Your cart is empty.
Your cart is empty.Product Description
HOW TO MEASURE CHAIN SIZE
Each of these components will be measured separately
- Pitch: The length measured from center of pin to center of pin. (P)
- Roller Diamete : The outside diameter of the roller. (D)
- Plate Height : The dimension from top of plate to bottom of plate.(H)
- Pin Diameter: The outside diameter of the pin.(F)
- Pin Length : From the outside of pin end to the other side of pin end. (A)
- Plate Thickness: Thickness of the plates from one flat side to the other side of the same plate. (T)
- Roller Width : The inside width of the inner side plates ( W)
- Factors to consider when choosing an ideal pitch of chain would include:
- 1. In-board or out-board drive sprocket configuration
- 2. Availability of engine sprockets, Final desired gearing
- 3. Set-up difficulities (length of chain measurements)
HOW TO MEASURE CHAIN SIZE
As a first step, we should define the components of roller chain
- Pin Link Plate : This is an outer plate on the pin link of roller chain.
- Roller Link Plate : This is an inner plate on the roller link of roller chain.
- Roller : This rotates on top of the bushing on the roller link.
- Pin : This is press fit into the pin link plate and bisects the bushings in the roller link.
- Bush : This is press fit into two roller link plates and is bisected by the pin in the pin link.
- What Size Chain Should I Buy ?
- Most go kart chains and mini bike chains have the chain size stamped directly on the chain links.
- #35, 40, 41, 420 and 50 chain are used on American Go Karts and Mini Bikes.
- An 11 or 12 tooth clutch sprocket usually indicates the use of 35 chain.
- 10 tooth clutch sprockets usually indicate the use of #40, 41 or 420 chain.
POWER TRANSMISSION ROLLER CHAIN SIZE CHART
10 FOOT 35 ROLLER CHAIN
- Pitch : 0.375 inch
- Roller Diameter : 0.200 inch
- Width between Inner Plates : 0.188 ihch
- Pin Diameter : 0.141 ihch
- Inner Plate Depth : 0.354 ihch
- Plate Thickness : 0.051 ihch
- Average Tensile Strength : 2100 lb
10 FOOT 40 ROLLER CHAIN
- Pitch : 0.500 inch
- Roller Diameter : 0.312 inch
- Width between Inner Plates : 0.310 ihch
- Pin Diameter : 0.156 ihch
- Inner Plate Depth : 0.472 ihch
- Plate Thickness : 0.059 ihch
- Average Tensile Strength : 4000 lb
10 FOOT 41 ROLLER CHAIN
- Pitch : 0.500 inch
- Roller Diameter : 0.306inch
- Width between Inner Plates : 0.346 ihch
- Pin Diameter : 0.141 ihch
- Inner Plate Depth : 0.591 ihch
- Plate Thickness : 0.051 ihch
- Average Tensile Strength : 2400 lb
25-60 ROLLER CHAIN CUTTER PULLER TOOL
- TOOL APPLICATIONS: Roller Chain Tool Kit for 25, 35, 41, 40, 50, 60, 05B, 06B, 08B, 10B, 410, 43, 65, 415, 42, 415H, 420, 423, 428, 28H, 520, 530, 25H, 40H, 50H, 60H, C2040, C2042, C2050, C2052, C2060, C2062, A2040, A2050, A2060
Power Transmission Roller Chains
- High Quality Go Kart Chain, Mini Bike Chain.
- Standard Roller Chain for most brands. 35 Chain, 40 Chain, 41 Chain.
- Go Kart Chain Tools, Go Kart Chain Tensioners and Master Links.
- #25-60 Roller Chain Cutter / Chain Breaker / Chain Detacher
- # 25-60 Chain Puller / Chain Holder / Chain Tensioners
Carrie
Reviewed in the United States on July 2, 2022
The chain quality is excellent. The included chain breaker is subpar. It is not durable enough for this size chain. It failed on the second pin of the first link we were working on. We needed to purchase another heavier duty breaker to accommodate this size chain.
Tina C.
Reviewed in the United States on July 10, 2022
Worst chain break tool I’ve ever used. Both tips provided broke immediately and did more damage to the chain than actually getting it apart.
Mike
Reviewed in Canada on August 9, 2021
Bien remplacer l’ancienne
Travorrhone
Reviewed in the United States on August 21, 2021
Used it for my go cart perfect fit Plenty of chain and the tools worked great
Brandon Dekker
Reviewed in the United States on August 10, 2021
Breaks chains pretty good. But the pin pusher doesn’t quite go far enough for the chain that came with it #35. So pins had to be pulled out with another tool. Would be perfect if the pusher stuck out just a little further. The chain is strong and have had no issues with it.
Rob ohde
Reviewed in the United States on January 5, 2021
I like how it all came in one kit pretty cool and the 10 foot of chain was not the best quality but it was not really bad either it has a little more side to side play and that turns in to all over play but as of my now working with out any problems the link buster and chain holder work good also for the price and what all you get for that price I'd buy it again so if you need a couple feet of chain or all 10 feet this is a good deal have fun and be safe happy new year everyone
ashiejoy
Reviewed in the United States on January 1, 2021
The tools that come with it make it completely worth the purchase if you need some #40 chain.
Stashu
Reviewed in the United States on July 7, 2020
I ordered this kit with a #35 chain. The chain appears to be well made. The chain breaker works well but it helps if you clamp one edge of it in a vise. Otherwise, you seem to run out of hands to hold and manipulate the chain and breaker at the same time. The chain stretcher, intended to pull the two ends of the chain together to facilitate insertion of the master link, has a bit of a problem. The range of adjustment is insufficient to draw the ends closely enough together to install the master link. Therefore, I must assume that the same would be true when trying to use it on a #25 chain. It looks like it would be workable on chains larger than #35. I can't speak to durability as I have not yet run the planer on which I installed the chain.
C Ravi Myers
Reviewed in the United States on June 3, 2020
The chain worked fine. The breaker took a couple of tries, but got the job done. The holder/puller did not work well. It would not close tight enough to get the master link in. I had pull in addition to using the puller to get the master link into place.
Recommended Products