Your cart is empty.
Your cart is empty.Energy Suspension 2.3106G Front Control Arm Bushing Set for Jeep TJ , black
Matthew
Reviewed in the United States on December 2, 2018
I was just about to finish the installation when I realized there were two missing bushings... Make sure you do a check on your parts list before you start this job. Now I'm waiting for the replacement to arrive..
MissTJMoore
Reviewed in the United States on August 20, 2016
The only reason I gave this a 4 instead of a 5 star, is purely for the labour factor. As a few people have said before me, these are just the bushings and not the actual metal sleeves. So you have to get the old rubber out of the metal sleeve to put these in. Nothing that a hot, direct flame and a hammer couldn't deal with. We heated the metal bushing whilst still attached to the control arm, and used the metal pins to knock out the old rubbers using a hammer. It was a long job, probably would take a day or just a bit more to complete all 8 control arms. The product is actually really awesome and a very reasonable price. I would definitely recommend it if you're up for the labour!
Bender
Reviewed in the United States on July 6, 2016
have to say it seems like a perfect thing, (the engineering quality is great, installation is painful)2 major problems (you don't remove the actual bushings, you take the rubber inserts out of them and thats good and bad)1. removing the inside of the bushings on the differential, they are fused to the bushing collar and need to be removed using something that can scrape the rubber off of the inside - very very pain full. (mine were really good quality and likely didn't need replacement)2. the lower track arm front bolts just need to be cut off - test to see if they come out as the first step, if they don't buy new ones and get ready to cut the bolts on both sides, or you will waste two hours of pure pain.(get a masonry bit to drill out the bushings, it brings it out in chunks, make about 5 holes around the collar they will pop out after that)
brian clay
Reviewed in the United States on January 11, 2016
Excessive installation process, not helpful call center, charge for return. Only buy if you're willing to burn out the rubber and breath in toxic fumes.
Boomer
Reviewed in the United States on April 26, 2016
If your looking for a solid replacement bushing, buy these!!!!! Just make sure you heat the old bushings up till you hear them start to sizzle. They'll press right out without the need to mess up the outer metal sleeve. Only took me a few hours to replace, went smoothly. This was with replacing front and rear
Andrew Blake
Reviewed in the United States on April 29, 2015
Product came as advertised. The bushing were very easy to install but the old ones do not come out very easy. I had to use a torch, drill, ball joint press and a big hammer to remove the old bushings.
Troy
Reviewed in the United States on June 11, 2014
The quality of the bushings is great. I gave it a 3 because you have to reuse the metal sleeves from the old bushings. Getting the old bushings out of the sleeves was a real pain. Something that should have taken 2 hours took me 8. I would have paid more for bushings that come with the sleeves if I had to do it over again. Shipping was fast and on time. Instructions needed a little bit of time to decipher as they were very cryptic.
onenut
Reviewed in the United States on December 28, 2014
Use heat to remove old rubber from parts...did not listen to this when I started putting these in and it was a pain..used heat...and guess what the old rubber pratically fell out...you will need some skills and better tools than a my little pony tool kit...but they worked for me
Recommended Products
