Your cart is empty.
Your cart is empty.Product Description
Snow Melting with Ease
Activator Included
The M326 line of activators comes with all standard, large, jumbo and high-wattage SnowMeltz kits. Never worry about forgetting to power on your snow melting system before a snow storm.
Power Switching
The M326 series also have the power switching device and handles up to a true 30 amps of load. Eliminating the need for a panel for systems under 190 square feet.
For systems between 200-380 square feet, we use a M326ARS-2Z, which has dual 30-amp power switching properties.
Automatic is Awesome
Ensure you get the response you need for you heated driveway or heated sidewalk system with an automatic moisture and temperature sensor. The activator will power on the snow melting system when snow is detected and the temperature is below 37 degrees and then run for 90 minutes after one or both of those conditions are not met.
M326 Series Activators
- Moisture Detection
- Temperature Detection
- 30 Amp Power Switch (M326A)
- Dual 30 Amp Power Switches (M326ARS-2Z)
- Manual Switch
- Afterrun Settings
- Weather-proof Case
- Adjustable Temp & Moisture settings
SnowMeltz Jumper kit Placement
SnowMeltz Jumper Kit
The SnowMeltz Jumper kit comes standard with every SnowMeltz Snow Melting system. Each kit contains enough materials to make four jumpers.
We've got concrete handled!
SnowMeltz Jumper Kit
Installing a SnowMeltz snow melting kit in new driveway or sidewalk concrete and have to deal with control joints, we've got a solution! First step is to layout your SnowMeltz mat so to minimize the number of times it crosses a joint. When it does cross a joint, by using the provided jumper kits to encase and protect the SnowMeltz heating element, cracks that occur at that control joint greatly reduces the possibility of damage to the heating element, adding years of snow melting to the system.
- For use in new concrete pours, not needed in sand beds or asphalt.
- For control joints only, not for use with expansion joints.
Easily Heat your Concrete, Asphalt, Paver Driveway or Sidewalk with SnowMeltz Snow Melting Mats
Pavers
Embedding SnowMeltz in sand below pavers keeps aesthetic surfaces free from Ice and Snow with a heated sidewalk.
Concrete
Keep crucial access concrete driveways, like walkways and ramps clear with a snow melting mat system.
Asphalt
Embed SnowMeltz in asphalt to create snow & ice free heated driveways and paths.
Follow all instructions & local codes
Complete Testing
Perform all required tests outlined in the installation manual at several stages throughout installation to ensure that heating element has not been damaged.
Failure to perform all the required tests at several stages can cause system damage to be missed which can lead to system errors, ground faults, non-functional systems, and unrepairable damage.
Completely Embed
The SnowMeltz heating cable MUST be completely embedded in concrete, asphalt or in the sand bed below pavers.
Both connection/junction points must also be fully embedded, the connection point at the end of the heating element and the connection point between the heating cable and the black unheated (cold lead) cable.
Do not embed in gravel or stones.
Do Not Power On
Do not power on the SnowMeltz System until it has been completely embedded.
Do not power on a SnowMeltz System to "test" or to dry out concrete.
DO NOT CUT HEATING ELEMENT
Be sure to order a SnowMeltz the fits the area, usually order one that is about 10% smaller than area. The SnowMeltz heating element CANNOT be cut or shortened to a fit a space.
Smaller size systems are available to fit smaller areas.
Avoid performing any cutting/drilling tasks on a finished/partially finished surface that could cause damage to heating element.
SnowMeltz Kits
Standard Size SnowMeltz Kits
Standard size SnowMeltz kits use a single 30 or 40 amp 240 volt circuit. Sizes from 10 to 185 square feet. These kits come in single or multiple mat configurations and are share a single activation device. The activation device comes with moisture and temperature sensors to operate at maximum efficiency.
Large Size SnowMeltz Kits
Using two 30 or 40 amp 240 volt circuits and multiple mats, the Large kits come in sizes from 200 to 370 square feet. The activation device comes with a remote moisture sensor for optimal placement and is used in conjunction with a temperature sensor to operate at maximum efficiency.
Jumbo Size SnowMeltz Kits
Using two to four 40/50 amp 240 volt circuits multiple mats, the jumbo kits come in sizes from 410, 615, 820 or 1040 square feet. The kit includes a contactor panel suitable for the size of system. The activation device comes with a remote moisture sensor for optimal placement and is used in conjunction with a temperature sensor to operate at maximum efficiency.
