Your cart is empty.
Your cart is empty.This durable, scratch-resistant film provides a great opportunity to decorate your windows or mirrors with soft, opaque figures, cut as you like. Great for all windows, including showers, bathroom, cabinets, etc. Anyone can apply this easily, in just a few minutes and can be easily removed without mess or damage. Possibly the quickest, most cost-effective way to decorate your home.
Rick
Reviewed in Canada on January 6, 2025
We were looking for frosted glass to make decals for the back side windows of my Crosstrek and this was exactly what we needed. Excellent product and its holding up great in our Nova Scotia winter.
Customer
Reviewed in the United States on January 13, 2025
Loved the frosted look. I obtained the etched glass look I wanted. Reason I gave it a 4 is the vinyl was rolled very tight which caused the vinyl to crease away from the backing which caused some issues when cutting the design.
Vincent Slowiak
Reviewed in the United States on July 29, 2024
It took me several different settings and was about to quit until I used the premium vinyl-frosted glitter setting on my Cricut. Made things way way easier. Try that before you give up!
Bill L
Reviewed in the United States on July 2, 2024
Could not use this in a cutting machine like Silhouette or Cricut. When unrolled, it left a raised line that was nearly impossible to get to lay flat. I wanted it to cut a faux etched glass logo for a door, and wasted most of it trying to do so. Even if flattened out, it slipped on the carrier when running a long sheet through my Silhouette. It could possibly cut small designs with working around or adjusting the raised area on small sheets.It is probably OK to use in full sheets to frost windows. That is where the super easy release from the carrier might actually be an asset.
Fontka
Reviewed in Canada on May 18, 2024
Works perfect for Cricut
The Nothing
Reviewed in the United States on February 26, 2024
I really wanted to like this stuff! I had grand plans but shortly after I began cutting (150gr is plenty) I noticed that the vinyl was not well adhered to the backing. I thought it was the first few inches, OK, I can work with that. I only needed 20 inches. But as the cut progressed, there were lines throughout the roll where the vinyl and backing had separated.This caused some pretty significant defects in my cuts and the rest of the sheet is showing even worse bubbles, so I can't even try to cut again.Turned out to be a complete waste of time and money.I suggest inspecting the whole roll before you make your cut. That way you can return and replace it.
James Davis
Reviewed in the United States on October 26, 2024
I used it to obscure my shop windows. Cut some Polaris logos in it with my Cricut.
Shannon P
Reviewed in the United States on April 29, 2024
Thought this was a great product. I made the mistake of using super grip transfer tape as it was way too strong and I struggled with getting the sticker to come off. Will use regular grip tape in the future and it should be fine.
Lyall
Reviewed in Canada on April 26, 2024
The vinyl is very brittle. When you roll out the roll to cut it, the vinyl has fold lines in it that make it very difficult to cut anything of size. Will not be buying this product again. In the end we were able to make it work but it takes some time.
Jonathan
Reviewed in Canada on December 12, 2023
I loved the look of this but I couldn't place it with any type of transfer tape. Had to place each letter by hand.
MD
Reviewed in the United States on November 5, 2023
The vinyl has exactly enough frost to show up on the pulpit, without being too white or too transparent. It cut beautifully and weeded easily, and the price is fantastic. I am extremely impressed, and I highly recommend it.
Larry H.
Reviewed in the United States on January 19, 2023
I have been working with vinyl on a Cricut machine for 4 years and did not have much issue with this product. It does take some trial an error (much like any other new material you attempt to cut). I took about two attempts before I found a decent setting - I cut this vinyl on the Glitter Vinyl preset with extra pressure, due to the thickness of this material. It cut my project beautifully & it was not terrible (but also not necessarily easy) to weed. It sticks to the intended surface easily, and looks like etched glass.My biggest complaint is the backer paper - it was stuck to (a very well used) Standard grip mat and after about 30 minutes of picking and peeling I finally gave up. I've used this brand of vinyl before and have not had this issue. I'm not sure if using a light grip mat would help, but I would absolutely use your oldest mat with this vinyl so you can just toss it afterwards, like I did.
Gordon Thomas
Reviewed in Australia on March 26, 2021
Worked out well on my cricut just a little difficult to weed out due to the colour. But really happy with my first attempt using it. Thanks quick delivery.
Recommended Products
