Your cart is empty.
Your cart is empty.Tjd
Reviewed in the United States on July 9, 2024
The only thing that would make it better, is a set of manifold bolts. It does come with 2 bolts for manifold to exhaust, but not the 6 for head to manifold. Has a very good gasket.
sam calo
Reviewed in the United States on May 9, 2024
Installation of a breeze, zero issues, great item's.
Terry G.
Reviewed in the United States on November 10, 2024
Fit like it should , no more leak!
Jean giachino
Reviewed in Canada on January 11, 2024
I ordered for a friend and he was very satisfied with it!
Sparky San Diego
Reviewed in the United States on May 28, 2023
Needed to replace a cracked exhaust manifold on my 2008 Jeep Wrangler. Found this on Amizon and purchased it. Quick delivery as usual. In the box was the manifold with the heat shield, gasket and two bolts to attach the exhaust. The fit was good and made for quick work. No more leaks.
prab
Reviewed in Canada on March 11, 2023
Fits perfectly
Jason
Reviewed in the United States on April 13, 2022
The manifold fit perfectly and is very good quality. I took a flat file to the mating surface to verify the gasket would have a flat sealing surface before installation. I did not use the included gaskets, I purchased a high quality gasket set to make certain this was the last time I had to make this repair. Great product for a great price, Iād purchase it over again.
Andrew R.
Reviewed in the United States on August 4, 2021
Product was delivered as expected. Does not come with new mounting bolts so you may want to get those as well but it bolted right on with no issues. Good price, good product.
Customer
Reviewed in Canada on September 2, 2020
Been on for a month fit was good , ports matched as good as oem that was removed. Hopefully it stays crack free!
Troy A Fraser
Reviewed in Canada on March 29, 2020
Fit perfect no adjusting or modifying needed. Cheaper than my local parts store
Sc2266
Reviewed in Canada on February 12, 2020
Fit was great, these seem to be an upgrade from OEM
Customer
Reviewed in the United States on October 6, 2017
NOT OF OEM QUALITY!!! Bought both passenger and drivers side manifolds to replace mine on my Wrangler that had cracks, when looking at purchasing OEM they were 235$ each from the stealership so i opted to go with these OEM replacements at 170$ for both. After getting these i matched them up with my OEM and these are just pathetic OEM representations, take a look at the photo i have attached, the port size on these are so much smaller in diameter that it will restrict the exhaust enough that you will see a decrease in performance and there not even the same size and are very rough castings. I ended up sending them back and went and got the OEM, sometimes you do get what you pay for.
Raul's Reviews
Reviewed in the United States on April 4, 2015
Great Price compared to many, the heat shield is only place where I feel they cut corners on this exhaust manifold but I used it, cause I was worried using stock shield would just add another rattle to my 2010 Jeep Wrangler. Construction of it was nice, nothing to call home about, but an excellent stock replacement for the price and speed of delivery.Wasn't to hard to install on my 2010 Jeep Wrangler Sport 2dr, wear gloves(I should have and cut myself a few times in tight spaces), make sure you use a penetrating spray on bolts of old exhaust manifold a few hours before(Night before even better), you may try to loosen the old bolts and they can crack if they're too seized (engine space is tight as is you don't want to be trying to remove a bolt shank out of your engine as well). For jeep make sure you have a few extensions and at least one swivel/U-bolt socket. I used 2 swivels sockets and a very small cordless impact gun to limit torque, M12 Milwaukee to be exact, and varying extensions depending on what bolt I was removing, you'll need about 20" extension to easily get the bolts at exhaust pipe from below vehicle. I forget exact torque specs I set everything to but there are good write ups online to DIY it. Don't forget to buy Anti-seize for when you install the bolts on new exhaust manifold, the torque specs from Chrysler take into account that anti-seize is used, I'm not a mechanic, I just read a lot before I did this myself and went by the book with it since it was my first time changing an exhaust manifold. It wasn't hard, I was careful, did it in 30 degree weather, outdoors, in a sloping driveway, took a lot of breaks, and sprayed a lot of Penetrating spray in the beginning, and it took me 3-4 hours with no experience and just some online Tutoring. It would have taken me less time if it wasn't so darn cold when I had to do it. Also, I did not reuse old bolts it was cheap enough to buy a new set right here on amazon and I wanted to get rid of the old rusty ones to avoid future decay.
Recommended Products
$158.95
$ 78 .99 $78.99