Your cart is empty.
Your cart is empty.Product Description
Safety Application
Non-electrical conductive,non-volatile, flame retardant, which eliminates the risk of short circuit and discharges and corrosion damage to the chip and the radiator.
Long-lasting and stable performance
Excellent ease of use and outstanding long-term stability.
Wide working temperature
Wide working temperature: -50℃ to 300℃ (-58℉ to 572℉)
Wide range of applications
Suitable for: CPU, GPU ,heatsink, ovens, chipset, Xbox, High power LED and other components.
Working principle
Filling the gape between heating element and the cooling device, Increasing the contact area so as to achieve the soundest thermal conductivity effect.
Helps disperse the heat from CPU to heatsink effectively.
G104 Thermal Paste Features
- High Performance
- High temperature resistance
- Low thermal resistance
- Non-Electrical Conductive
- Non-corrosive ,Non-toxic
INSTRUCTION
1. Clean the surface of CPU heat sink
2. Apply the thermal grease on CPU or heat source
3. Spread the grease evenly
3. Spread the grease evenly
GARRIE CAGNEY
Reviewed in the United States on March 6, 2025
Works like thermal paste should. Sticky and lasts
Tommy Jager.
Reviewed in Canada on February 5, 2025
Excellent service keep up the good work
rokkinroll
Reviewed in the United States on September 18, 2024
Make sure you read the description carefully because this is a very tiny amount and that was what I expected but it's going to surprise a lot of people because it's so ridiculously small.
gurutech
Reviewed in the United States on May 22, 2024
I do allot of circuit board work and use allot of heat sink paste. I was disappointed to find such a miniscual amount of paste in the jar. Definitely not the amount advertised.Perhaps somebody used some and then returned the rest. The paste was also watery and gritty.Really disappointed for the price paid.
Freeddreamer
Reviewed in the United States on November 9, 2024
My cooler is the Prosiphon Elite cooler, The Ice Giant. I have a really good airflow Full tower. When I used Noctua for my cpu with my cooler, The temp was around 48-56c idle. But with this Thermal Grease I was able to get 44-54c idle. Its thick compound is actually easy to spread. Very good quality for the amount and It does not conduct electric.
George M.
Reviewed in the United States on November 22, 2023
Used it on my 2000 Camaro ignition module. The factory compound was dried up and worn. Cleaned it all up and applied the new compound. Great price and lightning fast shipping. I cant rate the longevity because I just applied it.
James and Lynn
Reviewed in the United States on May 2, 2021
When I received the package and saw how small it really is I wondered if there would be enough paste for the intended use. I have an older, 1996, Bose lifestyle 12 system and had taken the cover off the acoustimass bass module to clean and inspect. The heat sink serves about 14 or 16 power transistors and is roughly 8 inches in length and 6 inches wide with rails on either side that make contact with the transistors. After cleaning the old paste off, I started to apply the new paste with the supplied applicator. I placed a small dab on each of the transistors. placed the heat sink in place to see the contact pattern which was good and then applied a smooth adequate coating on each transistor and also on the contact areas of the heat sink and reassembled. It appears that I still have an almost full container of the paste remaining. Glad now that I did not purchase the larger tube.
Vicente Z.
Reviewed in the United States on October 3, 2021
Bought this as a cheap solution to use on stuff I sell. Tested it on a budget PC I builtmy brother that’s using a core I7-3770 and an uphere CPU cooler. Temps stay at a normal range. Also made a few xbox360’s quiet down.
Lodi joe
Reviewed in the United States on April 8, 2021
I have no issues.
Recommended Products