Your cart is empty.
Your cart is empty. Model Name: T129215SH
Voltage: DC 12V
Current: 0.3A
Diameter: 85mm
Screw mount hole distance: 40x40x40mm
Power Connector: 2-Pin Header
Application:
Work for Zotac GTX 1050 Ti Mini
Knight
Reviewed in the United States on March 18, 2024
Fan works as intended, however the plastic cable brace was a bit too long for the ZOTAC gtx 1050 2gb model, so after modifying the fan, it fit perfectly!
Barvin B.
Reviewed in Canada on December 21, 2024
works for single fan (2pin) HP OEM GTX 1650. Temps without a working fan were over 90c, with a working fan 70c while gaming. Idle it hovers around 40c
varun g.
Reviewed in India on July 25, 2023
Works and sits perfectly on Zotac gtx 1650 (single fan) but the blades are about 1mm shorter than the original ones, which I think wont be an issue.
kaminski michel
Reviewed in France on April 30, 2023
Le diametre du ventilateur ne correspond pas à la carte graphique gtx1050 .Obliger de modifier la longueur des pales .
Billyk
Reviewed in the United States on August 1, 2022
Bought 2 of these in November 2021, now August 2022 and the bearings are shot. First died in month and a half. Second one just died.It is really a shame that they did not last.They were very easy to install. And while they worked they kept the video card cool.Bottom line...Avoid these and look elsewhere.
claudio bergonzoni
Reviewed in Italy on May 22, 2022
Acquistata per sostituire la ventola bloccata di una scheda video pny funziona benissimo ed è silenziosa
John S
Reviewed in the United States on March 29, 2022
This is a perfect replacement for a bad fan. My old fan started making these terrible vibrating noise so I installed this unit and it fit perfectly and is very quiet.
Brandon Hughes
Reviewed in the United States on February 26, 2022
Worked flawlessly with my Zotac GTX 1650. No modifications, polarity was correct. Installed in less than 5 minutes. Running smoothly now. 10/10.
Don Parker
Reviewed in the United States on July 30, 2021
1. The power connector pins were the wrong way around thus polarity of supply voltage was backwards and the fan would not spin. Was able to remove the pins from the plastic connector and re-insert in the correct orientation which is shown in the photo.2. This fan is thicker and has thicker blades (15.2 mm for the hub) than the original (10.9 mm), thus it sticks out of the airflow shroud somewhat (approx 2.8 mm for the hub, approx 1.5 mm for the blades)(see photos). Yes, my table is off-level ;-).3. Seems to work fine. Somewhat quieter than the original, but can't be sure if that's due to lower rpm, however it does keep the GPU temperature under control as well as the original.
lm7
Reviewed in Germany on February 25, 2021
We are having one of IdeaCentre PC from Saturn, GTX 1650 inside, bought mid 2020.Unfortunately cooler of this GFX seems to be of lower quality as it stopped spinning already after 3-4 months usage - what resulted in most games unplayable, even in lowest resolution.I was unsure if replace alone or send back and claim guarantee (which, let’s face it, can take easily 3-4 weeks). My kid needs PC daily for home schooling (and of course gaming) so a month ‘off grid’ is not really an option which drag attention.Decided to repair but real problem was finding (at all!) any matching cooler, with reasonable price and delivery time.This one was perfect finding. Arrived soon, installed next day, and PC works again,GFX card temperature around 60 degrees only, whereas with dead cooler, even with low resolution set in games it was close to 90 and game was lagging all the time. I hope this cooler will make at least few years.—-PS. If you like above feedback, please flag as it helpful. Thanks!
Vickie
Reviewed in the United States on April 28, 2021
Worked perfectly on my zotac 1650 single fan gpu!
t345
Reviewed in the United States on December 1, 2020
No idea how long this will last, but my video card no longer makes a terrible noise from the fan. I used MSI afterburner utility to crank the fan to full speed and its still pretty darn quiet. Its a perfect fit. Well, you do need to chop off part of the little plastic thing that holds the cord off to the side because its too long. There's also a little rubber plug you'll have to pull out with a pair of needle nose pliers.This is a common sense installation. I don't believe you can botch it up. Buy it and save yourself the money for a new video card.
Erin Krewson
Reviewed in the United States on January 5, 2020
Had to snap off the extra little plastic part that the wires ran through, other than that, this fan was a direct replacement, and was easy to replace. My GPU is now running up to 30 degrees cooler than the last fan was keeping it at, Thank you Very Much!!!
Recommended Products
