Your cart is empty.
Your cart is empty.Product Description
9Pcs Small Engine Compression Tester Pressure Gauge Automotive Car Test Kit
-- Ideal for a wide range of applications on many Petrol Gas engine cylinders for most spark plug types on cars, trucks, motorcycles, lawn mowers & more. It's definitely value for money! You'll able to get a fairly wide range of functions.
PACKING LIST
- 1x Pressure Gauge
- 1 X Spark Plug Tester
- 1x Straight Push-on Connector
- 1x Angled Push-on Connector
- 1x 16.75" Extension Hose with 14MM Connector
- 4x Adapter M10, M12, M14, M18 (Male, with O-ring)
- 1x Detailed Instruction
- 1x Customized Blow Molding Case with foam
Universal Car and Motorcycle Engine Testing Tools for Cylinder Pressure Gauge
NOTE:
Please always release the pressure and reset the gauge before disconnecting the compression test.
Ensure that the cylinder pressure does not exceed the maximum range of the gauge.
Not for most diesel engine, due to the low pressure range 0-300PSI.
MAINTENANCE:
- 1.Before use, check the components for misalignment, cracks and any other conditions that may affect the accuracy of the operation.
- DO NOT USE DAMAGED EQUIPMENT.
- 2.Clean with a damp cloth using a mild detergent or solvent.
- 3.Keep the kit dry and store these tools in carrying case in a dry location.
GAS COMPRESSION TESTER PRESSURE GAUGE:
OPERATION
1. After the engine is running to normal temperature, stop the engine and disconnect all spark plug wires, clean all spark plug wells.
2. Remove the air filter and set the throttle plates to the wide open position.
3. Disconnect the ignition system and install the push-on connector , or screw the assembled hose into the spark plug hole. (Hand tighten only, DO NOT use a wrench, DO NOT over tighten) Then connect the gauge by the quick connector. Make sure all connections are fully engaged.
4. Crank the engine for at least 5 compression strokes until the pressure reading no longer changes. Record the pressure reading, then press the button (release valve) to relieve the pressure.
5. Repeat the above steps and measure each cylinder 2 to 3 times to ensure measurement accuracy. Don't forget to reset the gauges and crank the engine each time. The removed parts should be put back in place after the operation, especially before engine running.
Triple-scale Gauge
- Engine cylinder tester with precision manufacturing.
- Professionally tested,checking compression on petrol engine quickly and accurately.
Rubber-cone Adapters
Rubber cones ends for quick check (no need to thread into head) without any need for threading
Brass Adapters
- Completed Kit comes with adapters for most applications
- With sealed O-ring
- Corrosion resistant, durability and no leaks
Portable Case
- Come with detailed instruction.
- Come with sturdy blow molding case, convenient to store and carry
Excelente producto.
Reviewed in the United States on August 17, 2024
El producto es bastante práctico, muy completo y de buena calidad de construcción. Recomendado
Yerson R
Reviewed in the United States on January 5, 2024
Falta probarlo pero por el momento la calidad es muy buena en los materiales
Forrest
Reviewed in the United States on August 19, 2022
It’s alright.
Recommended Products
$359.95
$ 99 .00 $99.00
$249.00
$ 99 .00 $99.00