Your cart is empty.
Your cart is empty. Model: GAA8S2U,GA91S2H
Voltage: DC 12V
Current: 0.45AMP,0.35A
Right Fan Dimension (L x W x H): 100mm x 100mmx 12mm
Left Fan Dimension (L x W x H): 87mm x 87mmx 12mm
Screw holes distance: approx. 42mm x 42mm x 42mm (Center to Center)
Power Connector: 4-Pin Header
Application:
For ZOTAC GTX 1070 Ti Mini (ZT-P10710G-10P)
For ZOTAC GTX 1080 Ti Mini (ZT-P10810G-10P)
For ZOTAC GTX 1060 6GB GDDR5X (ZT-P10620A-10M)
For ZOTAC GTX 1060 AMP Edition 6GB GDDR5X (ZT-P10620C-10M)
Kandis Johnson
Reviewed in the United States on February 19, 2024
Pun intended. Got this for my husband as his stopped working. Got them, popped those bad boys in with some adhesive and boom. These bad boys worked!!
Valdez
Reviewed in the United Arab Emirates on January 10, 2024
Good: It literally gave the same brand/model(APistek) of fans so it did fit exactly.Bad: The length of the wires is too long or I just cant route it properly, but its not too big of a problem, you'll just have the fan connector sticking out the side of the gpu.Notes: If you need to replace the smaller fan, it is very difficult. The fan connector is very hard to disconnect so I recommend buying proper tools like nose pliers, and definitely buy thermal paste since you need to remove the heatsink to disconnect it. I just saved myself the trouble and only replaced the large fan since it was the only noisy fan.
Robert Brown
Reviewed in the United States on February 12, 2023
1 star was removed for a) lack of instructions, b) 20$ is a bit pricy for a basic fan considering a somewhat annoying way of replacing a fan that requires- Disassembly of heatsinks with fans and shroud- Removal of a plastic shroud- Removal of a fan.- Tiny screws everywhere, and without angled tweezers or magnetic head screwdriver, nearly impossible to return.Most of these are down to crappy Zotac design, but product instructions would at least go a long way in helping do the replacement procedure.
Joshua Romero
Reviewed in the United States on June 12, 2022
Had the original fans in my GPU rattling around for a while, and these are so silent and smooth, I thought I hadn't turned my tower on when it was. Highly recommend these!
SpidyM
Reviewed in the United Kingdom on September 12, 2021
Great sellers who helped my out after a mistake was made... and fans are excellent, even better than Zotac original ones! Cheers!!
Justin butler
Reviewed in the United States on March 20, 2021
Installed the fans on my gtx 1080 zotac mini. The 100mm fan bearings were failing so these luckily were available. Works just like I never changed them. Make sure to get thermal paste when you do this!
Joshi
Reviewed in Germany on April 9, 2021
They just send me two of the wrong Fans.As you can see on the Picture, the Zotac GPU has two different sized Fans.I got two simular Fans, which dies not fit the FANs which are in the images or on the GPU. Not sure if this is a scam or not, waiting for the refund.Edit: Two Stars because the refund without any complications.
Customer
Reviewed in Canada on April 6, 2021
These fans are identical to the stock fans that came on the Zotac GTX 1080 Mini, same brand and everything. Stickers and all.
Christopher Drake
Reviewed in the United States on April 19, 2021
I've had my GTX 1080 for a few years now and have kept it clean. Despite this, one of the fans started to fail. This fan is a perfect replacement.Installation was easy, just had to undo four screws to remove the fan shroud from my GPU and then three more screws to remove the old, dead, fan from its mount on top of the heatsink. Installing the new fan was as simple as retracing my steps, just with this new fan instead.
mary delany
Reviewed in the United States on September 30, 2020
Fans came in with wire loose for the 2nd fan connector making it not use able, 33$ for faulty fans seriously?Update October 7th: Ordered replacement fans, no cut wire, got it installed in graphics card and running...guess what... THE LARGE FAN ISNT SPINNING. AGAIN another faulty fan. Are ALL OF THESE fans you have in stock used? because this is complete utter bull. Only shopper I manage to find for this graphics card and they're all faulty broken so far.
Pete
Reviewed in the United Kingdom on September 11, 2020
First this is 4 stars rather than 5 as the amazon page contradicts itself over what you are ordering (front, rear or both fans). That said I asked a question of the seller and got a prompt reply confirming I had ordered the right item (I wanted both fans).They arrived quickly and looked like new fans, matching the ones I was replacing.I swapped both fans, though only the larger of the two was causing problems (some noise as it spun). To do this you have to disassemble the card and re-paste the GPU (REMEBER TO GET SOME THERMAL PASTE).I also took the opportunity to remove the backplate, and apply some thermal pads on the back of the VRM and VRAM. I cut away the plastic backing on the backplate so the pads contacted the metal. The backplate certainly gets hot now so is dissipating quite a bit of heat.Reassembled the fans are much quieter now (they must have been making more noise than just the one I could definitely hear) . Temperatures and stability seem better, but this could also be down to the repasting the GPU with Thermal Grizzly Kryonaut and thermal pads on the backplate.All in all a good experience, I got to take my GPU to bits and the fans are working fine!
Benji
Reviewed in the United States on February 26, 2020
Good product, cheaper quality plastic fins vs zotac’s original replacement. Fan bearings sound ok, runs well. Kinda pricey though, similar aftermarket fans for this GPU can be purchased for $20 overseas from China.
Daniel
Reviewed in the United States on April 20, 2020
To my surprise these were a DIRECT replacement to the original ZOTAC fans on my graphics card. Same heat shrink in the same places, and same ZOTAC stickers which i didn't expect. Only have just installed but so far quality seems great, fans are as quiet as the originals and I'm back in business.
Recommended Products