Your cart is empty.
Your cart is empty.Product Description
Dual 7" 3RU Rack Monitors
D71 PLUS are extremely thin and lightweight. Dual 7"3RU Rackmount Monitor 4K HDMI SDI 1920x1200IPS, viewing SD, HD and 3G-SDI video on 3RU rack monitor.With GPIO for Software control via Ethernet connection
FEELWORLD Rack mount LCD monitor has been widely used in all levels of TV news production, post production, programme broadcasting and TV broadcasting trucks, special vehicles video surveillance and other fields
Since this series is working with other adjacent professional equipments, therefore, the high stability, high reliability and electromagnetic compatibility are very important conditions to make sure the whole system work smoothly
Enjoy Consistent Images from Any Perspective
D71 PLUS uses an IPS panel, which provides a wide 160°/160° viewing angle and brightness output of up to 450nit. This means you’ll be able to see accurate, consistent and bright images from any point of view.
Easy to operate, time-saving
Consistent design style, the same function and operation mode setting is one of the features of the products. Users only need to know one product operation mode, you can operate the full range products, time-saving and convenient.
Multiple Inputs and Outputs
SDI / HDMI / CVBS / Audio Each LCD of D71 monitor supports: Input: 3G-SDI X 1 HDMI X 1 CVBS X 1 Auido (L/R) X 2
Output: 3G-SDI X 1 HDMI X 1 CVBS X 1
Audio: Stereo Headphone
Network Control
D71 PLUS rack mount Monitor includes a LAN port,This allows the operator to Software control via Ethernet connection (software included). The rear panel LAN 100 port connects the unit to the LAN.
Once connected, the user simply locates the IP address of any one of the units connected to the LAN. This is accomplished by going to the MAIN MENU of any of the connected units and selecting the NETWORK CONFIGURATION submenu.
This willthen display the IP address of that unit. Simply type this IP address into the address bar of your Software. It is possible to poll your LAN for all other units connected by accessing the NETWORK tab from the Top Menu.
The user can then control multiple networked D71 PLUS monitor at once using a single Software. The user may select which monitor(s) they wish to control and send commands to those particular monitors. The browser provides real-time status of any connected monitor, ensuring consistent signals / feeds and so forth.
3-color Tally Light
DB-9 input signal There are front TALLY lights for each screen, with 3 colors display (Red,Green,Yellow), and controlled via DB-9 ports on the rear panel.
Stablity and Reliability
1. 2x7 Inch 1920x1200 full HD IPS screen
2. Intuitive buttons + new menu interface, convenient to operation
3. 3RU rack mount design, easy to mount on TV wall or broadcast truck
4. Upload custom 3D-LUT, preview film look
5. With Waveform, Vector scope, RGB Histogram, Focus Assist, Monochrome etc. functions, help you accurately exposure and focus every shot
6. Connect to Ethernet remotely adjust the monitor via software
7. Front panel built-in 3 colors TALLY indicator, enhance shooting cooperation
8. Multiple signal ports (HDMI/3G-SDI), meet different needs.
9. Power using included 12-volt supply or use standard 4-pin XLR
10.As rack mount LCD monitors usually in a continuous working condition, all components including LCD panel must be accordance with industrial quality standard. Full Metal case not only makes the product more robust, and durable, but also is a good solution to the heat dissipation problem.
Pete
Reviewed in the United States on February 12, 2024
Monitors seem to lose SDI signal every 15min or so. Replaced cables, sources, even progressive vs. interlaced signal type. One display does it first, then the next. Unit went in a small fly pack with an ATEM switcher. The signal looped out of unit stays solid on extended displays and projectors - conclusion after troubleshooting - monitors have a sync issue. Same issue with the 5" three x set.
Recommended Products