Basic SnowMeltz Kits
Basic SnowMeltz kits use a single 20 or 30 amp 240 volt circuit. These kits are designed for areas smaller than 50 square feet. Easily add a small snow melting mat to sidewalks, landings or paths. All Basic snow melting kits come with a 12-hour timer for activation.
Not Just SnowMeltz Experts, but Electric Radiant Heating Experts
SnowMeltz is just ONE of Heatizon's wide range of amazing electric radiant heating products. We apply our vast knowledge into every product we make. Not only do we provide snow melting, but we can heat your floors, gutters, pipes and even your roof.
Jst
Reviewed in the United States on January 18, 2025
The media could not be loaded.
colinmcc
Reviewed in the United States on December 12, 2024
Now in it's second snow winter, this works well to melt snow on our entrance pavers.
Daniel
Reviewed in the United States on November 29, 2023
Can’t wait to see how it works in the snow. Installation was smooth, instructions easy to read. Called a professional electrician for hook up. No issues. Will be installing the driveway soon.
Thomas J. Gillispie
Reviewed in the United States on January 22, 2021
I took a chance and added one of these to our big landscaping project to give our vacation home in snowy Massachusetts a better entrance. We are blessed to have this place and I want to say we work to help eliminate lack of and substandard housing.My landscaper had never done a snow melt mat and I'm handy enough to just go for it. I put a layer of 3/4 inch pink ridgid foam, a little sand, mat fastened with garden fabric staples, more sand and then pavers.I ran the mat cold lead thru concrete block basement wall and 1/2 flex conduit to the lamppost where I mounted the sensor/controller.Controller instructions are great but you need to be comfortable with wiring diagrams. Controller has dry relay contacts and can be externally triggered via relay or switch on its side. I plan to connect controller to home automation system to get an email when triggered and possibly allow manual trigger of a melt cycle.Controller has green light when powered which blinks when doing melt cycle.Been working GREAT. The melt area is just a little narrow (see pic) but paying double for wider coverage would be too much. It would take a while to clear a really deep snow but a quick shoveling would catch it up and clear the end of storms. I'm very pleased with performance, quality of controller, and tech support when I called to clarify a question about sand depth.
Julie b
Reviewed in the United States on January 10, 2021
Great product. High quality and it really works! I laid the wires on too of the rebar and then poured the concrete. That easy. Needs a 240V hookup, but easy enough for handyman or my electrician. Check out the incredible effectiveness in the attached pictures. Love the auto on feature. If you want to keep snow off your driveway, walkway, whatever...order this product. I live in SW Colorado and this is a godsend. Needed the walkway area clear for visiting grandmas and it worked perfectly.
MHK
Reviewed in the United States on December 25, 2020
tldr - if you are wondering if this heating system works, the answer is it works great and you should buy it.Long story:Bought the 85sqft system for a path from my house to my woodworking shop in august 2019. We hired a contractor to make the path and install the heating system this past summer. Hired an electrician to hook it up to power. First snow storm this year, and snow didn't melt. I called the vendor and quickly was transferred to engineer Josh who immediately knew this was a wiring issue. The electrician had done it wrong. Josh gave me his personal cell number so we could FaceTime. Within 10-15 minutes he walked me though the wiring fix. Through FaceTime Josh verified my work and asked that I let him know how it works out at the next snow storm. There were a few smaller snow falls, but I wanted to wait for the next big storm before writing this review.Over last night and today (12/24-25) in NE Ohio a snow storm dropped 10+ inches of snow, and is still snowing. As you can see in the attached picture, the paver path is free from snow and ice. My only regret is that I didn't get a slightly larger system because the 85sqft was not quite long enough. You can see very clearly where the heating elements cover.If I have another project where I need to heat my driveway or a pathway, I will come directly back to the SnowMeltz product.
John
Reviewed in the United States on August 27, 2019
Product arrived on time 1st glance nice packaging well laid out instructions were nice easy to read easy to follow Install went flawless customer support is top notch
52 carp
Reviewed in the United States on December 2, 2019
We had this installed on our front walkway before we had 2” bluestone laid on top of it. After our first snowfall, the walkway was completely melted and dry after about 4 hours. Check out my before, during and after photos. One of the best investments we ever made. I’m thinking about doing the same thing for my driveway before I have it blacktopped.
Recommended Products
$25.99
$ 10 .99 $10.99