier optionsBottom Line:If you're looking for basic magazine storage without breaking the bank, these holsters are a solid choice. They get the job done without frills, making them an attractive option for budget-conscious buyers.
Customer
Reviewed in the United States on December 15, 2022
These are pretty good for the money. Very adjustable and work well for USPSA and steel matches. A bit of a pain to mount as you have to take them half apart but you almost have to do anything and without a mag in them they flex more than I would like but that is to be expected with the versatility these offer. For the price and versatility I dont think you can beat them.
Canadian Crabapple
Reviewed in Canada on June 22, 2021
These work awesome. I’m no competition shooter but I’ve ran my mags through them a ton and they have held up perfectly. They showed up exactly as they were advertised. Fast shipping as well!
F44
Reviewed in Canada on November 18, 2021
I bought a set of 5 for my shadow 2 and I needed assistance in some issues. Will, the person I communicated with resolved the problem. After sales is very important to me, to any customer. I highly recommend this product to new sports shooters.
Eduardo Pontual
Reviewed in Canada on April 29, 2021
Best value for the price, liked the material, hope it can last the rough usage.
Tiff
Reviewed in Canada on June 8, 2020
Seems well built. Easy to switch to lefty holds glock and smith&wesson mags supper tight but are easy to pull out and put back so There great for speed loading but these are my first mag holders like this so i have no other brands to compare too. I will repost. If they break
Peter
Reviewed in Canada on December 20, 2020
These mag holders are affordable knock-offs of high end, competition-oriented holders which can cost 3x+ more per unit. If you are patient and handy with small tools, they can provide a low cost entry into competitive practical shooting sports. They are highly adjustable to a range of magazines and fit most common belt systems (up to 1 1/2” width). Made of plastic, they will not have the lifespan of high end units made of aluminum etc., but until you get into high frequency, intense practice and competition sessions they do the job. You have to spend time adjusting them to fit your mags, dealing with many tiny nuts and screws as others have mentioned (would be nice if company included some spares as they do tend to go walkabout!). Getting them mounted on your belt is also a bit of a pain; once you get them setup you will want to leave them on. As shown in accompanying pictures, I made a couple of mods which improved holders a bit. As they come, mag retention is by friction alone, which changes with use, temperature, etc. You can tighten the top black knobbed bolt down for secure retention, but then mags may be sticky to pull out. I epoxied 3/4” by 1/8” thick rare earth magnets to the inside center of the outer panel of each holder, so the magnet was centered over the fortuitously positioned hole through the inner panel of each holder (silver disc visible in photo). The resulting clearance is perfect for effective mag retention, without any scraping or interference and allows one to reduce the friction screw pressure, giving a secure but slick action. Note some competitions disallow magnet-only holders; it’s not clear if they would rule this system out, but if that ever was an issue one can quickly undue 2 nuts and remove the outer panels with attached magnets and use friction retention alone. Also as seen in photos, I drilled a tiny pair of holes in lower rear corners of each side of holders, and pushed through a 4-40x1” screw, with a piece of black plastic tubing as a spacer (cut to fit my mag thickness), with a nyloc nut on inner end. This addition made the mag holders much more sturdy and stable. Finally, as others have suggested, once I had all the holders adjusted so mags fit well, and got them mounted on the belt at the correct angles (tilting slightly away from belt, and slightly forward works), I applied blue medium threadlock to every nut and bolt (except top friction knob) and retightened everything carefully. Several friends use these holders as well, without modification, and seem happy. They use the holders with Krydex belts which also seem fine. I had a similar but higher-end Black Scorpion belt, on which these customized holders also work well.
Linette R.
Reviewed in the United States on March 22, 2019
I haven’t run them in a match yet, but they appear to be quite sturdy and easy to convert from a double stack to a single stack (to run with my 1911). These are very impressive for the price and I was just practicing dry reloads and was very happy. I would say worth every single penny. They were challenging to get into my belt, so now that they are on, they are staying on. So if you are someone who likes to swap around setups, I wouldn’t recommend these or I would recommend getting a second belt (that’s what I did). I do have two minor complaints, but again for the price, I can live with both of these:1. I wish these came with instructions of some sort on swapping out the spacers and how many of the rubber washers you should leave in so that it makes your adjustments a little easier (again a very MINOR thing)2. I wish the panel on the front that allows you to access the screw that adjusts cant of the mag was easier to get off (again, A very minor thing).
Recommended Products
