Your cart is empty.
Your cart is empty.Product Description
6" x 20' Plastic Mesh Gutter Guard. Prevents leaves and debris from blocking gutter. Can be easily unrolled, cut and shaped with ordinary scissors. Will not rust or corrode. Will be sure to last for years to come.
From the Manufacturer
6" x 20' Plastic Mesh Gutter Guard. Prevents leaves, and debris from blocking gutter. Can be easily unrolled, cut, and shaped with ordinary scissors. Will not rust or corrode. Will be sure to last for years to come.
Summerson Haven Sharon Lea
Reviewed in the United States on February 24, 2025
These worked VERY well & were fairly easy to use…you just have to be patient cuz they stay curled & the edges are really sharp!!! But I’m 64 & disabled and still did all the gutters myself! I can’t afford to have the fancy ones installed but I have 3 large Maples next to my house so no matter what yer gonna have to clean the gutters!!!
Fernando O.
Reviewed in Brazil on February 18, 2025
São 20 FT e isso equivale a 6 metros, o produto é bom mas a unidade de medida está errada
Patricia Myers
Reviewed in Canada on September 4, 2024
works well and easy to install
Ham4Life
Reviewed in the United States on June 21, 2024
My husband installed this all around the upper inside of our RV carport to keep the birds from building nests. The RV no longer has bird droppings on it. Wonderful product and well worth the money spent.
Michael Remillard
Reviewed in Canada on May 21, 2024
Definitely in the high end of the quality spectrum compared to other such products. The plastic is thick enough to be sturdy but not too much that it cannot be bend and placed easily.
PRS
Reviewed in the United States on November 21, 2024
Have used this product many times in the past and continue to do so at different homes. Easy to install and has great performance overtime. Very reasonable.
pamela wallis
Reviewed in Canada on October 2, 2024
Needed just a little more to complete the front.
mark hoyer
Reviewed in the United States on April 23, 2024
I'm surrounded by maple trees. The guards block leaves but catch the helicopter seeds. I had to remove the guards to remove the seeds.
Sergio
Reviewed in Mexico on March 28, 2023
Lo utilice para crear unas estructuras para plantas y es sencillo de cortar, facil de manipular y bastante resistente
Secrent
Reviewed in the United States on October 7, 2022
I didn't want to spend a ton of money on gutter guards, so I thought I would try this. Actually, it works quite well, for how long is the question. I have 2 corners of the house where my trees dump a ton of leaves into the gutter. I installed this in those areas without too much difficulty. It is best to start on one end and measure down the gutter to where your gutter supports are and cut a small notch where needed at each one. I only needed to cut one notch on the front end of the gutter. As you start to install the guard, squeeze with both hands to make it into a half moon and then push it down into the gutter with both hand as you move down the gutter. Keep it in the "humped shape" pushing it down and position it evenly. You can use a small screwdriver to poke in a hole and lift up and adjust the plastic to further shape the hump if needed to a more even shape. Should be rounded and secure just above level of the gutter. You can cut it into sections and do a section at a time or continue down the gutter without cutting as you move your ladder. Pretty sure it will do the job of preventing leaves from getting in the gutter. Will see over time if it stays in place, although I don't see why it wouldn't. If I wanted to spend the money, I would buy square mesh fencing which would do the same thing, although much stiffer and sturdier to stay in place and have longevity. But overall, for the price of this it is worth a try.
Buwife
Reviewed in the United States on April 8, 2022
I was skeptical, but for the price, why not? Bought the 6" and it fit into my gutter like a dream without tacking or screws - it fit easily beneath my shingling and under the edge of my gutter. It's been in place for a month, and we've had two serious storms with very high winds - the mesh is still in place. Easy to cut to size with scissors, and I did not find that it was necessary to roll out the mesh the night before as other reviewers suggested. It's pretty pliable (not like metal mesh), yet sturdy, and the roll is small enough that I was able to roll from one end, put it into place and continue along the gutter in that manner until I'd covered the entire gutter. So far, no tree branches or leaves clogging the downspouts, so I am thrilled. As for whether it will keep the 10,000,000 banyan tree leaves from filling/clogging my gutters next year remains to be seen; but so far so good. Well worth the meager price to give it a go before going with a much more expensive solution.
MR. F.
Reviewed in the United States on April 25, 2017
Original ReviewSummary:- I don't think there is really a 5" version available from this page- Either the material has changed or there are two products being delivered from this page (one stiffer, larger opening; the other more flexible, smaller mesh). I much prefer the stiffer version.- It's really cheap compared to a permanent / real gutter helmet products, so still much better than nothingDetails:Last August I ordered a roll of 6" when they were really cheap ($2) to try it out. I tried it and was impressed so in December I ordered 4 more and was again pleased with how easily it installed and stood firm in my gutters. I don't have it attached in any way other than the springiness of the material held by friction within the gutter. About a month ago we had a day of very high winds and I expected to see sections blown 3 houses away, but none of them budged. I had one more section of gutter with a bit more shingle overhang so I ordered the 5" version last week to finish off the last gutter. Here's where things go sideways...I received a 6" roll which was probably a good thing since the material now seems much thinner / narrower gauge so less "spring" to hold in the gutter, and mesh is finer (more openings per square unit). I installed it just like I did the other rolls but it clearly lacks the built in resistance to flex that is holding the other sections tight. It just sort of lies there. I will wait and see but I wouldn't be surprised it comes out in a good gust and I'll need to secure it somehow. I can't say for sure what the model number was on what I previously ordered, but my history says it was VX620 the same as this. It was for sure a Frost King brand.See photos that show the difference in the mesh and how it lays, and the label from my most recent purchase.Hopefully sellers can clarify which version of the product they are selling so if you want the rigid version or the floppy version you'll get what you want.UPDATE 9/2019There are sections of this that have been up for nearly 3 years and haven't moved. We recently had a huge storm that tore down trees and buckets of rain but all gutter mesh stayed put. I've been checking my gutters with a cheap drone instead of getting out the big ladder and haven't been up to the highest part since installation. After the big storm I went up to look things over and the larger opening mesh was standing tall and clean but the finer mesh style was sagging and starting to get clogged. I attempted to remove it to clean and reinstall but it was rotted and tore apart.Still keeping the review as 4 stars but again there is a big difference between the larger mesh opening and smaller mesh opening materials. I'm going to look for the good stuff at the local hardware.
Recommended Products
