Your cart is empty.
Your cart is empty.one piece precision mounting system
MACz
Reviewed in the United States on September 11, 2023
I bought and mounted my scope with Zero issues. The mount is sturdy and easy to mount.
Mr B.
Reviewed in the United States on December 24, 2023
Easy install. Good alignment and holds zero. Read instructions and use correct torque settings when installing (10/22 with stainless steel barrel has an aluminum receiver).
H. Zahorik
Reviewed in the United States on August 7, 2022
I used this mount to upgrade my Ruger to a 3x9x40 scope. I like the one piece design so I didn’t have to worry about the mount being out of alignment
John T Taylor
Reviewed in the United States on November 8, 2019
Perfect mount for my Ruger 10/22. I have had this mount for a year now and it has held up very well, solid and tight mount for my scope. Very happy with the purchase.
Bart
Reviewed in the United States on October 4, 2018
I purchased the medium height mount. It's mounted a Nikon Prostaff Rimfire II 4-12 x 40mm scope on it. The mount attaches to the rifle with ease and simplicity and is well-made. Simply remove four plug screws from the 10/22 and attach the Game Reaper mount with the supplied screws. Everything lines up perfectly. The matte finish of the Game Reaper mount complements the blued finish of my Ruger 10/22 target model. I'm including a photo of the setup - IMO, looks sweet.
WISEGUY
Reviewed in Canada on October 12, 2017
Ideal for mounting a scope on a rim fire it looks almost like the scope and rifle were made for each other. Locks down with no movement after zeroing in. I paid 102.36 for mine. As of this review they are $54.79 plus freight. Enjoy the lower price, I think I feel the shaft.
Numa
Reviewed in the United States on January 16, 2016
I don't understand how this item can receive anything but a five star review! I suffered so long with cheap clip-on rings that looked bad and performed even worse. I love the way the matte black finish contrasts with the super gloss finish of my scope, it looks really good. The machining on this mount is excellent. Beautiful rounded corners, tight tolerances. Total quality. I was initially undecided on the low or medium mount for my 32mm scope. I did not like the look of the low mount, it looked too squashed for me. I'm really glad that I went with the medium mount, gives the scope a little breathing room and looks perfect. Very satisfied and the gun looks awesome!
Richard W Jacovina
Reviewed in the United States on April 15, 2015
Built like a tank out of a single piece of precision machined billet aluminum. It is custom made to fit the 10/22 receiver. Once mounted, it looks like an integral part of the rifle. I used medium thread locker to mount on the receiver. Instructions warn DO NOT use thread locker for the long ring screws. These screws are excellent quality and thread firmly into the mount, making thread locker a moot point. I used the mount to put a Nikon Prostaff 3-9x40 on a 35 year old 10/22. This mount holds the scope like a vice just by using the recommended torque on the ring screws. The mount manages to look good, and be unobtrusive at the same time. I had a question regarding the positioning of the top half-rings and called the DNZ phone number. A receptionist answered the phone and put me on with a product specialist in a matter of seconds. He was able to answer my question immediately. This is my First DNZ product. Everything about my experience with this product makes me confident I will continue to purchase these mounts for future guns. They're well made. Perform flawlessly. And are a great value. Couple that with old-school customer service, and I'm sold.
Oki-Sil-80
Reviewed in the United States on July 7, 2014
* see update below. Very well built mount. The main reason I purchased this mount was watching my father tighten his rings and re-zero the scope on his 10/22 almost every time we went out (yes it had loctite on it and no it was not thrown around in a truck). I have the Ruger 10/22 LVTSB (model 1237) that has a stainless barrel with a black receiver on a walnut stock. So I am not concerned with it matching colors with any part of my rifle... I was looking for a mount I could put on with loctite one time and not have to worry about. I think the Game Reaper is it. I would have given it 5-stars if it fit my scope better. I have a BSA sweet 22 3X9-40 AO and the front rings are up against the start of the bell. I am not worried about security of the scope since the mount is so well made, but I would have liked the ability to shift the scope forward/backward a little to match my cheek weld to eye relief perfectly. As for the mount, it came with good hardware and the holes matched up without issue. The "M" as noted by a another reviewer is noticeable when you take it out of the package and pretty much disappears once you have a scope mounted. The medium mount works out very well with the 40mm objective with a gap just under 1/8" with the front AO scope. Even though it is a little pricey, I would recommend this to a friend if you know the measurements of your scope.*I bore-sighted the scope today and it appears that more of the bell of the scope is inside the front ring than I first thought. The scope is pointed too high to adjust to the point of aim at 25 or 50 yds or beyond. So this will probably be going on my father's rifle and I will purchase the Weigand Intergramount . The other option is to get a different scope.Outside to outside of rings is 4.29″. Standard rings are .63″ wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .86″, 2.57″, .50″. Height of mounts from top of receiver to centerline of scope tube is - low .94″, medium 1.06″, and high 1.19″.
Recommended Products
