Your cart is empty.
Your cart is empty.Duraflex Flexible Moulding: Moisture proof. Bends like a belt around your waist. Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Seamless construction without lamination defects. For interior and exterior use. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Material is Beige in color. For applications with a minimum radius of 6" or greater. Fastening Polyurethane construction adhesive behind and at miter joints in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Always install Flexible Moulding first is a relaxed non-tensile state. Nails should be kept to a minimum and 3/8” from any edge. For best results, we recommend using Loctite PL Premium Polyurethane Construction Adhesive. Cutting Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on Stain grade material is only on the surface and will be eliminated if sanded. Painting Primer coats are not recommended. Use water based Acrylic Latex Paint. When using Alkyd Enamels an exterior primer such as Kilz is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.
E. Ferguson
Reviewed in the United States on March 15, 2024
Worked great on my curved dry wall. Applied with an air nailer and adhesive. Helped to use a clamp where the molding ended at a doorway. I had to butt two pieces because I didn't want to butt the curve with a matching MDF straight piece. I used Bondo to fill the flexible butt joint and it has held up well with no cracking. A tip: Cut off a couple of inches off the raw ends as the molding process appears to deform the profile at the ends a little. I didn't notice the slight distortion until I tried to mate it to another piece that had a clean cut.
S. Seto
Reviewed in the United States on December 17, 2023
Just what I needed for an S shaped wall. Must leave flat on floor in a warm area before using or wiill be too stiff to mold into curves. Style is readily available to match with wood for straight runs
Jeff J
Reviewed in the United States on November 24, 2023
I used this moulding on the exterior of a home built camper as trim and a seal. This heavy built trim easily flexed around a tight 90 degree curve. Nailed, glued and screwed into place, I sanded and painted it to match the camper and it works perfectly. Not one leak. A little pricey because it’s worth it!
Mr Marchese
Reviewed in the United States on September 24, 2020
My foyer has a rounded closet and this fit perfectly! It definitely matched well with Home Depot’s base molding.My ONLY 2 issues would be - 1. the color that it comes in. I would think that by now this flex molding would come in a white color or at the very least primed. The yellowish-stained color it came in took me 3 coats of paint to cover the molding completely.2. Price. I think it should be a little bit cheaper - but it does its job and I’ll settle for that - I guess.Overall - I’m quite satisfied with it ! 👍
Customer
Reviewed in the United States on August 15, 2019
I have a wall in my house that is curved at a 90 degree rounded angle and the old trim came apart once removed for new floor install. Looked everywhere for a similar product and of course, I found exactly what i needed on Amazon. Easy install easy to paint.
KMc
Reviewed in the United States on December 3, 2018
Looks great on curved wall below my staircase. Cuts great with 60 tooth miter saw blade. Matches perfectly with wood trim I got at big box store.
JOEL ALTUS
Reviewed in the United States on May 3, 2016
Awesome product. Had some curved corners to base and it matched up perfectly with standard the off the shelf moulding at Home Depot. You can cut and mitre with a regular saw just as the wood. I did have to put three or four coats of trim paint to get good coverage. Perhaps if i had primed first it may have gone easier? The paint will crack if you keep bending the moulding back and forth.
Customer
Reviewed in the United States on September 22, 2015
The answer to an ugly problem. I have round corners in my bedroom and could never figure how to trim those areas which always looked awful. This product is amazing. Its flexible and matches the existing trim. Friends are amazed. I wish it were a little less expensive but it is worth the added expense. Best product ever.
Recommended Products
