Your cart is empty.
Your cart is empty.Product Description
- Designed for DIY homeowners and contractors to easily install on all gutter systems. No special tools or skills required.
- Heavy .018 high strength tempered aluminum construction with 410 stainless steel installation fasteners. Will never rust or degrade.
- Our solid muti-point design allows full water drainage and prevents debris from pushing into drain holes. (Debris will get pushed in and stuck in other products with drain holes located on ridges).
- Our solid 3-point design allows airflow by elevating wet leaves and other debris off of the cover surface, preventing them from laying flat and sticking to the cover.
- FlowGuard gutter guards cannot be seen from the ground.
- Reduces or in most cases completely eliminates any future gutter maintenance!
- Works on all roof types and pitches.
One of the standout features of FlowGuard is its exceptional resistance to clogging. The 3-Point design facilitates airflow by elevating wet leaves and debris off the cover's surface, preventing them from sticking. Over time, light winds and natural elements easily blow away dried leaves and debris, maintaining your gutter's effectiveness.
When it comes to performance, FlowGuard excels. It can handle up to 20.1 inches of water per hour when covered with wet leaves, which is 1.5 times greater than the world record. Dry debris is often cleared with a mere 5mph breeze, while wet debris requires a 21mph wind speed for removal. This level of strength and durability ensures that your gutter system remains free-flowing for years to come.
FlowGuards unique 3-point design allows airflow by elevating wet leaves and other debris off of the cover surface, preventing them from sticking to the cover. Over time, light winds and other natural elements simply blow away the dried leaves and debris. Our 3-Point design also prevents water overflow by acting as dams, slowing water flow over the cover allowing full drainage into your gutters, even when covered by wet leaves and debris.
FlowGuard Gutter Covers are manufactured from the highest quality material and designed to last and perform in the harshest conditions for at least 50 years. This ensures all FlowGuard gutter protection products will be free from defects in workmanship and material for a period of 50 years from the date of purchase to the original purchaser or contractors end use customers when purchased and installed by contractors.
FlexxPoint Gutter Covers LLC, Founded by a proud Vietnam Veteran, is a small, hands-on, family owned and operated manufacturer of FlowGuard premium aluminum gutter covers. FlexxPoint Gutter Covers have been installed on over 250,000 homes in the USA.. We manufacture all of our FlowGuard Gutter Cover products in-house at our Huron, Ohio manufacturing facility and ship them direct to contractors and homeowners across the country.
In addition to its superb functionality, FlowGuard offers practical benefits. It's available in 46-inch lengths for easy transport and installation. Plus, it does not go under the shingles of the roof, eliminating any potential damage. You can enjoy peace of mind knowing that it won't void your roof contract, and once installed, it becomes a permanent part of your gutter system, adding years of life. It's designed to work with any roof material or pitch, maintaining its performance even when covered by wet leaves and debris.
Available in various color variations and sizes, including Thermal Thaw Black, Brown, White, and Matte Aluminum. FlowGuard is your dependable solution for maintaining clean, clog-free gutters. Its use of high-strength aluminum ensures it won't rust or distort, and with the addition of stainless steel fasteners, it's built to last. Plus, its unobtrusive design means it cannot be seen from the ground, blocking all types of debris and allowing for high-volume water flow. FlowGuard is the ultimate choice for those seeking a reliable and long-lasting solution for gutter protection.
Wayne Baker
Reviewed in the United States on February 24, 2025
Worked as described. Also purchased them used and they were in great condition and a good value
Shane
Reviewed in the United States on September 28, 2024
Easy to install. Needed 3 more pieces called the company had it in 2 days!! Thanks
Tundra
Reviewed in the United States on December 5, 2024
Measure the width of your gutters from front to back at the top. I accidentally bought 5 inch gutter guards at Costco and returned them. I have 6 inch gutters. I bought the 6 inch gutter guards here and they seem to be well-made, nicely coated with the paint, easy to install, and perfect shape for my “K” style gutters. Each piece has four screw holes in the front to screw into the top of the gutter lip and four screw holes in the back that I screwed into the aluminum flashing underneath the shingles. I went to Ace Hardware and bought a DeWalt 1/4” X 2 9/16” long bit with a magnet and it worked perfectly. The screws are not stainless steel or they would not have held onto the magnet bit, but for installation it worked in my favor, so I’ll see how long they last and if they rust, I’ll replace them. Zinc plated screws are much better quality today than they used to be. I had plenty of screws, a few left over, so I put one or two screws in the middle of the grid/drain holes where the pieces joined together so maybe the wind won’t affect them as much. As you can see from one of the photos, I fabricated around one of the corners to try to keep any leaves from slipping in. It’s not visible from the ground and it seems like it will work very well. Overall, I am very pleased and so thankful that now I don’t have to clean my gutters anymore. As this company slogan says, now I can keep my mind “out of the gutter.” 😊 I hope this review helps you.
JOE
Reviewed in the United States on November 13, 2024
Easy to install. Strengthen the original gutters considerably! Measure twice don’t make my mistake of buying the wrong size to start with !
Aram
Reviewed in the United States on October 5, 2024
(6" gutter system) The product arrived free of damage and fits perfectly! I've never installed aluminum gutter guards but it was easy peasy! The predrilled holes made it that much more easy and efficient. The company's motto on the side of the box was a nice touch and these are made in America with the exception of the supplied screws. I would recommend purchasing extra screws to be safe. This purchase is a very wise investment for those who have the ability to install them themselves. I found the product to be well crafted and definitely a great value! Don't pay a small fortune to a gutter company if you can do it yourself, Saved $2400!!
surfgilgo
Reviewed in the United States on October 24, 2024
Very happy with this product. Easy to install, cuts without effort and ships with plenty of screws. Did about 160’ of gutters in less than a day.
David F
Reviewed in the United States on May 15, 2023
I purchased two of the 102" boxes, to install over my recently installed 6" gutters.Pros:1. Easy to install.2. Good design. Unlike some of the other gutter guards, these have a lip on the back of the guard which allows you to screw the back of the guard to the fascia. This was really helpful since I had various depths between the front lip and the back of the gutter, due to certain variances in how the drip edge was installed. So, being able to secure them in the back ensured they would not move out of place.3. Screws are included and are of good quality. Be aware that other companies don't include screws with their guards. Given the number of screws needed to do the job, this is not an inconsequential amount.4. Guage of Gutter Guard. Thick enough to be durable. But not so thick that I couldn't bend/manipulate it when necessary.5. Good customer service. I called before ordering and the staff was helpful and responsive.Cons:1. This is really the only con and why I reduced my rating to 4 stars (especially since some other reviewers encountered the same issue). In one of the two boxes I ordered, about half of the guards were bent on the front lip anywhere from 6" to 2" from the one corner. By the way they were bent, I don't think this happened during the shipping process. Instead of calling the company, I went ahead and straightened them out myself.Overall, I would recommend these guards.
T. Jones
Reviewed in the United States on December 16, 2023
These are not quite what I wanted but they're easy to install and they work, as long as it doesn't rain too hard. When it rains hard the water washes right over them. Not sure what can be done. Maybe larger holes or lip on the front, but something should be done to prevent the water from coming over them.
MARTIN RICHARDS
Reviewed in Canada on September 6, 2020
I DIDN'T NOTICE I ORDERED A 6" INSTEAD OF 5". STILL MADE IT FIT THOUGH
Recommended Products