Your cart is empty.
Your cart is empty.Product Description
Product Description
The Eylar 57” inch Mil-Spec elite protective long rifle hard case is designed to secure your rifles for transport or storage. Two low profile, reinforced solid roller wheels allow quick and effortless transport of the heaviest loads. Two folding, crushproof drag handles for rolling and 2 person hand carrying. Injection molded from reinforced high pressure polypropylene plastic that is waterproof and crushproof. Adaptive pressure equalization valve to release built up air pressure allowing for atmospheric compensation when transported at high / low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed applying pressure to a rubber gasket that is molded to the perimeter of the case. IP67 Fully submerged waterproof protection for up to 1 meter. Resistant to extreme heat and freezing cold with a working temperature range of -20° F (-29 ° C) to 140° F (60 ° C). This hard gun case comes with 4 layers of foam designed to keep your valuables and rifles firmly in place, 1 fully customizable pull & pluck cubed foam layers, 1 solid foam layer, 1 solid bottom pad layer and 1 layer of egg-crate foam padding for the lid. Six press & pull snap latches secure the full length of the 57” inch long case. Fit up to 3 long rifles securely with a deep inner storage area of : 54.58" x 15.58" x 8.63" inches. Two pad lock adaptable fittings allow for secure storage at home or on the go. Featuring edge to edge crushproof protection up to 3,000 lbs of directly dispersed weight. Uniform ridges on the top and bottom create a in line stackable design for multi case transport.
1/4" Padlock Hasps
Secure valuables inside this case by added up padlocks to the 1/4" padlock hasps.
Pressure Equalization Valve
Open the pressure valve to allow captured air pressure to equalize when traveling at different altitudes.
6 Latches
6 Latches are built into the case for maximum seal.
Justin Diercks
Reviewed in the United States on June 19, 2024
The case arrived to my door and the box looked like it went 12 rounds with Mike Tyson. I opened up the box and one of the closures had snapped off while in transit. I did want to see if it would fit everything I needed it for, which it did. However, upon further inspection, the case walls are too thin to be able to stand up to airline tossing. While it may be TSA approved, I wouldn't trust this case to stand up to the beatings I know it would take from baggage handlers. I've used many other brands of similar cases and never once gave them a second thought. If you're transporting from the house to the range in your car, then MAYBE. If you really want your pew pews taken care of on a flight, stay away from this cheaply made, yet very expensive case.
Bam Bam
Reviewed in the United States on February 27, 2024
I Love this case! However, as other patrons have stated, it has 1 Vital design flaw. It requires more than a handle on each end. This case gets Extremely heavy and difficult to move if you don't have it a specific way. So, like other persons have done, I added 2 handles, rather than 1. This way I can get some much needed assistance when lifting out of my truck, or whatever else I'm moving it.Well Built, Rugged as all get out, and Thick Walls to accommodate the additional handles.Definitely worth it, if you don't mind the 3-5 minutes it takes to install the additional handles.
Dave
Reviewed in the United States on February 13, 2024
This will easily fit 30 or 32” barrels. The dimensions are correct. Well made i would trust this case for my competition equipment.The only complaint is the case doesn't have a side handle so maneuvering it around a small area is kind of awkward, I didn't realize not being able to carry it like a suitcase would be so inconvenient. But thats the only design flaw I can complain about. In all i’d give it 4.9 stars.
MY Shoppin’ Reviews
Reviewed in the United States on January 21, 2024
This holds a 26” barreled rifle very well. I like the pulls outs, hold on to them as you may need to glue some back in. Larger chunks the better but take your time. Very well built case, a solid purchase.
az**hm
Reviewed in the United States on July 9, 2023
This is a great case and the punch out foam made fitment a snap. If you are careful you can remove the cut out in one piece, then replace it for other items. This is a heavy case, and when loaded w a 40 lb bench rest system it’s just plain heavy. As other users mentioned given the weight it would be a huge bonus if there were a mid case (on the opening side) handle. I added one and it works great just for simple tilting/maneuvering the case. Be sure to check/Locktite all the hardware. I lost a screw (I know what you are thinking :-)) first time out.You spent the $$$$$ on a weapon system incl optic - pony up for a hood case. $ well spent.
Lance H.
Reviewed in the United States on March 29, 2023
I like the case, quality is good and its size is the reason I bought this model. But the lack of another carry handle on the side make carrying this monster a problem, you have to bear hug it in the middle of the case where its lacking the handle to raise or lower it into a vehicle or on to a bench.
allen walsh
Reviewed in the United States on April 9, 2023
This case is awesome. It fit my Savage 110 FCP HS 338 Lapua perfect. I can also put any of my other rifles in it. It's heavy duty! I love the pluck system. I am definitely buying a smaller one for some of my other rifles.
lewis watkins
Reviewed in the United States on October 1, 2021
The case arrived no damage to the box. Opened it being very excited just receiving a sharps 45-110 this was the case I needed. The problem they call it a 2 man carry case problem both handles were missing the pins for attaching the handles.
Recommended Products