Your cart is empty.
Your cart is empty. Specification:
Model: FD7010H12S
Voltage: DC 12V
Current: 0.35AMP
Fan Dimension (L x W x H): approx. 75mm x 75mm x 10mm
Mounting holes distance: approx. 40mm x 40mm x 40mm (Center to Center)
Power Connector: 4-Pin Header
Application:
For Sapphire HD 6930
For Sapphire HD 7850
For Sapphire HD 7870
For asus GTX 750 Ti
For asus R9 270X
For asus geforce gtx 760
For asus gtx770
For asus GTX 570
For MSI N460GTX hawk
For MSI R6750
For MSI R7770-2PMD1GD5
For MSI GTX 660
For MSI GTX 670
For MSI GTX 680
For MSI GTX 690
For N560GTX TI TWIN FROZR II OC
Can work for other many Graphic Card, Please check the size and mount hole distance of the fan from your own GPU.
Customer
Reviewed in the United Kingdom on January 3, 2025
Both leads to the fans are the same length and results in one not being long enough. Had to extend one which was more work which had to be done.
Jimbo
Reviewed in the United States on September 8, 2021
I got it to work, but I needed a four pin connector.
leandro
Reviewed in Spain on June 11, 2021
llegar y montar, de momento muy bien
Troy Killingsworth
Reviewed in the United States on May 31, 2021
Did exactly as described, they weren't a drop-in for my particular card so the cables didn't route properly but that's a mild inconvenience at worst.
Client d'
Reviewed in France on January 21, 2021
une seconde pour ma carte graphique msi 560 dont un des ventilo faisait un barrouf!
J.V.
Reviewed in the United States on July 19, 2020
First time buying the replacement fan for this card from 3rd party seller (irobot?) and it fits great. Although it's 9 years old graphic card but I intend to use it for something simple programs until it's dead and saves me buying another graphic card.
Kevinp
Reviewed in the United States on May 6, 2020
These replaced the broken fans on my older PowerColor R9 380. They fit perfectly. The short leads were just the right length to plug into the little PCB power splitter. They're nice and quiet. We'll see how long they last...
Roberto
Reviewed in Italy on November 27, 2020
Ottimo prodotto
Tom B
Reviewed in the United States on November 11, 2020
Installed on an Asus GTX 760. Fans fit perfectly. However, the wires are excessively long requiring a bit of creative routing and zip tying to the outside of the shroud. I'm OK with that but if you're a stickler about having a factory look, this might bother you.You will definitely want to have thermal paste on hand because you will need to remove the cooling fins to access the connector. This graphics card is old enough that it's about due to replace the thermal paste anyway.
Andrei V. Anghelescu
Reviewed in the United States on November 10, 2020
I bought them to replace some the fans in an aging MSI GTX 1050, being apparent they were of the right size, but with different connectors. Physically they fit fine, and I ended up connecting them to the case fan power rail, rather than the one on the graphics card. A bit wasteful, as they run at full power, but it was easier that way.Unfortunately, a mere month after the installation both fans started to rattle loudly. How loudly? They are in a separate room and I can hear them faintly through the wall.
AMazon1234
Reviewed in Germany on October 7, 2020
Diese Lüfter funtkioniere einwandfrei mit der MSI GTX570 TI Twinforce
Jonathon
Reviewed in the United States on December 18, 2018
I cannot believe how much quieter my system is after replacing these fans! I had apparently become accustomed to the slight abrasive sound coming from the old fans, because I didn't even realize they were going bad. It wasn't until one completely died and started making a horrible grinding that I knew I had to replace them. Now I can barely tell my system is on, even with three 100 mm case fans and two hard drives!I first mistakenly ordered the 85 mm fans (https://www.amazon.com/gp/product/B07D3PFSRW), which are for the 2GB Black Edition of the HD 7850; my Radeon HD 7850 1GB card uses 75 mm fans. Make sure you measure yours before ordering!The wire harness on the new fans is quite a bit longer and laid out differently from the OEM fans. Because of this, I had to get a little creative tucking the wire and connectors into the shroud. See the two attached pictures. For the long wire, I ran the slack around the middle of the shroud. For the short one, I wrapped it in a loop and pushed the connector down into the corner of the shroud.If it's not obvious to you, here's the procedure for replacing the fans:- Remove the PCIe card from the motherboard- Remove the shroud/fans/heatsink assembly from the card by removing the four spring-loaded screws from the back side of the board- Remove the shroud/fans from the heatsink by removing the four tiny screws on the inside of the shroud- Remove each of the fans from the shroud by removing the 3 screws on the outside of the fans, sticking your screwdriver between the blades- Disconnect the fan from the wiring harness and pull the wires through the openingReplace everything by following the directions in reverse.- Optional: Clean the old thermal compound off of the heatsink and GPU and apply some fresh compound.Enjoy your quiet fans!
Amoinete
Reviewed in the United States on November 26, 2018
One of the fans on my Sapphire HD 6950 started making a loud awful noise if it spun at all. Video card prices are crazy right now so I needed to get so more life out of this one. I bought this fan replacement and I am so happy that I did. It took some doing to replace as the long cable was thicker than the original and was much harder to tuck away. Once I got both fans replaced and everything nice and neat, everything started working much better. The video card no longer makes noise and the temperature dropped in the case since the case fans no longer had to compensate for the failed fan, which in turn cut down on the BSODs from playing more resource intensive games.
Recommended Products
